Global Scale Modeller

I got the body pieces painted with Tamiya grey Liquid Surface Primer thinned 1:2 with Tamiya Lacquer Thinner and Mr. Color #2 Black Gloss thinned 1:1.5 with Mr. Color Leveling Thinner. Getting ready to start the chassis and engine... going to be fun doing something with a real engine, but Revell's plastic is not close to the quality of Tamiya kits. Lots of sink holes and thinner plastic. Revell does have a lot of race cars I want to build though.

I don't think I am going to clear this car because the Mr. Color gloss black is coming out nice and shiny and the decals on the real car don't seem have clear over them.. I think my black gloss matches the real car on the box.

Oooo I'll be following this. Paints gone down well!

yes! great choice, following eagerly

LWWales wrote: Sat Jul 11, 2020 9:03 pm Oooo I'll be following this. Paints gone down well!

Bdiddy wrote: Sun Jul 12, 2020 8:09 am yes! great choice, following eagerly

Thanks guys! I will say that this is the most enjoyable build I have ever done. (hint, hint @barryf1fan ). It has been an easy build and I should be done with it quick if something unforseen doesn't come up. I'm going to get a few more of these kits and grab some other decals and do several different cars. I love working with these smaller body parts so if motorcycle kits are similar, I can't wait to start one.

Awesome mate, I think you may have convinced me to get one

Well at least we won't have to wait long to see the final reveal ahaha
Would love to see you build a few of these with different liveries

Paint looks good! I built one of these-- quite a bit different in construction from the car models I'm used to building, but a fun build, and an interesting subject.

Bdiddy wrote: Sun Jul 12, 2020 1:30 pm Awesome mate, I think you may have convinced me to get one

Well at least we won't have to wait long to see the final reveal ahaha
Would love to see you build a few of these with different liveries

Yeah, almost half the parts in the kit are not used it appears because they are for other Sprint models (nearly a whole sprue is the driver figure that I am not building on this build).. so there is not a lot of parts to assemble for this one. I'm definitely going to build as many different ones as I can find at reasonable prices. Built out of the box without doing much extra work a person could probably build one of these start to finish in a couple of days.

I hope you get one or more!

A real, genuine, model car engine! That yellow around the air filter is tape.. I still have to paint the details on top.

Panzón wrote: Sun Jul 12, 2020 1:36 pm Paint looks good! I built one of these-- quite a bit different in construction from the car models I'm used to building, but a fun build, and an interesting subject.

Thanks Mike! Yeah, I am really enjoying this! I generally only build race cars and I grew up seeing these guys at the local tracks... I've always wanted to build one.

jchrisf wrote: Sun Jul 12, 2020 9:28 pm

Bdiddy wrote: Sun Jul 12, 2020 1:30 pm Awesome mate, I think you may have convinced me to get one

Well at least we won't have to wait long to see the final reveal ahaha
Would love to see you build a few of these with different liveries

Yeah, almost half the parts in the kit are not used it appears because they are for other Sprint models (nearly a whole sprue is the driver figure that I am not building on this build).. so there is not a lot of parts to assemble for this one. I'm definitely going to build as many different ones as I can find at reasonable prices. Built out of the box without doing much extra work a person could probably build one of these start to finish in a couple of days.

I hope you get one or more!

A real, genuine, model car engine! That yellow around the air filter is tape.. I still have to paint the details on top.

That’d be pretty refreshing actually getting a model built in a few days haha
Wowee the engine is a beast, the details is amazing & looks great!

Bdiddy wrote: Mon Jul 13, 2020 2:48 am

jchrisf wrote: Sun Jul 12, 2020 9:28 pm

Bdiddy wrote: Sun Jul 12, 2020 1:30 pm Awesome mate, I think you may have convinced me to get one

Well at least we won't have to wait long to see the final reveal ahaha
Would love to see you build a few of these with different liveries

Yeah, almost half the parts in the kit are not used it appears because they are for other Sprint models (nearly a whole sprue is the driver figure that I am not building on this build).. so there is not a lot of parts to assemble for this one. I'm definitely going to build as many different ones as I can find at reasonable prices. Built out of the box without doing much extra work a person could probably build one of these start to finish in a couple of days.

I hope you get one or more!

A real, genuine, model car engine! That yellow around the air filter is tape.. I still have to paint the details on top.

