Page 1 of 2

The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Wed Mar 06, 2024 5:47 am
by Twokidsnosleep
Starting out my thread
Image

Bit of a weird kit, but it suits the egg build no scale and campy style
Lots of red sprue
Image
Some chrome
Image
Super weird instructions
Image
Image
Image

We will see how deep I go into this. Maybe right out of box, maybe lots of modifications. Time will dictate

Re: The Baron’s Fokker

Posted: Wed Mar 06, 2024 5:58 am
by Twokidsnosleep
Is the Iron Cross an issue posting with photos or is it ok?
Not sure wrt swaztica and such
Got some research photos of other builds
Image

Image

Image

The wheels and tires are an issue for me, might have to mess with them

Re: The Baron’s Fokker

Posted: Wed Mar 06, 2024 7:28 am
by Stokesy44
You're ok with the old imperial markings, rest easy Sir.

Funfdecker Fokker - that is just brilliant. Although I dont subscribe myself, I always enjoy this time of year and the egg builds :th:

Re: The Baron’s Fokker

Posted: Wed Mar 06, 2024 11:02 pm
by DRUMS01
Very neat classic (old) kit. I look forward to seeing it done.

Re: The Baron’s Fokker

Posted: Wed Mar 06, 2024 11:39 pm
by Twokidsnosleep
Stokesy44 wrote: Wed Mar 06, 2024 7:28 am You're ok with the old imperial markings, rest easy Sir.

Funfdecker Fokker - that is just brilliant. Although I dont subscribe myself, I always enjoy this time of year and the egg builds :th:
Ok great
Just had a panic we were going to get cancelled!

Re: The Baron’s Fokker

Posted: Thu Mar 07, 2024 5:14 pm
by Twokidsnosleep
Kinda my starting point ideas
ImageImage

Starting with the prop
Wood effects with silver tips and new bolts is the plan
Yellow/tan primer, W/N burnt umber

Image

Image

Image

Image

Re: The Baron’s Fokker

Posted: Fri Mar 08, 2024 12:44 am
by aur0ra145
:th: Oh wow, nice job on the prop!

Re: The Baron’s Fokker

Posted: Fri Mar 08, 2024 1:51 am
by Twokidsnosleep
aur0ra145 wrote: Fri Mar 08, 2024 12:44 am :th: Oh wow, nice job on the prop!
Thanks
Needs a couple days left alone for the oil to cure fully
Image
Haven’t used that meme in a bit

Re: The Baron’s Fokker

Posted: Fri Mar 08, 2024 8:21 pm
by Twokidsnosleep
Glued the Baron head together and filled the gaps..my Bondo putty tube is drying out seems that is going around
I took the chrome off the helmet as it was scratched, sprue connections visible and the spire on top looked stupid
So will remake the spike and paint it like the research shows

Image

Image

Image

Image

Re: The Baron’s Fokker

Posted: Fri Mar 08, 2024 8:54 pm
by Twokidsnosleep
Literally 30 seconds in the gel oven cleaner and the chrome is gone!Image

I think O will take some parts to the office and media blast them with fine aluminum oxide. They are way too smooth for cast metal parts.

Side effect: the oven cleaner gets rid of all the leftover 3D printing resin that was building up on this glass container that is used to rinse my printed stuff off with IPA. Like clean as a whistle :D :whistle:

Re: The Baron’s Fokker

Posted: Sat Mar 09, 2024 8:48 am
by WordenB
This has stirred up some memories so following with great interest. I remember building this kit many, many years ago, checking Scalemates it was most probably when it was first issued in 1971.

