Global Scale Modeller

Posted: **Sat Mar 06, 2021 12:50 am**

This was my first 1/8 scale large scale model car and it was a build I will never forget, Built with friends two of which are no longer with us

R.I.P Paul and Imre.

It was a nightmare to build because nothing fitted correctly especially the body panels but It was a major learning curve for large scale builds.
hope you like what I did with her, no major mods just a few interior changes like the roof lining and seats and a few bits here and there around the engine.
o and a few extras thrown in

casper

Posted: **Sat Mar 06, 2021 12:56 am**

seats were awful so a thin grey leather was applied over the top after some work with needle files to bring out the details for the leather to adhere to.

Posted: **Sat Mar 06, 2021 12:57 am**

secret seat draw given a re-paint

Posted: **Sat Mar 06, 2021 12:59 am**

back rest

Posted: **Sat Mar 06, 2021 1:04 am**

seat piping was done with 1mm grey wire same grey as the leather, seats in future would be done with the piping wire on the inside of the leather for better results but for my first effort It came out reasonably ok I think...

Posted: **Sat Mar 06, 2021 1:07 am**

only the drivers seat and rear seat to do

casp

Posted: **Sat Mar 06, 2021 1:48 am**

rear sides also had some leather as did the rear seat, roof was lined with a nice grey fabric

Posted: **Sat Mar 06, 2021 1:50 am**

Posted: **Sat Mar 06, 2021 1:52 am**

rear window shelf in black leather

Posted: **Sat Mar 06, 2021 1:56 am**

Posted: **Sat Mar 06, 2021 1:59 am**

door panels also had some leather added

Posted: **Sat Mar 06, 2021 10:14 am**

Lovely job with the leather work!!

Having looked at De Agostini in the past I shudder to think what the kit cost you...

Posted: **Sat Mar 06, 2021 11:32 am**

Very nice work on a great looking kit! I saw the scale in the title and was still blown away with the size of the door in reference to your hand when I scrolled down to the last picture! The leather work takes it to a whole new level.

Posted: **Sat Mar 06, 2021 12:33 pm**

RangerNeil wrote: Sat Mar 06, 2021 10:14 am Lovely job with the leather work!!
Having looked at De Agostini in the past I shudder to think what the kit cost you...

Hi Neil, thank you

you can still pick up the full kits, not sure how much they are now but it set me back around 700£ with all the extras
lots of fun to build but many were assigned to the top dusty shelves of man caves or e-bay due to the badly fitting panels and colour differences between parts. Some were even re-painted in Gold

and others had the top chopped and major engine re-builds.

did some flick switches for the dash

Posted: **Sat Mar 06, 2021 12:34 pm**

BigWall wrote: Sat Mar 06, 2021 11:32 am Very nice work on a great looking kit! I saw the scale in the title and was still blown away with the size of the door in reference to your hand when I scrolled down to the last picture! The leather work takes it to a whole new level.

Posted: **Sat Mar 06, 2021 12:35 pm**

Posted: **Sat Mar 06, 2021 12:36 pm**

Bullet shield mechanism takes up most of the boot

Posted: **Sat Mar 06, 2021 12:38 pm**

Posted: **Sun Mar 07, 2021 1:49 am**

after hour of trying to get the body to fit properly, re-tapping the holes and adding stronger screws it finally went together

dont fancy doing that again.

Posted: **Sun Mar 07, 2021 1:51 am**

Posted: **Sun Mar 07, 2021 1:52 am**

Posted: **Sun Mar 07, 2021 1:53 am**

Posted: **Sun Mar 07, 2021 1:54 am**

Posted: **Sun Mar 07, 2021 1:55 am**

mark

Posted: **Sun Mar 07, 2021 12:26 pm**

Now for the fun bit

I found this Bruce Wayne silver attaché case in my sons action figure box and its the perfect size so Painted it up and added a few extras

the cash was printed both sides and counted into 500 bundles

I used some off cuts from the seats to tidy up the inside of the case and add a false bottom to cover the cash and pockets for the secret documents

The DB5 pamphlets are also printed inside with extracts from the real ones and the Top Secret folder also has documents in it

these were done and sent to me by a dear friend.

I made some gold bars from clay and gold leaf and a small crate (insignia blocked out)
Also a fire extinguisher, car jack, gun manual, remote switch.

hope you like what I did and thanks for looking
mark

Posted: **Sun Mar 07, 2021 2:06 pm**

Wow that's beautiful

Posted: **Fri Apr 02, 2021 7:13 am**

Great model Casper!
I was surprised at your comment early in this thread about the poor fit of parts on the model, considering the eventual cost and the market that it is aimed at being the screw it together assembler rather than more serious model builders like us. We tend to look at things like this as a basis to improve, like you have done. But judging by your comment I would imagine that many of the screwdriver assemblers may get a bit frustrated building it.