That’d be pretty refreshing actually getting a model built in a few days haha
Wowee the engine is a beast, the details is amazing & looks great!

Thanks Jesse! Yes, I have all the pieces painted and ready for decals. The decals seem to be of low quality from just what I tried on the engine... they don't seem to want to release easy and crinkle up a bit... we'll see how they go down on the rest of the car. I've never had a problem applying decals before so I'm hoping and am wrong about them and this doesn't slow me down.

Here are all the pieces.. not many. I love that they put the white lettering on the tires for you. I'm also loving not having to prepare window glass :

This guys turned out well and he just uses Rustoleum spray cans. I love what he did with the tile grout powder to dust it up.


Looking for a photo of it I just realized he builds for Modelroundup or at least they use his photos.. probably send him the models for free.

Haha you’re not wrong about being able to knock it over quickly, that’s crazy how small amount of parts there are!

I’ve watched quite a lot of his videos, he uses simple techniques but a lot of his weathering & beating up of models are awesome. Yep modelroundup send him upcoming models to review & build before they hit the shelves

Love that engine! And the tyre pre painted it a nice touch!

Bdiddy wrote: Tue Jul 14, 2020 2:08 am Haha you’re not wrong about being able to knock it over quickly, that’s crazy how small amount of parts there are!

I’ve watched quite a lot of his videos, he uses simple techniques but a lot of his weathering & beating up of models are awesome. Yep modelroundup send him upcoming models to review & build before they hit the shelves

I'm starting to put it together now but my three day weekend is over. I took my time and did all that in three days. I'd have it finished today if I wasn't at work.

LWWales wrote: Tue Jul 14, 2020 12:02 pm Love that engine! And the tyre pre painted it a nice touch!

Engines are one of my favorites. The plastic in these kits is thin and doesn't always line up well so the engine, of all things, is not completely straight. I don't like having to do a lot of clean up on parts, especially engines. I've worked on older Monogram and Revell kits before and their plastic wasn't this bad. I'm still loving the kit though. I may start the second kit after this one and fix all the issues I've noticed after the fact. I've never done two builds in a row because I am usually tired of the car and ready for something new after finishing. This one is different... there really isn't much about it that is tedious.

Speaking of engines... what is everyones favorite, realistic aluminum paint for engines?

jchrisf wrote: Tue Jul 14, 2020 1:53 pm

Bdiddy wrote: Tue Jul 14, 2020 2:08 am Haha you’re not wrong about being able to knock it over quickly, that’s crazy how small amount of parts there are!

I’ve watched quite a lot of his videos, he uses simple techniques but a lot of his weathering & beating up of models are awesome. Yep modelroundup send him upcoming models to review & build before they hit the shelves

I'm starting to put it together now but my three day weekend is over. I took my time and did all that in three days. I'd have it finished today if I wasn't at work.

LWWales wrote: Tue Jul 14, 2020 12:02 pm Love that engine! And the tyre pre painted it a nice touch!

Engines are one of my favorites. The plastic in these kits is thin and doesn't always line up well so the engine, of all things, is not completely straight. I don't like having to do a lot of clean up on parts, especially engines. I've worked on older Monogram and Revell kits before and their plastic wasn't this bad. I'm still loving the kit though. I may start the second kit after this one and fix all the issues I've noticed after the fact. I've never done two builds in a row because I am usually tired of the car and ready for something new after finishing. This one is different... there really isn't much about it that is tedious.

Speaking of engines... what is everyones favorite, realistic aluminum paint for engines?

I really can’t go past the Tamiya LP’s, they’re literally the perfect paint lol. One that I saw that I’m really keen to try is Gaia Notes Star bright silver, a dude painted an engine block with it and it looked really sweet

Bdiddy wrote: Wed Jul 15, 2020 12:09 am

jchrisf wrote: Tue Jul 14, 2020 1:53 pm

Bdiddy wrote: Tue Jul 14, 2020 2:08 am Haha you’re not wrong about being able to knock it over quickly, that’s crazy how small amount of parts there are!

I’ve watched quite a lot of his videos, he uses simple techniques but a lot of his weathering & beating up of models are awesome. Yep modelroundup send him upcoming models to review & build before they hit the shelves

I'm starting to put it together now but my three day weekend is over. I took my time and did all that in three days. I'd have it finished today if I wasn't at work.

