Page 1 of 1
1/32 Lancaster B Mk I/III
Posted: Tue Sep 28, 2021 9:30 pm
by RangerNeil
If anyone is interested - and has a LARGE display space available - Border Models are releasing a 1/32 Lancaster with full interior just after Xmas. Apparently it will be released in small batches with long periods between batches.
https://www.bordermodel.com/en/Newprodu ... s/335.html
Re: 1/32 Lancaster B Mk I/III
Posted: Tue Sep 28, 2021 9:56 pm
by BigWall
MAN OH MAN! That looks like a beautiful kit!
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 12:44 am
by digger303
Pre-order at Lucky models
600 USD plus 65 to Australia.

Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 3:15 am
by BigWall
Yikes!
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 7:22 am
by Stokesy44
If I had children I'd sell them!

Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 8:20 am
by Stokesy44
It’s the Wing Nut Wings kit. Border must have bought the moulds
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 8:31 am
by RangerNeil
digger303 wrote: Wed Sep 29, 2021 12:44 am
Pre-order at Lucky models
600 USD plus 65 to Australia.
That comes in at £440.20 in UK terms. I would think as well as the hefty price you are going to need a LOT of space to display it. Wing span alone is nigh on 3 times that of a Spitfire in the same scale!!
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Sep 29, 2021 9:44 am
by digger303
RangerNeil wrote: Wed Sep 29, 2021 8:31 am
digger303 wrote: Wed Sep 29, 2021 12:44 am
Pre-order at Lucky models
600 USD plus 65 to Australia.
That comes in at £440.20 in UK terms. I would think as well as the hefty price you are going to need a LOT of space to display it. Wing span alone is nigh on 3 times that of a Spitfire in the same scale!!
Nail it to the roof....

Re: 1/32 Lancaster B Mk I/III
Posted: Thu Sep 30, 2021 12:36 am
by BigWall
Re: 1/32 Lancaster B Mk I/III
Posted: Sun Oct 10, 2021 12:51 am
by RangerNeil
OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!!

Re: 1/32 Lancaster B Mk I/III
Posted: Sun Oct 10, 2021 2:02 am
by digger303
Re: 1/32 Lancaster B Mk I/III
Posted: Sun Oct 10, 2021 2:29 am
by Twokidsnosleep
RangerNeil wrote: Sun Oct 10, 2021 12:51 am
OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!!
We are brethren, did the same on Thursday morning from Ammo
In case you missed the shite I got about it on the live show

about me needing my bumps felt

….I ordered one as well
My thinking is this:
If I don’t build it I can sell it
If you don’t order now, you may not find one or will pay far more later . Pocher kits are a good example of that
I can sell things from my stash I have lost interest in if need the $
My F’ing hobby, my f’ing money, get bent those that don’t like it
I can do or watch other things on Fridays
Re: 1/32 Lancaster B Mk I/III
Posted: Sun Oct 10, 2021 11:13 am
by digger303
Twokidsnosleep wrote: Sun Oct 10, 2021 2:29 am
RangerNeil wrote: Sun Oct 10, 2021 12:51 am
OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!!
We are brethren, did the same on Thursday morning from Ammo
In case you missed the shite I got about it on the live show

about me needing my bumps felt

….I ordered one as well
My thinking is this:
If I don’t build it I can sell it
If you don’t order now, you may not find one or will pay far more later . Pocher kits are a good example of that
I can sell things from my stash I have lost interest in if need the $
My F’ing hobby, my f’ing money, get bent those that don’t like it
I can do or watch other things on Fridays
I don't watch that show besides chewing up my limited data and speed problems. I find it a bit of a waste of time...3.5hrs is a long time. My words are "Damn them all and do as you want" if the wife says it's OK...
I can't fault your thinking and it may end up being a good investment. I'm

of anyone who secures one and thats not because of the aircraft more from the size and detail included. It looks very complete and will be a absolute stand out in any display.

