Jurassic Park Scene

[Twokidsnosleep]

Been on a project over the last couple weekends: an entire model done with as much 3D printing as possible
Doing a take on the crashed Jeep scene in Jurassic Park where Dennis Nedry (Newman) gets killed by the Dilophosaurus after sliding off the road in the rain while enroute to deliver stolen Dino embryos to a waiting ship at the docks.




So some jeeps tried out in a few scales. Yes these are older models with round lights. Future edit: this gets modified


Four scales of Barbasol canisters that Dennis was using to smuggle the embryos out.
I only printed the cans, but the full size with internals could be made from that file.




The dinosaur



And then the accoutrements for a little diorama


this is pretty close to the final arrangement I am thinking for the display


We shall see how this progresses

[aur0ra145]

This is really cool idea! Looks like you've made good progress so far.

[Garion77]

Really nice and original project ! This will look good and the dinosaur is amazing. Seems like your having lots of fun with your different 3d printing projects.
Why did you print everything in different sizes ?

[Tomcat64]

I think this is a great project - it really shows off different aspects of what you can do with a 3d printer and a bucket of creativity.

And it's got dinosaurs

Count me in

[Twokidsnosleep]

Really nice and original project ! This will look good and the dinosaur is amazing. Seems like your having lots of fun with your different 3d printing projects.
Why did you print everything in different sizes ?

Working out the best scale,

[Twokidsnosleep]

Continued trying to make everything I can with the 3D printer.
Made a windshield , headlights and a winch for the Jeep. Still have a license plate to do





Printed out some ferns in clear green resin, painted up the other plants green. Trio of more Dino’s too

[Stokesy44]

Cracking stuff. Great to see another odyssey from you sir

[Twokidsnosleep]

Cracking stuff. Great to see another odyssey from you sir

[Tomcat64]

Nice work mate - those three new dinos are very cool and the foliage is looking good too.

So doing the clear parts with the 3d printer as well? I'm guessing that's using a clear material for the print or are there other tricks involved?

[Twokidsnosleep]

Nice work mate - those three new dinos are very cool and the foliage is looking good too.

So doing the clear parts with the 3d printer as well? I'm guessing that's using a clear material for the print or are there other tricks involved?

Yes just a clear resin.
I have a clear green and plain clear. Of all the resins, the clear ones print the most predictable…as the light can get through easily
It doesn’t make perfect windows, but then the bit I used for the windshield was just a raft base for something else so is quite thick.
I sanded and then did a Future dip to fill in any defects. It is going to get covered in blood inside anyways
If I had 3D design skills I suppose I could design a bespoke one proper dimensions and thinner

[Twokidsnosleep]

Printing out some hooks for the winch in different sizes again to work out the best scale
I also added some extra Agavae plants in case I needed more fill and to use the build plate up
It doesn’t take much extra resin to print more objects just time. But if there is a screw up, you have to redo the entire lot so I throw in some extra insurance in the form of duplicates and multiple sizing



Laid out with descending sizes, each reduced by half mm and duplicates for the sizes I think will be closest. Had one of the 0.5mm sizes fail to print full shape.



Tiny one too small, middle one just right

[Twokidsnosleep]

I am putting this one back up on the bench

I found a stl file for the yj jeep grill with the square headlights..as I am getting my azz handed to me on other sites for using the wrong jeep
Just printing out a few to scale and see if I can just add it overtop or the existing without major surgery.
It would give the jeep a bit more depth that way

[Twokidsnosleep]

Jeep transitioning to square headlights



I found some clear square lights in a scrap parts bin, no idea where they came from

[Tomcat64]

Nice to see you back on this one mate - although it's a bit of a shame you had to redo the jeep for the sake of the headlights

[Twokidsnosleep]

Nice to see you back on this one mate - although it's a bit of a shame you had to redo the jeep for the sake of the headlights

Yes
But it wasn't accurate and it was quite clear that some (on other websites) would just not let that go and honestly they are correct
If I had seen the above file earlier I would have used it, so made sense to take a few steps back and make the lights square
I don't particularly like the square light aesthetic on a jeep, but that is what the movie scene used and I am making something very specific with no leeway for artistic license or variation
SO I will fix it and that is ok

[MrBowcat]

Nice to see this one back on the bench again Scott, regardless of your headlight shape.

[psmithmags]

This is looking great and I think will be superb when fully complete. Love the comment about the windscreen 'It is going to get covered in blood anyways' Brilliant stuff
Paul S

[Twokidsnosleep]

This is looking great and I think will be superb when fully complete. Love the comment about the windscreen 'It is going to get covered in blood anyways' Brilliant stuff
Paul S

Thank yo so much

Nice to see this one back on the bench again Scott, regardless of your headlight shape.

Cheers
I have too many unfinished projects sitting on the side bench
Gotta get some done!