Re: The Baron’s Fokker

Posted: Sat Mar 09, 2024 6:11 pm
by Twokidsnosleep
WordenB wrote: Sat Mar 09, 2024 8:48 am This has stirred up some memories so following with great interest. I remember building this kit many, many years ago, checking Scalemates it was most probably when it was first issued in 1971.
Yes I see that date on the instructions
This is a re-issue kit for sure

Re: The Baron’s Fokker

Posted: Sat Mar 09, 2024 10:19 pm
by Twokidsnosleep
Seams and injector pin mark removals..super boring
I added a little dash and gauges for some cockpit interest

Image

Image

Image

Image

Re: The Baron’s Fokker

Posted: Sun Mar 10, 2024 10:41 pm
by aur0ra145
Nice looking Fokker so far. I used to have it in my stash; but, I think it donated it to the local kids club around here. Your additions look great!

Re: The Baron’s Fokker

Posted: Mon Mar 11, 2024 8:14 am
by Stokesy44
Even on an Egg build you're adding those little bits of magic. The IP is a really nice touch :th:

Re: The Baron’s Fokker

Posted: Tue Mar 12, 2024 12:44 am
by Twokidsnosleep
The styrene on this is weird. Soft and smooth, it doesn’t hold the ultimate/stynylrez primer very well. Everything slides off the surface
So I decanted off some white and grey Tamiya fine surface primers so I can airbrush them
Will surface texture the entire aircraft for better paint grip.

Image

Image

I am planning a red/white version of the aircraft with a proper rotary engine . Will see what I do with the wheels

Image

Image

Re: The Baron’s Fokker

Posted: Tue Mar 12, 2024 1:25 am
by Twokidsnosleep
I am going to take the engine towards this
Image

Some prop work done

Image

Re: The Baron’s Fokker

Posted: Tue Mar 12, 2024 7:43 am
by Stokesy44
Prop looks nice and you're building an engine?

You really are the king of the tinkerers. Even an egg plane gets the full treatment. Bravo! :th:

Re: The Baron’s Fokker

Posted: Tue Mar 12, 2024 8:34 am
by cor
The prop looks excellent

Re: The Baron’s Fokker

Posted: Thu Mar 14, 2024 1:48 am
by Twokidsnosleep
Stokesy44 wrote: Tue Mar 12, 2024 7:43 am Prop looks nice and you're building an engine?

You really are the king of the tinkerers. Even an egg plane gets the full treatment. Bravo! :th:
Just going to move the spark plugs to the sides and add the exhaust tubes
Always F with the Fokker :D

Re: The Baron’s Fokker

Posted: Thu Mar 14, 2024 7:55 am
by Stokesy44
Here's the famous Fokker joke for anyone who likes a giggle on a Thursday morning:

The famous (fictional) S/Ldr Paderewski was visiting a famous girls school and was asked by the head teacher to describe a typical combat action.

"Vell - I vas flying along in my Spitfire when I spotted these fokkers in the distance, I dived on them and shot two of the fokkers down, then did a quick roll, came up underneath them and shot down another couple of fokkers - the other fokkers then flew away home in panic"

As the girls were giggling at this the head teacher said - "Of course what S/Ldr Paderewski means by fokkers is that these were German Focke Wulf 190s, isn't that correct S/Ldr?"

"Yes, but in this instance, these fokkers were Messerchmitts"

:lol: :lol: :lol: :lol: :lol:

Re: The Baron’s Fokker

Posted: Thu Mar 14, 2024 12:32 pm
by cor
Stokesy44 wrote: Thu Mar 14, 2024 7:55 am Here's the famous Fokker joke for anyone who likes a giggle on a Thursday morning:

The famous (fictional) S/Ldr Paderewski was visiting a famous girls school and was asked by the head teacher to describe a typical combat action.

"Vell - I vas flying along in my Spitfire when I spotted these fokkers in the distance, I dived on them and shot two of the fokkers down, then did a quick roll, came up underneath them and shot down another couple of fokkers - the other fokkers then flew away home in panic"

As the girls were giggling at this the head teacher said - "Of course what S/Ldr Paderewski means by fokkers is that these were German Focke Wulf 190s, isn't that correct S/Ldr?"

