Global Scale Modeller

This is the new kit from IBG Models the aircraft is the Polish air forces gull wing fighter that was in service from 1935 to 1939 [20 escaped the German invasion and flew to Romania where they were absorbed into that country's air force] This was an all metal fighter equiped with four machine guns, two in the fuselage and two in the wings. Powered by a Bristol Mercury V engine when it was first introduced it was seen as a cutting edge fighter but sadly by 1939 she was all but obsolete being outclassed by the ME 109's of the Luftwaffer.

The kit is supplied in a sturdy box and on lifting the lid several grey styrene sprue's can be seen, I will say here that for a 1/32 scale its not that big and all the sprue's are crisply molded with no flash. The fuselage detail of panel lines and rivets is very good as are the wings with the mini corugated wing sections/rivets clearly reproduced. The engine is also finely detailed as are all the other parts. The canopy is nicely molded in clear plastic. A small amount of etch is provided along with decals for 3 different aircraft.

The instructions are on glossy paper that include a sprue map and paint at the start followed by the assembly which takes part in sub assemblys before it all comes together. There are lots of panels in the fuselage/wings that give the choice of opened or closed and the instructions are easy to follow and clear the last three pages give the colors for the 3 aircraft you can build.

All in all a nice kit and will build well I also have an etch dash board, eduard etch set and paint set for the model from aftermarket sources.

P3226434 by andrew purchase, on Flickr
P3226437 by andrew purchase, on Flickr
P3226439 by andrew purchase, on Flickr
P3226441 by andrew purchase, on Flickr
P3226443 by andrew purchase, on Flickr
P3226444 by andrew purchase, on Flickr
P3226448 by andrew purchase, on Flickr
P3226452 by andrew purchase, on Flickr
P3226455 by andrew purchase, on Flickr
P3226456 by andrew purchase, on Flickr
P3226458 by andrew purchase, on Flickr
P3226460 by andrew purchase, on Flickr
P3226462 by andrew purchase, on Flickr
P3226465 by andrew purchase, on Flickr

I wondered who would be first to take on one of these. It caught my eye when announced so it will be interesting to see how the build unfolds

RangerNeil wrote: Sun Mar 22, 2020 4:24 pm I wondered who would be first to take on one of these. It caught my eye when announced so it will be interesting to see how the build unfolds

Thanks for looking in and your comments Neil

got the wheels ,spinner, fuel tank and the engine assembled along with some supplied etch. Still quite a bit too add to the motor more soon

P3226466 by andrew purchase, on Flickr
P3226469 by andrew purchase, on Flickr
P3226470 by andrew purchase, on Flickr

Definitely getting this kit. Not often you see a parasol fighter in 1/32 and this is super high quality too.

SteelScooter wrote: Sun Mar 22, 2020 7:02 pm Definitely getting this kit. Not often you see a parasol fighter in 1/32 and this is super high quality too.

You wont be disapointed its a great kit

Engine has been undercoated and the Painted with gunmetal as per the instructions

P3236474 by andrew purchase, on Flickr
P3236477 by andrew purchase, on Flickr

Some very fine detail present

digger303 wrote: Mon Mar 23, 2020 11:50 pm Some very fine detail present

Thanks for looking in and your comments Digger. The whole kit is high in detail and it reminds me very much of a wingnut wings type build

The build continues with the cockpit frame being made up the seat added ,after market dash/radio etch set and lots of provided etch added along with the seat belts. The first three pics show the assembly before painting. The instructions call for silver as the overall color for the fuselage internals so Alclads Airframe aluminium was used here. To tone it all down a sepia wash was used.

The engine assembly was next glued to the cockpit frame and when dry added to one fuselage side then the fuselage halves were joined together. The fuel tank and fuselage surround for the tank was assembled then painted.

P3246478 by andrew purchase, on Flickr
P3246480 by andrew purchase, on Flickr
P3246482 by andrew purchase, on Flickr
P3246484 by andrew purchase, on Flickr
P3246486 by andrew purchase, on Flickr
P3246489 by andrew purchase, on Flickr
P3246491 by andrew purchase, on Flickr
P3246493 by andrew purchase, on Flickr
P3246496 by andrew purchase, on Flickr
P3246497 by andrew purchase, on Flickr
P3246501 by andrew purchase, on Flickr
P3246502 by andrew purchase, on Flickr
P3246505 by andrew purchase, on Flickr
P3246506 by andrew purchase, on Flickr
P3246510 by andrew purchase, on Flickr

Thats really nice work and the kit is looking fantastic acc well

Timplastic wrote: Tue Mar 24, 2020 7:58 pm Thats really nice work and the kit is looking fantastic acc well

Hear hear...