Re: 1/32 Lancaster B Mk I/III
Posted: Sun Oct 10, 2021 1:34 pm
by RangerNeil
Oh - this is going to be built (in between all the Hinds....). Only concern - other than being around long enough to finish it - is where the hell to put it! Which, funnily enough, was one of the wife's more strident demands. Apparently quoting the famous line from Babylon 5 "faith manages" was entirely the wrong answer....
I managed to mollify her a bit by telling her I am going to build it as a tribute to my Uncle Les who was a tailgunner on Wellingtons and Lancasters. Be nice if someone would release flight or ground crew figure in 1/32 by the time the kit gets released - it would make for one hell of a diorama
Apparently the size concerned the manufacturers too so the outer wings can be left off for display/transport purposes? Other than this - an excellent coffee table interior?
Re: 1/32 Lancaster B Mk I/III
Posted: Sat Jan 22, 2022 1:05 pm
by Garion77
As some of you as already said it's on preorder in a few places. Saw it from a store I order from sometimes for 1100 $ CAN
so that's 645 in UK dollars or 875 in US.... and shipping should be quite expensive considering the size of the box. It was said it should be out for delivery to distributors by the end of February. so may be the situation with Mr Jackson as been settle.
Re: 1/32 Lancaster B Mk I/III
Posted: Sat Jan 22, 2022 3:31 pm
by Twokidsnosleep
Garion77 wrote: Sat Jan 22, 2022 1:05 pm
As some of you as already said it's on preorder in a few places. Saw it from a store I order from sometimes for 1100 $ CAN
so that's 645 in UK dollars or 875 in US.... and shipping should be quite expensive considering the size of the box. It was said it should be out for delivery to distributors by the end of February. so may be the situation with Mr Jackson as been settle.
Interesting . I looked the other day at the preorder and no update from Ammo
It will come when it comes…probably right after I order my metal lathe
Boy wife will be a yelling at me then

Re: 1/32 Lancaster B Mk I/III
Posted: Wed Jan 26, 2022 11:03 am
by digger303
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Jan 26, 2022 12:09 pm
by cor
RangerNeil wrote: Sun Oct 10, 2021 12:51 am
OK folks - its official!! I am in the deepest of the brownest, most smelliest, doo-doo you can possibly imagine.
Pre-ordered the Lanc from Mig-Ammo only instead of selecting paypal credit I used the direct charge - and SWMBO decided to check the bank account before I could transfer the £530 from my savings into the joint account. My ears are still ringing - but it will be worth it!!!
Classic
Re: 1/32 Lancaster B Mk I/III
Posted: Wed Jan 26, 2022 3:30 pm
by Carles
Hi there !
I´ve got mine´s from HK models already !
Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
Cheers !
Carles.
Re: 1/32 Lancaster B Mk I/III
Posted: Thu Jan 27, 2022 2:01 am
by digger303
Carles wrote: Wed Jan 26, 2022 3:30 pm
Hi there !
I´ve got mine´s from HK models already !
Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
Cheers !
Carles.
Cool, lets see some pic's....

Re: 1/32 Lancaster B Mk I/III
Posted: Thu Jan 27, 2022 11:24 am
by RangerNeil
digger303 wrote: Thu Jan 27, 2022 2:01 am
Carles wrote: Wed Jan 26, 2022 3:30 pm
Hi there !
I´ve got mine´s from HK models already !
Not sure if we are talking about the same quality but want to see it hanging from my hobby room ceiling soon !!
Cheers !
Carles.
Cool, lets see some pic's....
What Digger said!!!

Re: 1/32 Lancaster B Mk I/III
Posted: Thu Jan 27, 2022 12:53 pm
by Carles
Digger, Ranger...
Will do it when arriving at home tomorrow. Promised !
Probably posting the pictures of the unboxing process....
Cheers!
Carles.
Re: 1/32 Lancaster B Mk I/III
Posted: Fri Jan 28, 2022 5:35 am
by RangerNeil
Carles wrote: Thu Jan 27, 2022 12:53 pm
Digger, Ranger...
Will do it when arriving at home tomorrow. Promised !
Probably posting the pictures of the unboxing process....
Cheers!
Carles.
That will be interesting!! When the Border Models version ships it will be good to be able to see the two for comparison. How big is the HK box? Rumour says the BM version box is the size of a small suitcase....

Re: 1/32 Lancaster B Mk I/III
Posted: Sat Jan 29, 2022 9:54 am
by Carles
Hi Team !
As promised, here are the pics of my new 1/32 Mk1 Lancaster as I received it !
Yes, the size of the box and weight are considerable..
Many parts lovely detailed inside and all them separated in diverse bags.
What surprised me are the entire wing surfaces section in just one piece!
I pre assembled both parts of the fuselage section with some tape to have an impression of how big it is compared to the Tamiya´s 1/48..
[
[
[
[
[
Have a great day !
Carles
Re: 1/32 Lancaster B Mk I/III
Posted: Sat Jan 29, 2022 1:36 pm
by digger303
Wow it's as big as a small suitcase. The panel detail on the wings is impressive and engaging as the eye looks for more.
Do you think a metal bar would be needed to stop wing sag at the wing roots and metal landing gear.
Really nice buy...thanks for sharing.