LWWales wrote: Tue Jul 14, 2020 12:02 pm Love that engine! And the tyre pre painted it a nice touch!

Engines are one of my favorites. The plastic in these kits is thin and doesn't always line up well so the engine, of all things, is not completely straight. I don't like having to do a lot of clean up on parts, especially engines. I've worked on older Monogram and Revell kits before and their plastic wasn't this bad. I'm still loving the kit though. I may start the second kit after this one and fix all the issues I've noticed after the fact. I've never done two builds in a row because I am usually tired of the car and ready for something new after finishing. This one is different... there really isn't much about it that is tedious.

Speaking of engines... what is everyones favorite, realistic aluminum paint for engines?

I really can’t go past the Tamiya LP’s, they’re literally the perfect paint lol. One that I saw that I’m really keen to try is Gaia Notes Star bright silver, a dude painted an engine block with it and it looked really sweet

I'm getting ready to order more paint. I know Paul likes AK Extreme Metal Paints (or at least he did). I think I will get a couple of those and maybe a couple of Alclad colors and see which I like best.

This car is going together fast now that all the parts are ready except for decals.

jchrisf wrote: Wed Jul 15, 2020 12:53 am

Bdiddy wrote: Wed Jul 15, 2020 12:09 am

jchrisf wrote: Tue Jul 14, 2020 1:53 pm

I'm starting to put it together now but my three day weekend is over. I took my time and did all that in three days. I'd have it finished today if I wasn't at work.



Engines are one of my favorites. The plastic in these kits is thin and doesn't always line up well so the engine, of all things, is not completely straight. I don't like having to do a lot of clean up on parts, especially engines. I've worked on older Monogram and Revell kits before and their plastic wasn't this bad. I'm still loving the kit though. I may start the second kit after this one and fix all the issues I've noticed after the fact. I've never done two builds in a row because I am usually tired of the car and ready for something new after finishing. This one is different... there really isn't much about it that is tedious.

Speaking of engines... what is everyones favorite, realistic aluminum paint for engines?

I really can’t go past the Tamiya LP’s, they’re literally the perfect paint lol. One that I saw that I’m really keen to try is Gaia Notes Star bright silver, a dude painted an engine block with it and it looked really sweet

I'm getting ready to order more paint. I know Paul likes AK Extreme Metal Paints (or at least he did). I think I will get a couple of those and maybe a couple of Alclad colors and see which I like best.

This car is going together fast now that all the parts are ready except for decals.

I got my first bottle of AK the other day - matte aluminum, I’m really keen to try it!

Hurry up & finish it, I wanna see it lol!

Bdiddy wrote: Wed Jul 15, 2020 1:09 am

jchrisf wrote: Wed Jul 15, 2020 12:53 am

Bdiddy wrote: Wed Jul 15, 2020 12:09 am

I really can’t go past the Tamiya LP’s, they’re literally the perfect paint lol. One that I saw that I’m really keen to try is Gaia Notes Star bright silver, a dude painted an engine block with it and it looked really sweet

I'm getting ready to order more paint. I know Paul likes AK Extreme Metal Paints (or at least he did). I think I will get a couple of those and maybe a couple of Alclad colors and see which I like best.

This car is going together fast now that all the parts are ready except for decals.

I got my first bottle of AK the other day - matte aluminum, I’m really keen to try it!

Hurry up & finish it, I wanna see it lol!

Give that AK a try and let me know what you think

I've recently converted to using 5 minute epoxy to glue my models together. What a difference. But I can only mix up a small batch at a time so I don't waste it before it hardens. So it is a slow gluing process but with far better results. I've been working 4 10 hour days too so it doesn't leave my much time to build or it would have been completed yesterday. But I did get most of the chassis completed.

As much as I have complained about the plastic.. so far it has fit together perfectly. The directions aren't always clear exactly where something should go but I love that they have a description of every piece. Had I built these as a kid I would have learned all about cars quicker and easier.

jchrisf wrote: Wed Jul 15, 2020 12:18 pm

Bdiddy wrote: Wed Jul 15, 2020 1:09 am

jchrisf wrote: Wed Jul 15, 2020 12:53 am

I'm getting ready to order more paint. I know Paul likes AK Extreme Metal Paints (or at least he did). I think I will get a couple of those and maybe a couple of Alclad colors and see which I like best.

This car is going together fast now that all the parts are ready except for decals.