Regardless, it does make up into one very impressive model though especially with the extra detailing work you did and improvement of a number of the parts. I like your treatment of the attache case that you added for that bit of extra 'atmosphere'.
The James Bond Aston is such an iconic motor car, and the fore runner of all the following on famous movie and TV show cars and trucks.

Posted: **Fri Apr 02, 2021 8:34 am**

This is a work of art! Beautiful model.

Posted: **Fri Apr 02, 2021 10:59 am**

Very clever and imaginative with the breif case....well done. A great build very nice and the work you put into the chrome work around the windows certainly paid off in spades. Never seen better.

Posted: **Fri Apr 02, 2021 10:51 pm**

ChrisLX200 wrote: Fri Apr 02, 2021 8:34 am This is a work of art! Beautiful model.

Many thanks Chris

glad you like her

casp

Posted: **Fri Apr 02, 2021 10:54 pm**

digger303 wrote: Fri Apr 02, 2021 10:59 am Very clever and imaginative with the breif case....well done. A great build very nice and the work you put into the chrome work around the windows certainly paid off in spades. Never seen better.

Thanks digger

Glad you like the extras I made up. I confess the chrome work was kit supplied though I did use some metal foil and alclad chrome here and there around the engine.
casp

Posted: **Fri Apr 02, 2021 10:58 pm**

NoelSmith wrote: Fri Apr 02, 2021 7:13 am Great model Casper!
I was surprised at your comment early in this thread about the poor fit of parts on the model, considering the eventual cost and the market that it is aimed at being the screw it together assembler rather than more serious model builders like us. We tend to look at things like this as a basis to improve, like you have done. But judging by your comment I would imagine that many of the screwdriver assemblers may get a bit frustrated building it.

Regardless, it does make up into one very impressive model though especially with the extra detailing work you did and improvement of a number of the parts. I like your treatment of the attaché case that you added for that bit of extra 'atmosphere'.
The James Bond Aston is such an iconic motor car, and the fore runner of all the following on famous movie and TV show cars and trucks.

Hi Noel, thank you

everything went together well apart from the lid, Cant remember how many screws were used but it was a common problem and many people stripped or snapped the screws in the holes making the job even worst. I threaded the holes and used machine screws.
casp

Posted: **Wed Apr 07, 2021 9:01 am**

The old big Pochers were notorious for screws shearing off if the threaded holes did not have a tap ran through them beforehand. Decent machine screws were definitely the way to go, and model engineering/model railway specialist suppliers are a logical source. I would imagine that if buying in bulk it may well be worth looking at a trade fasteners supplier.

Posted: **Tue Nov 22, 2022 3:02 am**

This is awesome

Posted: **Sun Dec 11, 2022 5:19 pm**

I know this is an old thread, but does someone know if De Agostini sell this as a complete kit as opposed to a part series now?

Posted: **Fri Dec 23, 2022 7:16 pm**

A dream came true with this AMAZING kit with real material like the 1:1 scale Aston Martin, such an iconic race car from the 60s-70s and - of course - the legendary and so lovely car of James BOND!!!

Posted: **Tue Jan 02, 2024 12:55 pm**

Saw the Agora James Bond DB5 on their at Telford Nov 23 show. It is based on the later JB DB5 car used in Die Another Day
Very impressive model I have to say.
I guess it is a different kit to the De Agostini one that is probably of the original from Goldfinger.

Posted: **Tue Jan 02, 2024 8:25 pm**

ForeverPlasticKits wrote: Fri Dec 23, 2022 7:16 pm A dream came true with this AMAZING kit with real material like the 1:1 scale Aston Martin, such an iconic race car from the 60s-70s and - of course - the legendary and so lovely car of James BOND!!!

At well over £1,000 I'd hope it is amazing!!

Posted: **Tue Feb 27, 2024 10:13 am**

Now that that Agora have issued a JB007 DB5 based on the latest one with the rotating Gatling machine guns from Die Another Day again in 1/8th scale, and saw the built up one on their stand at SMW Telford last November, since my last post about it, has anyone started building the Agora one?
Hopefully their version will go together much better than the De Agostini version of the original Bond car judging by comments about fit of parts on that older kit!

Global Scale Modeller

1/8 scale Aston Martin De Agostini

1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini

Re: 1/8 scale Aston Martin De Agostini