Page 1 of 1

Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Tue Dec 01, 2020 4:32 pm
by Kingdan
Image
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, December 4th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture of a current work in progress or finished kit, along with short description of the basic work done, including kit manufacturer, subject and scale, please keep it short and concise.
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!
This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.
Winners - To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address, this is just for those that have won and wish to claim their prize 😉
We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland and the Live Crew 🙂

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Tue Dec 01, 2020 8:14 pm
by barryf1fan
FINALLY

Finished off the GoodSmile Racing BMW Z4 SuperGT GT3 car! :dance:

1/24 Fujimi GSR BMW Z4 GT3 - 2012 Rd. 2 Fuji International Speedway
[This car won that race in the GT300 category :thumb2: ]
Tamiya acrylics & a few Alclad paints
Iwata HP-CS
Built OOB

Enjoyed the kit, and learned some patience with decals (UNDER-statement)! :lol:

Image

Have a good one! :cheers2:

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Wed Dec 02, 2020 12:03 am
by BigWall
I finally got the paint down on my Tamiya 1/35 Jagdtiger for the Late WWII group build. Now on to weathering!

Have a great evening everyone!

ImageJT 53 by Big Wall, on Flickr

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Wed Dec 02, 2020 1:41 am
by newjerseydamo
Tamiya 1/24 Subaru Impreza WRC 2001
Finally finished this kit after 12 months.
Carbon fiber, photo etch bits, and aftermarket seatbelts.
Tamiya and SMS paints.

Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Wed Dec 02, 2020 11:03 am
by JifJaf
Good evening Dan, I did a model thing! Calling a finish on the Academy 1/35 Jagdpanzer 38t Hetzer. Light weathering with AK pencils and assorted pigments. It is sitting on the Miniart diorama with wall base, added static grass and leaves. Relieved to finish that ambush camo pattern, but overall an enjoyable build and the first I have completed for a while.
Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Wed Dec 02, 2020 4:08 pm
by CaptainBigelow
Evening Dan. This week I finished the 1/32 Tamiya F-16CJ. OOB with the exception of the Afterburner decals. Painted with Hataka lacquer paints.

Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 2:30 am
by aur0ra145
Howdy all!

I'm making some progress on the Italeri F7F-3 Tigercat. This one is nearly finished!

Primed in Ultimate Matte Black, painted in MMP USN/USMC Sea Blue, top coat of Model Masters Semi-Gloss. Weathering to come next.

Have a wonderful weekend!

Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 8:53 am
by ForeverPlasticKits
Hi everyone

My progress on the Trumpeter 1/35 M-30 122mm russian howitzer, very nice kit to build, the paint is finished, next steps are varnish and weathering :

Image

I hope i can follow this "At the bench" tonight. Take care of yourself and relatives!

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 9:54 am
by F27pax
Good evening cheerful modellers

This evening here is the 1/72 Hasegawa Vought XF5U-1. The overall colour is SMS Dark Sea Blue over a base coat of Tamiya rattle can gloss black. It's a fragile little thing and already two of the tail fin counterweights have been claimed by the carpet monster. I'll scratch build new ones when I can work up the enthusiasm to do it.

Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 5:56 pm
by WordenB
Good Evening All

Finished the Tamiya 1/12 Yamaha YZF R1 this week. Really enjoyed making this model as a break from the cars and learnt a lot especially as I have never owned a full size motorbike. If the quality of this kit is anything to go by I can't wait to try one of Tamiya's more recent offerings.
Paints used were Ultimate primers, Tamiya LPs and a few Mr Color super metallics. Main colour is Pure Red with LP9 clear as a change from 2k, really happy with the way it polished up.
Thanks for looking, have a great evening.

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 6:24 pm
by Tankboy76
I didn't get this finished as fast as planned, but we're almost there. This is my 1/35 MiniArt M3 Grant, painted to match an 'unidentified unit' from the instructions. All the details are out of the box, but I've left out the most complicated details so I could go faster. What I did include is enough to stretch my skills. I primed with a white Tamiya spray to stick well to the PE, but the rest of the products are mission models paints. Desert Sand base coat, Azure Blue pattern/highlight, and a brown "wash" applied with a brush. After I finish the wash, we'll get a varnish and the tracks installed, and then AK sand enamel to finish.

Image

Re: Ism Friday nights live at the bench what have you been working on for **December 4th**

Posted: Fri Dec 04, 2020 6:48 pm
by onemac
1/48 Revell MQ-9 Reaper. Top coats on and undercarriage bays sprayed. I hate this kit!

Image