I got my first bottle of AK the other day - matte aluminum, I’m really keen to try it!

Hurry up & finish it, I wanna see it lol!

Give that AK a try and let me know what you think

I've recently converted to using 5 minute epoxy to glue my models together. What a difference. But I can only mix up a small batch at a time so I don't waste it before it hardens. So it is a slow gluing process but with far better results. I've been working 4 10 hour days too so it doesn't leave my much time to build or it would have been completed yesterday. But I did get most of the chassis completed.

As much as I have complained about the plastic.. so far it has fit together perfectly. The directions aren't always clear exactly where something should go but I love that they have a description of every piece. Had I built these as a kid I would have learned all about cars quicker and easier.

Yep I shall let you know, I used alclads on the Miura build and was really happy with them, they spray real nice!

Mmm epoxy that’s interesting, I haven’t heard much about it, I use bob smith industries, it’s a tad pricey but the stuff is awesome.

I use Bob Smith 5 minute epoxy. It dries quick and hard but with some give if needed (dropped). My models have never been this strong before. I do use Tamiya thin liquid cement on unpainted parts but even that is not as strong as the epoxy. Only bad thing is it takes a little longer to setup than tamiya or super glue with a kicker and then you have to mix up another batch so it is a slower process.. but worth it IMO. I've got all the parts on the car except the body parts, which I still have to decal. Won't be long now.. my workspace is such a mess.. I can't get good pics. I'll be doing a deep clean after this one is finished.

urghh im too lazy lol & it sounds like a lot of effort , yep I also use the Tamiya extra thin for non painted parts. I think ill just stick to the BSI super gold + for the painted parts.

Nice one! sounds like your on the home straight now

Bdiddy wrote: Thu Jul 16, 2020 1:28 pm urghh im too lazy lol & it sounds like a lot of effort , yep I also use the Tamiya extra thin for non painted parts. I think ill just stick to the BSI super gold + for the painted parts.

Nice one! sounds like your on the home straight now

Yep, home stretch now. One more pic before I wrap this up tomorrow and post finished pics in the Gallery section. I would be finished tonight but I forgot to paint the rear wing support

I painted the hood with Tamiya Acrylic Gloss Black and the other body pieces Mr Color Gloss Black lacquer. I may start using more Tamiya Acrylics on body parts.

barryf1fan wrote: Fri Jul 17, 2020 9:57 pm

Very cool!

Almost there! Looking good.

Yes! that looks so sweet, cant wait for the reveal

Such a cool build. Can't wait to see the finished product!

BigWall wrote: Sat Jul 18, 2020 12:31 amVery cool!

Thanks Joe!

Panzón wrote: Sat Jul 18, 2020 12:43 am Almost there! Looking good.

Thanks Mike! I'm curious, what paint did you use on the body pieces of your build? It came out great.

Bdiddy wrote: Sat Jul 18, 2020 3:41 am Yes! that looks so sweet, cant wait for the reveal

Thanks Jesse! I was checking our your profile and noticed you are into guitar and music too.

I'm getting ready to build a kit guitar tube amp.. might slow down my future model car build but I'm going to take my time so hopefully it won't get in the way. I've got too many hobbies

LWWales wrote: Sat Jul 18, 2020 9:26 am Such a cool build. Can't wait to see the finished product!

Thanks and yes it is a cool build. I'm going to try and get better pics with a new concept for a photo booth when I get the office cleaned up.

jchrisf wrote: Sat Jul 18, 2020 1:04 pm

BigWall wrote: Sat Jul 18, 2020 12:31 amVery cool!

Thanks Joe!

Panzón wrote: Sat Jul 18, 2020 12:43 am Almost there! Looking good.

Thanks Mike! I'm curious, what paint did you use on the body pieces of your build? It came out great.

Bdiddy wrote: Sat Jul 18, 2020 3:41 am Yes! that looks so sweet, cant wait for the reveal

Thanks Jesse! I was checking our your profile and noticed you are into guitar and music too.

I'm getting ready to build a kit guitar tube amp.. might slow down my future model car build but I'm going to take my time so hopefully it won't get in the way. I've got too many hobbies

LWWales wrote: Sat Jul 18, 2020 9:26 am Such a cool build. Can't wait to see the finished product!

Thanks and yes it is a cool build. I'm going to try and get better pics with a new concept for a photo booth when I get the office cleaned up.

