Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post Reply
Phillip1
Master Sergeant
Master Sergeant
Posts: 388
Joined: Sun Jan 02, 2022 11:03 pm
United States of America

Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Phillip1 »

Fellow Modelers,

Attached are photos of my Trumpeter 1/32 scale TBF-1 “Battle of Midway” Avenger finished in 2011. The Trumpeter kit is excellent and very well engineered. It is a complex kit to build, but not a difficult kit to build. Converting the Trumpeter TBF-1C to an early production TBF-1 required the following:

>Re-locating the middle fuselage windows-
>Adding a “gun trough” on the right side fuselage behind the engine cowling for the .30 caliber gun-
>Scratch building a second cockpit behind the pilot section, including basic flight controls-
>Removing all panel lines, holes and rivets of the .50 caliber guns in the wings-
One modification not added was the small canopy fairing between the turret and main canopy section. I believe the only way to do this is by vac-forming a clear piece over the turret, and then doing some serious cutting and shaping.
Other added details include photo-etched seatbelt details, stretched sprue levers and landing gear brake lines.

The model carries the marking of “8-T-1” (Bureau Number 00380), which was the first Avenger delivered to the U.S. Navy and the sole survivor from the VT-8 land-based attachment at Midway. I included the red and white rudder stripes and red circles on the star insignia, which is the scheme the airplane had from late March to mid-May 1942 (see attached photo below). By the time the Battle of Midway took place (June 4th-6th), the rudder stripes had been painted blue and the red circles painted white. The only other marking change was that the fuselage star insignia size was increased.

“8-T-1” was heavily damaged during the battle and made a crash landing with just one main landing gear down. The pilot who flew the plane at Midway was Ens. Albert Earnest. His crew was RM3/c Harry Ferrier (radioman/tunnel gunner) and SEA1/c Jay Manning (turret gunner). Manning was killed and the other two wounded. A post battle inspection showed the airplane had been hit by at least sixty-four 7.7mm bullets and nine 20mm cannon shells. It was not repaired and returned to service due to the extensive damage.
If you Google "Avengers at Midway" one of the results that should come up is an extended article written in 1995 by Mr. Earnest detailing his training with VT-8, and what happened to him at Midway. It is a very informative and inspiring article. Ens. Earnest was awarded two Navy Crosses at Midway. One for his determined attack against the Japanese fleet, and the other for bringing his aircraft back intact for post combat evaluation. Ironically when Earnest returned to Midway he was twice waved off from landing because it was thought his one wheel landing might block other planes from the landing strip. He was ordered by radio to go to a higher altitude and bailout, but his radio was damaged and he never heard that order. He later said he would not have done that anyway. For anyone interested, there were several photos taken of "8-T-1" after the battle that can be found on the Internet. I hope you enjoy the photos.

Phillip1

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Imagehow to make screen shot
Image
Image
Image
Image
Image
Image
Image
Image
capture
Image
Image
Image
Image
Image
Image
Imagescreenshot on pc
Image
Image
Image
Image
Image
Image
User avatar
digger303
General
General
Posts: 16667
Joined: Mon Mar 16, 2015 10:01 am
Location: Western Australia
Australia

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by digger303 »

Very nice factory build.
:bow:: :bow:: :bow::
:cheers2:
Listen and appear wise
Image
Image

scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
Image
BigWall
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2961
Joined: Sun Mar 15, 2020 11:44 pm
Location: Denver, Colorado
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by BigWall »

Looks great! It's nice to hear the history too.
Joe

Image
Phillip1
Master Sergeant
Master Sergeant
Posts: 388
Joined: Sun Jan 02, 2022 11:03 pm
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Phillip1 »

BigWall/digger303-Thanks for the compliments!

Phillip1
Garion77
Warrant Officer
Warrant Officer
Posts: 1386
Joined: Fri Jul 08, 2016 2:15 pm
Location: Terrebonne, QC, Canada
Canada

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Garion77 »

Nice paint job !
Was it a good kit ? it's a plane I love. I have it in 1/48 in my stash but would love to get my hand on good 1/32 version
Francis

Image


At the bench
Tamiya's 1/72 F-16 and 1/48 Skyraider
User avatar
aur0ra145
Second Lieutenant
Second Lieutenant
Posts: 3161
Joined: Thu Jan 14, 2016 9:44 am
Location: TX
Contact:
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by aur0ra145 »

This is really well done! A true testament to your dedication and skill. :th: :cheers2:
Phillip1
Master Sergeant
Master Sergeant
Posts: 388
Joined: Sun Jan 02, 2022 11:03 pm
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Phillip1 »

Garion77-Thanks for the compliment. It is an excellent kit to build. Like most Trumpeter kits I think it is over-engineered (i.e., too many parts) but the detail is great. Since it has a folding wing option, getting good alignment takes more time and effort. In 1/32 scale it is a huge model so it is impressive when finished.

aur0ra145-Thanks very much for the kind words.

Phillip1
ForeverPlasticKits
Command Sergeant Major
Command Sergeant Major
Posts: 895
Joined: Wed Oct 21, 2020 8:45 pm
Location: France
France

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by ForeverPlasticKits »

Straight from the factory, so nice paint and build, no mistake! :thumb1: :thumb2: :clap:
psmithmags
Sergeant
Sergeant
Posts: 121
Joined: Sun Jul 21, 2019 11:44 am
England

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by psmithmags »

Superb build and painting. The cockpit looks brilliant with the attention to detail. Thanks for the background info as well :th:
Paul S.
Thanks
Paul S.
Phillip1
Master Sergeant
Master Sergeant
Posts: 388
Joined: Sun Jan 02, 2022 11:03 pm
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Phillip1 »

ForeverPlasticKits/psmithmags-Thanks very much for the compliments!

Phillip1
User avatar
bfrd
Site Admin
Site Admin
Posts: 1993
Joined: Tue Aug 01, 2017 11:43 am
Location: Carrollton, TX
Contact:
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by bfrd »

Weathering is a cool effect, but seeing a nice clean plane is awesome. The details aren't hidden or distracted away.
Matthew (or Bifford if you prefer)
Stash
User avatar
Twokidsnosleep
General
General
Posts: 18481
Joined: Thu Aug 07, 2014 4:07 pm
Location: BC,Canada
Canada

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Twokidsnosleep »

Fantastic paint work :th:
Excellent modelling :banana:

:clap:
Scott

On, Under or near the desk
Mr Tamiya Memorial build...Alfa Romeo Bt-46
Phillip1
Master Sergeant
Master Sergeant
Posts: 388
Joined: Sun Jan 02, 2022 11:03 pm
United States of America

Re: Finished Photos of Trumpeter's 1/32 Grumman Avenger TBF-1 (Battle of Midway Survivor)

Post by Phillip1 »

bfrd/Twokidsnosleep-Thanks for the compliments!

Phillip1
Post Reply

Return to “Air Gallery”