Thanks for looking in and your comments both

More done, the tailplane has been fitted along with the undercarriage and main wing. There was some pre-assembly to various parts but nothing major, all the fuselage covers have also been fitted now. The main spinner,wheels and engine cowl have been prepped and then undercoated and given a coat of Airframe Aluminium as has the rest of the airframe.

P3256518 by andrew purchase, on Flickr
P3256519 by andrew purchase, on Flickr
P3256521 by andrew purchase, on Flickr
P3256523 by andrew purchase, on Flickr
P3256525 by andrew purchase, on Flickr
P3256528 by andrew purchase, on Flickr
P3256530 by andrew purchase, on Flickr

Very nice work Andy, looking good. There's something very elegant about these PZL fighters with their cranked main wing. A model subject that I've never tackled but one that I hope I will one day.

Kev

The airframe looks amazing in the bare metal finish. Are you leaving it thus or overlaying the green of the box art on it??

Wow.
You're doing some amazing work here. Cockpit and bare metal look absolutely fantastic.

Fine workman ship shining through on a lovely kit...Flawless paint job

AirCadet424 wrote: Wed Mar 25, 2020 8:55 pm Very nice work Andy, looking good. There's something very elegant about these PZL fighters with their cranked main wing. A model subject that I've never tackled but one that I hope I will one day.

Kev

Thanks for looking in and your comments Kev and your right she looks like she is dancing

RangerNeil wrote: Wed Mar 25, 2020 10:37 pm The airframe looks amazing in the bare metal finish. Are you leaving it thus or overlaying the green of the box art on it??

Hi Niel

It looks good as it is as you say but she will be getting a coat of Polish Khaki and light blue under the wings to finish her off.

CygnusX1 wrote: Wed Mar 25, 2020 11:00 pm Wow.
You're doing some amazing work here. Cockpit and bare metal look absolutely fantastic.

Thanks for looking in and your kind words very much appreciated

digger303 wrote: Wed Mar 25, 2020 11:42 pm Fine workman ship shining through on a lovely kit...Flawless paint job

Thanks for looking in and your comments Digger its a kit I would recommend to anyone as a build to enjoy

Paints on but must say its a good match for cow pat brown Decals will go on tomorrow after the paint has dried out overnight.

P3266541 by andrew purchase, on Flickr
P3266542 by andrew purchase, on Flickr
P3266545 by andrew purchase, on Flickr
P3266546 by andrew purchase, on Flickr
P3266548 by andrew purchase, on Flickr

Lovely work as always Andy, she looks great with some colour on even if it is 'Cow Pat Brown'! Looking forward to seeing the decals go on mate and indeed the finished model. Very well done!

Kev

AirCadet424 wrote: Fri Mar 27, 2020 2:05 pm Lovely work as always Andy, she looks great with some colour on even if it is 'Cow Pat Brown'! Looking forward to seeing the decals go on mate and indeed the finished model. Very well done!

Kev

Hi Kev thanks for looking in and your comments

The decals are on so just some light weathering to tomorrow and this one is done I think. The off set upper wing decals are as per the instructions as the picture shows.

P3276558 by andrew purchase, on Flickr
P3276559 by andrew purchase, on Flickr
P3276562 by andrew purchase, on Flickr
P3276564 by andrew purchase, on Flickr
P3276566 by andrew purchase, on Flickr
P3276568 by andrew purchase, on Flickr
P3276571 by andrew purchase, on Flickr
P3276572 by andrew purchase, on Flickr
P3276557 by andrew purchase, on Flickr

There's something really nice about the shape of this craft, I might have to get one for myself, although Mirage Hobby as a manufacturer gives me night horrors.

That's a beautiful build as it stands without any weathering - well done!!. I think I will have to add this kit to my wish list!!

TheNordus wrote: Fri Mar 27, 2020 3:41 pm There's something really nice about the shape of this craft, I might have to get one for myself, although Mirage Hobby as a manufacturer gives me night horrors.

Its got very nice lines thats what caught my eye when I first saw pictures of the kit. MIrage models are part of IBG then or vise versa as a kit this one builds well and the detail is top notch.

RangerNeil wrote: Fri Mar 27, 2020 11:09 pm That's a beautiful build as it stands without any weathering - well done!!. I think I will have to add this kit to my wish list!!

Its one of those aircraft that look right in a gracefully menacing way .This would definately be in my stash if I already hadnt built her.