[Twokidsnosleep]

Jeep transgender modification process continues to a YJ
Got the License plate made...smidge over scale so it would print out and be visible



There is a gag where Nedry runs over the East Dock sign making him get quite lost as the arrow spins 360* now


Such a sign is visible in the scene I am doing and I found a file for it so……


Painted up the sign


Adding inthe sign and re-aligning the diorama set up. I like the little Dilopho’s looking around the tree, smelling where Nedry was






Hmm this orientation with the back drop might make more sense as it allows you to line up the water washout flow on the road with the photo’s water and opens up the scene more than a long bowling alley dio.

[Twokidsnosleep]

Arising from the dead, emerging from the amber and five pages deep in my postings






Paint for sign: LP Tamiya red, gloss black Tamiya paint pen and Tamiya yellow


Dock sign, Barbasol cans and the Theme Park sign

[MrBowcat]

Nice.

[BigWall]

It's looking great! Very creative

[Twokidsnosleep]

Time to get the darn base going. Been dragging my azz on it
Flocked the left side terraced hill


Then broke out the old clear silicone tube, cut off the entire nozzle to get it unplugged and blobbed some silicone water all over
Then just kept adding stuff to cover the holes and make it look like a big rainstorm

[Tomcat64]

Awesome work - I really like the way you've managed to continue the flood water from the background pic into the 3D foreground - that's brilliantly done

[Twokidsnosleep]

Dry fit teak wood edging





Tried glue stick for holding the jungle flocking…see if it works as well as PVA

[BigWall]

Spectacular!

[aur0ra145]

Hmm, the glue stick is a good idea, I'm interested to see how it goes.

[Twokidsnosleep]

Hmm, the glue stick is a good idea, I'm interested to see how it goes.

Ya it was super easy to apply and less mess than 3m spray or hand scooping white glue on
So far so good, seems to stick
I am busy trying to get Christmas projects off the ground at the mo so this will slow down again

[Twokidsnosleep]

Water white oil layers drying

[aur0ra145]

The water looks great!

[Twokidsnosleep]

The water looks great!

Thanks
I learned you can paint silicone with oils, just need to be patient to let each colour dry and then build your layers up
I think I will do water and plant spill over the wood frame edging

[BigWall]

So awesome Scott! Such a great idea and execution

[Twokidsnosleep]

So awesome Scott! Such a great idea and execution

Thank you
I am just so slow building, it takes me ages.
I am sure it all looks like the same pictures over and over

[Twokidsnosleep]

I am getting really close here. Trying to not keep showing the same photos over and over
The back and side drops are made, cut and partly installed. Cardboard backed photos glued and then stapled to the base

Just some small detail painting and a good couple focused hours to tie everything together and finish it off

[psmithmags]

Superb work Scott . The attention to detail is fantastic. I'm sure I'm not the only one looking at the photos with a big grin on their face.

[Twokidsnosleep]

Superb work Scott . The attention to detail is fantastic. I'm sure I'm not the only one looking at the photos with a big grin on their face.

Thank you...your comment makes my day

[Twokidsnosleep]

All done with this now


The project started as a challenge to myself to 3d print a diorama topic. No pre-existing kits and no money spent of 3d files
Everything I used was available online as free stl files and I made modifications to fit my needs and scale.
I spent no money other than resin, silicone, paint supplies and time; most of that I had already in hand except the time
From a Purist viewpoint, one could say I should have printed absolutely everything, background and stand included..bugger off too fiddly, I can use existing diorama methods and materials.
There is always more I could have added…bar lights on the Jeep and LED’s to light it, denser foliage in the jungle, thick clear spray to duplicate heavy rain.
But sometimes the motivation, purpose and desire is not there

I will do a little video and post it up


3D printing is an adjunct to classic modelling not a replacement for it

[Twokidsnosleep]

Here we go video summary

[Tomcat64]

That's superb work mate

I've loved this project from the initial concept, through the way you figured out all the different elements & reworked where necessary and then brought the whole thing together.

Absolutely brilliant to see the finished article - great job

[Twokidsnosleep]

That's superb work mate

I've loved this project from the initial concept, through the way you figured out all the different elements & reworked where necessary and then brought the whole thing together.

Absolutely brilliant to see the finished article - great job

Thank You
You know me, I see all the warts and not the smooth skin
So much more I could do to it, but not much motive

[Twokidsnosleep]

Little spin off project from this, making a plant terrarium
Not my work this is from Pinterest


So Terry the T-Rex needs some dental work, missing teeth in the maxillary arch


Added some razor sharp tooths to Terry’s gaping maw





Now will have to find a glass receptacle and some cool Euphorbias at the garden Center next weekend

[digger303]

Cool work, love the glass idea. I like the eye especially it almost looks alive.

[Twokidsnosleep]

Terry the Terrifying Tyrannosaurus’ Terrarium