"Yes, but in this instance, these fokkers were Messerchmitts"

:lol: :lol: :lol: :lol: :lol:

hilarious

Re: The Baron’s Fokker

Posted: Fri Mar 15, 2024 2:44 am
by Twokidsnosleep
cor wrote: Thu Mar 14, 2024 12:32 pm
Stokesy44 wrote: Thu Mar 14, 2024 7:55 am Here's the famous Fokker joke for anyone who likes a giggle on a Thursday morning:

The famous (fictional) S/Ldr Paderewski was visiting a famous girls school and was asked by the head teacher to describe a typical combat action.

"Vell - I vas flying along in my Spitfire when I spotted these fokkers in the distance, I dived on them and shot two of the fokkers down, then did a quick roll, came up underneath them and shot down another couple of fokkers - the other fokkers then flew away home in panic"

As the girls were giggling at this the head teacher said - "Of course what S/Ldr Paderewski means by fokkers is that these were German Focke Wulf 190s, isn't that correct S/Ldr?"

"Yes, but in this instance, these fokkers were Messerchmitts"

:lol: :lol: :lol: :lol: :lol:

hilarious

:lol: :lol: :lol:

Re: The Baron’s Fokker

Posted: Fri Mar 15, 2024 8:58 pm
by Twokidsnosleep
Alternate view of an angry Snoopy

Image

I took all the parts to work and strategically sandblasted the smoothy smooth off of them

Image

Image

Re: The Baron’s Fokker

Posted: Sat Mar 16, 2024 7:00 am
by Stokesy44
Good call on roughing up the surface. Could have been a bit of a horror show trying to lay down paint on that. Even misting it on might have been hard.

Snoopy looks like he's up for it. That's definitely a 'kill no capture' mission by the look of it. Highly doubtful prisoners will be taken. Snoops is kicking butt and taking names :lol: :lol:

Re: The Baron’s Fokker

Posted: Sat Mar 16, 2024 3:09 pm
by bfrd
Stokesy44 wrote: Sat Mar 16, 2024 7:00 am Snoopy looks like he's up for it. That's definitely a 'kill no capture' mission by the look of it. Highly doubtful prisoners will be taken. Snoops is kicking butt and taking names :lol: :lol:
I don't see a pencil... I think he is just kicking butt!

Re: The Baron’s Fokker

Posted: Sat Mar 16, 2024 7:33 pm
by aur0ra145
Twokidsnosleep wrote: Fri Mar 15, 2024 8:58 pm Alternate view of an angry Snoopy

Image

I took all the parts to work and strategically sandblasted the smoothy smooth off of them

Image

Image
I have that picture in my guest bathroom!

Image

Re: The Baron’s Fokker

Posted: Wed Mar 20, 2024 2:17 pm
by Twokidsnosleep
Messing with machine guns
Image

Image

Super delicate gunsights, I broke a few….which is why I print duplicates and fill the build plate

Image

A quick black prime with a brush on a broken one just to get a feel
Image

Then a dry brush and mock up
Image

Found my Tamiya gun metal X-10 paint is dead in its bottle…congealed and clumpy. Worried there are a few that will have gone off like this.

Re: The Baron’s Fokker

Posted: Thu Mar 21, 2024 3:08 am
by Twokidsnosleep
Do we remember Sunday Funny Papers? Full page coloured print
It was all of the newspaper I was ever interested in as a kid
Image

Re: The Baron’s Fokker

Posted: Thu Mar 21, 2024 3:11 am
by Twokidsnosleep
Vickers machine gun
Image

Image

Image

Snoopy is armed and dangerous

Image

Image

Image

Re: The Baron’s Fokker

Posted: Thu Mar 21, 2024 3:26 am
by DRUMS01
Loving this extra work on the Egg Build, please update us more...