Yeah bro! boing boing yeah, I’d love to see some progress shots! I recently finished building a stratocaster, I’ve got way to many hobbies aswell

jchrisf wrote: Sat Jul 18, 2020 1:04 pm Thanks Mike! I'm curious, what paint did you use on the body pieces of your build? It came out great.

Used Createx opaque airbrush black. The Createx colors come out a semi-glossy, so, after looking at photos of the real car, I opted not to use a clear coat. The graphics on the real car appear to me to be vinyl with no clear topcoat.

jchrisf wrote: Sat Jul 18, 2020 1:04 pm I'm getting ready to build a kit guitar tube amp.. might slow down my future model car build but I'm going to take my time so hopefully it won't get in the way. I've got too many hobbies

I think many of us do: I've started learning basic electronics with an eye toward possibly adding some lighting effects to future builds. So far, mostly just breadboarding circuits, and learning how to control flash rates, brightness, and timing of LEDs, though I did just build a simple kit variable power supply. A fun way to spend time while waiting for paint to cure.

Bdiddy wrote: Sat Jul 18, 2020 1:31 pmYeah bro! boing boing yeah, I’d love to see some progress shots! I recently finished building a stratocaster, I’ve got way to many hobbies aswell

Cool.. I level my own frets and crown them and install my own electronics in my guitars. I'll be sure and take pics whilst building it.

Panzón wrote: Sat Jul 18, 2020 2:00 pm
Used Createx opaque airbrush black. The Createx colors come out a semi-glossy, so, after looking at photos of the real car, I opted not to use a clear coat. The graphics on the real car appear to me to be vinyl with no clear topcoat.

I think many of us do: I've started learning basic electronics with an eye toward possibly adding some lighting effects to future builds. So far, mostly just breadboarding circuits, and learning how to control flash rates, brightness, and timing of LEDs, though I did just build a simple kit variable power supply. A fun way to spend time while waiting for paint to cure.

I'm going to experiement with using Tamiya Acrylic flat paint mixed with lacquer thinner (which I usually do anyway) and then clearcoat it with a lacquer gloss clearcoat. Could save a ton on money and time... we'll see.

Yeah, I've thought about putting lights on some builds as well. I bought the kit below to learn Arduino so I could program some cool lighting effects, etc. But still haven't used it yet. I took an electronics class in college and learned a lot that I have since forgotten after 20 years LOL. Sure wish I would have studied electrical engineering... you're an engineer aren't you?

jchrisf wrote: Sat Jul 18, 2020 3:07 pm
Yeah, I've thought about putting lights on some builds as well. I bought the kit below to learn Arduino so I could program some cool lighting effects, etc. But still haven't used it yet. I took an electronics class in college and learned a lot that I have since forgotten after 20 years LOL. Sure wish I would have studied electrical engineering... you're an engineer aren't you?

I got my BS in engineering technology more than 40 years ago, and worked as an oilfield equipment design engineer for 4 1/2 years right out of college. No electronics, though. I worked mainly with hydraulic controls and pneumatic instrumentation (which is roughly analogous to electronics). I've seen the arduino and raspberry pi kits. Looks like you can do a lot with them, but I'm still trying to learn what the basic components do, and how to use them in a circuit.

One teaser as I was testing the setup but I want to do the rest of the photos when it is dark. I also haven't polished out the paint yet. The wings are mounted in a kinda fragile way. I might not be able to clean them up very well and they have a lot of fingerprints on them now. Definitely doing it a little different next time and I am definitely building another one of these kits soon.. It was such a pleasure to build and quick. I think I have 4 to 6 of these kits in my stash.

jchrisf wrote: Sat Jul 18, 2020 8:49 pm One teaser as I was testing the setup but I want to do the rest of the photos when it is dark. I also haven't polished out the paint yet. The wings are mounted in a kinda fragile way. I might not be able to clean them up very well and they have a lot of fingerprints on them now. Definitely doing it a little different next time and I am definitely building another one of these kits soon.. It was such a pleasure to build and quick. I think I have 4 to 6 of these kits in my stash.

That has come up so good mate, great job!
PS I sneakily did the chrome last night so will put up some pics later

Bdiddy wrote: Sun Jul 19, 2020 12:44 am

jchrisf wrote: Sat Jul 18, 2020 8:49 pm One teaser as I was testing the setup but I want to do the rest of the photos when it is dark. I also haven't polished out the paint yet. The wings are mounted in a kinda fragile way. I might not be able to clean them up very well and they have a lot of fingerprints on them now. Definitely doing it a little different next time and I am definitely building another one of these kits soon.. It was such a pleasure to build and quick. I think I have 4 to 6 of these kits in my stash.

That has come up so good mate, great job!
PS I sneakily did the chrome last night so will put up some pics later

Thanks Jesse and great job on that chrome and the interior. Your's is coming together nicely.. I can't wait to see the finished result.

I got some great shots last night and figured out the light placement etc., but it was dark and I was in a hurry, on the floor and using my iPhone so I didn't notice that the hood wasn't completely in place and tilted up so it messed up the photos. I'm going to have to redo them tonight. The room being dark made the difference to me. If I can get my garage dark enough I might be able to try again before tonight. I had also forgotten to use my anti-static brush over it after I polished it out. so there are sporatic dust pieces that look huge under the zoomed photos. That brush makes the difference too.

I did want to share one photo though because I didn't post a good shot of the engine in the car. One issue I had was putting in the oil filter lines. According to the instructions they go on after the oil pump and I could not get it to go between the hoses so I scratched off some of the perfect paint that was on the connectors and the hoses. The connectors are transparent blue and red for reference. Next time I will put this one first. I had to cut the part in half where it would be hidden underneath the pumps hoses to get it in the right place. Also, the only issue I had with the decals was the first one I used for the air filter.. I had to mask that and paint it after the decal failed. These decals felt different than any I have used in the past, but went on great.

jchrisf wrote: Sun Jul 19, 2020 2:46 pm
I did want to share one photo though because I didn't post a good shot of the engine in the car. One issue I had was putting in the oil filter lines. According to the instructions they go on after the oil pump and I could not get it to go between the hoses so I scratched off some of the perfect paint that was on the connectors and the hoses. The connectors are transparent blue and red for reference. Next time I will put this one first. I had to cut the part in half where it would be hidden underneath the pumps hoses to get it in the right place. Also, the only issue I had with the decals was the first one I used for the air filter.. I had to mask that and paint it after the decal failed. These decals felt different than any I have used in the past, but went on great.

I had the same problem on mine, but I somehow managed to twist and turn the filter line connectors exactly right so they fit between the hoses, like a key in a lock. I did it OK once to test fit, and then had a devil of a time getting it to fit when I was ready to glue. I also had to repaint the connectors once the part was in place.

Great lighting on your photo-- it really shows off the details.

Panzón wrote: Sun Jul 19, 2020 4:50 pm

jchrisf wrote: Sun Jul 19, 2020 2:46 pm
I did want to share one photo though because I didn't post a good shot of the engine in the car. One issue I had was putting in the oil filter lines. According to the instructions they go on after the oil pump and I could not get it to go between the hoses so I scratched off some of the perfect paint that was on the connectors and the hoses. The connectors are transparent blue and red for reference. Next time I will put this one first. I had to cut the part in half where it would be hidden underneath the pumps hoses to get it in the right place. Also, the only issue I had with the decals was the first one I used for the air filter.. I had to mask that and paint it after the decal failed. These decals felt different than any I have used in the past, but went on great.

I had the same problem on mine, but I somehow managed to twist and turn the filter line connectors exactly right so they fit between the hoses, like a key in a lock. I did it OK once to test fit, and then had a devil of a time getting it to fit when I was ready to glue. I also had to repaint the connectors once the part was in place.

Great lighting on your photo-- it really shows off the details.

Yeah Mike... glad you got yours in there.. my next one will go on first. It had the same issue with the front axle and trying to get it past the right side suspension. That axle should have gone on first IMO. Other than that it was a great build. Thanks for the comment on my lighting. I notice that all your photos in your portfolio look great and professional! Alex Kustov posted his setup over on another forum and I took some tips from him.

I've got the reveal posted now.
viewtopic.php?f=46&t=28678

On to the Revell Frank Iaconio Chevy Camaro Pro Stock.

I know I mentioned this somewhere in either my build or my reveal.. can't find it now but I confirmed this with another builder who said:

Actually, I built this kit too and noticed they lettered the wrong side. They lettered the inside if the tire.

So you will want to use the decals on the non-lettered side of the tire and install it correctly.. the tires will fit and look better if you do this one.