Re: The Baron’s Fokker

Posted: Thu Mar 21, 2024 7:47 am
by Stokesy44
Cracking 3d print skills. Those MGs look superb :bow::

Re: The Baron’s Fokker

Posted: Thu Mar 21, 2024 2:12 pm
by Twokidsnosleep
DRUMS01 wrote: Thu Mar 21, 2024 3:26 am Loving this extra work on the Egg Build, please update us more...
Stokesy44 wrote: Thu Mar 21, 2024 7:47 am Cracking 3d print skills. Those MGs look superb :bow::
Thanks guys!
These two characters have been rattling around in my head since childhood so deserve a good little dio or vignette
Sometimes you get lucky with finding a good 3D design and it prints out so easily..sometimes not.
Pretty happy with both types of guns

Re: The Baron’s Fokker Vs Snoopy and his Doghouse

Posted: Fri Mar 22, 2024 2:32 am
by Twokidsnosleep
Red Baron’s parts going Red……decanted Tamiya TS-8
Just a gorgeous paint to spray and lovely deep colour

Image

Image

Image

Guns getting Ultimate grey prime

Image

Re: The Baron’s Fokker Vs Snoopy and his Doghouse

Posted: Fri Mar 22, 2024 7:28 am
by Stokesy44
That's a very sexy red right there. Tamiya's red is a beautiful color.

And those MGs look awesome with the primer on, they will look gorgeous when painted.

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Sun Mar 24, 2024 5:19 am
by Twokidsnosleep
Got the guns painted and then installation figured out
Image

I used a small Phillips screw on the underside for some mechanical hold, but had to modify the deck to fit the underside changes
Image

Image

Tail decals done and all this is just rough fitting

Image

Image

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Sun Mar 24, 2024 6:31 am
by digger303
:th: :th: :th:
:cheers2:

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Sun Mar 24, 2024 7:39 am
by Stokesy44
Those guns really look the business. A great addition.

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Sun Mar 24, 2024 5:19 pm
by Twokidsnosleep
Sunday Funnies


Image

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Thu Mar 28, 2024 4:45 am
by Twokidsnosleep
Starting some engine mods
Research pics:
Image

Image


Changes to the heads soldering some rounds and sectioning them off
Image

The copper pipe planning out
Image

I am making some spark plugs as well

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Thu Mar 28, 2024 7:49 am
by Stokesy44
Cool additions especially since its so visible :clap:

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Wed Apr 03, 2024 5:43 am
by Twokidsnosleep
Back to the grind after a long weekend away
Managed to get off early from work and steal an extra hour of bench time. Did some copper wire bending and some soldering for the Baron’s engine details

Image

I have a plan for some spark plugs and their wire too

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Wed Apr 03, 2024 6:08 am
by digger303
:th: :th: :th:
:cheers2:

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Wed Apr 03, 2024 7:43 am
by Stokesy44
Oh, me like.

Me like a lot! :th:

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Thu Apr 04, 2024 3:13 pm
by Twokidsnosleep
Doing some more wood effects
The smooth red styrene wing supports were filed with a metal file to give wood surface texture
The wheel supports had the same treatment of filing, then tan primer and burnt umber oil paint

Image

Image

If you haven’t seen….

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Fri Apr 05, 2024 5:56 am
by Twokidsnosleep
Engine stuff
Image

Image

Image

Image

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Fri Apr 05, 2024 6:30 am
by Stokesy44
Nice detailing and good that its so prominent and easily seen.

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Sun Apr 07, 2024 3:57 pm
by Twokidsnosleep
I added a couple brass exhaust ports, perhaps not completely accurate but…
Dry fit of the schnoz

Image

Image


I made a brass insert for the prop to spin and filled the inside with a ton of lead foil to give weight and not let it tail sit.
It won’t, it is heavy!

Image

Image

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Mon Apr 08, 2024 4:56 am
by Twokidsnosleep
Sunday night funnies

Image

Re: The Baron’s Fokker Vs Snoopy’s Doghouse

Posted: Mon Apr 08, 2024 7:44 am
by Stokesy44
You cant beat a Monday morning chuckle. Perfect antidote for the Monday morning blues. :th: