Page 1 of 1

B-26 Marauder

Posted: Fri Jan 24, 2014 7:35 pm
by Mike00
Image
Image
Image
Image
My second model will be Monogram B-26 Marauder in 1/48 scale. This is a kit that I pulled out of my old kit stash. the kit is typical of a kit for the 80's, raised panel lines. It does have nice interior and a lot of parts molded in olive color. I was afraid after setting for decades that the decals would have yellowed, but to my surprise they were perfect. I hope I can do it justice.

Re: B-26 Marauder

Posted: Fri Jan 24, 2014 7:43 pm
by jmar829
I've built this exact kit in the past. It is a really nice build, but I will warn you, those decals may not be discolored, but the ones I had were really brittle and broke apart easily when I applied them. Use the kit decals with caution. Good luck! I look forward to this build.

Cheers!

Re: B-26 Marauder

Posted: Fri Jan 24, 2014 10:07 pm
by patrickroos
Im about to order this, since I have an old decal set for a Swedish Hawker Hunter, a set known to be brittle and crack.
According to what I have read on forums it works very well.

Image

[youtube]WOwU0Jph5AQ[/youtube]

:cheers2:

Re: B-26 Marauder

Posted: Fri Jan 24, 2014 10:50 pm
by Mike00
Thanks for the heads up, hopefully thing will go well.

Re: B-26 Marauder

Posted: Sat Jan 25, 2014 12:16 am
by generalgrog
Nice to see another B26...looking forward to your build.

Re: B-26 Marauder

Posted: Sat Jan 25, 2014 12:36 am
by Yellowlazer101
Looking forward to seeing the finished model, good luck

Re: B-26 Marauder

Posted: Sat Jan 25, 2014 9:32 am
by T3hGuppy
Another really nice subject.

And the info on restoring decals is very handy. :th:

Re: B-26 Marauder

Posted: Tue Jan 28, 2014 1:45 am
by Mike00
B-26G Marauder Specifications:


General

•Length: 58 ft. 3 in.
•Wingspan: 71 ft.
•Height: 21 ft. 6 in.
•Wing Area: 658 sq. ft.
•Empty Weight: 24,000 lbs.
•Loaded Weight: 37,000 lbs.
•Crew: 7


Performance

•Power Plant: 2 × Pratt & Whitney R-2800-43 radial engines, 1,900 hp each
•Combat Radius: 1,150 miles
•Max Speed: 287 mph
•Ceiling: 21,000 ft.


Armament

•Guns: 12 × .50 in. Browning machine guns
•Bombs: 4,000 lbs.


B-26 Marauder - Design & Development:


In March 1939, the US Army Air Corps began seeking a new medium bomber. Issuing Circular Proposal 39-640, it required the new aircraft to have a payload of 2,000 lbs, while possessing a top speed of 350 mph and a range of 2,000 miles. Among those to respond was the Glenn L. Martin Company which submitted its Model 179 for consideration. Created by a design team led by Peyton Magruder, the Model 179 was a shoulder-winged monoplane possessing a circular fuselage and tricycle landing gear. The aircraft was powered by two Pratt & Whitney R-2800 Double Wasp radial engines which were slung under the wings.


In an effort to achieve the desired performance, the aircraft's wings were relatively small with a low aspect ratio. This resulted in a high wing loading of 53 lbs./sq. ft. in early variants. Capable of carrying 5,800 lbs. of bombs the Model 179 possessed two bomb bays in its fuselage. For defense, it was armed with twin .50 cal. machine guns mounted in a powered dorsal turret as well as single .30 cal. machine guns in the nose and tail. While initial designs for the Model 179 utilized a twin tail configuration, this was replaced with a single fin and rudder to improve visibility for the tail gunner.


Presented to the USAAC on June 5, 1939, the Model 179 scored highest of all of the designs submitted. As a result, Martin was issued a contract for 201 aircraft under the designation B-26 Marauder on August 10. Since the aircraft was effectively ordered off the drawing board, there was no prototype. Following the implementation of President Franklin D. Roosevelt's 50,000 aircraft initiative in 1940, the order was increased by 990 aircraft despite the fact that the B-26 had yet to fly. On November 25, the first B-26 flew with Martin test pilot William K. "Ken" Ebel at the controls.

Accident Issues:


Due to the B-26's small wings and high loading, the aircraft had a relatively high landing speed of between 120 and 135 mph as well as a stall speed of around 120 mph. These characteristics made it challenging aircraft to fly for inexperienced pilots. Though there were only two fatal accidents in the aircraft's first year of use (1941), these increased dramatically as the US Army Air Forces expanded rapidly after the United States' entry into World War II. As novice flight crews struggled to learn the aircraft, losses continued with 15 aircraft crashing at McDill Field in one 30-day period.


Due to the losses, the B-26 quickly earned the nicknames "Widowmaker", "Martin Murderer", and "B-Dash-Crash", and many flight crews actively worked to avoid being assigned to Marauder-equipped units. With B-26 accidents mounting, the aircraft was investigated by Senator Harry Truman's Senate Special Committee to Investigate the National Defense Program. Throughout the war, Martin worked to make the aircraft easier to fly, but the landing and stall speeds remained high and the aircraft required a higher standard of training than the B-25 Mitchell.

Variants:


Through the course of the war, Martin continually worked to improve and modify the aircraft. These improvements included efforts to make the B-26 safer, as well as to improve its combat effectiveness. During the course of its production run, 5,288 B-26s were built. The most numerous were the B-26B-10 and B-26C. Essentially the same aircraft, these variants saw the aircraft's armament increased to 12 .50 cal. machine guns, a larger wingspan, improved armor, and modifications to improve handling. The bulk of the added machine guns were forward facing to allow the aircraft to conduct strafing attacks.

Operational History:


Despite its poor reputation with many pilots, experienced air crews found the B-26 to be a highly effective aircraft that offered a superb degree of crew survivability. The B-26 first saw combat in 1942 when the 22nd Bombardment Group was deployed to Australia. They were followed by elements 38th Bombardment Group. Four aircraft from the 38th conducted torpedo attacks against the Japanese fleet during the early stages of the Battle of Midway. The B-26 continued to fly in the Pacific through 1943, until it was withdrawn in favor of standardizing to the B-25 in that theater in early 1944.


It was over Europe that the B-26 made its mark. First seeing service in support of Operation Torch, B-26 units took heavy losses before switching from low-level to medium-altitude attacks. Flying with the Twelfth Air Force, the B-26 proved an effective weapon during the invasions of Sicily and Italy. To the north, the B-26 first arrived in Britain with the Eighth Air Force in 1943. Shortly thereafter, B-26 units were shifted to the Ninth Air Force. Flying medium-altitude raids with proper escort, the aircraft was a highly accurate bomber.


Attacking with precision, the B-26 struck a multitude of targets prior to and in support of the invasion of Normandy. As bases in France became available, B-26 units crossed the Channel and continued to strike at the Germans. The B-26 flew its last combat mission on May 1, 1945. Having overcome its early issues, the Ninth Air Force's B-26s posted the lowest loss rate in the European Theater of Operations at around 0.5%. Briefly retained after the war, the B-26 was retired from American service by 1947.

During the course of the conflict, the B-26 was used by several Allied nations including Great Britain, South Africa, and France. Dubbed the Marauder Mk I in British service, the aircraft saw extensive use in the Mediterranean where it proved an adept torpedo bomber. Other missions included mine-laying, long range reconnaissance, and anti-shipping strikes. Provided under Lend-Lease, these aircraft were scrapped after the war. In the wake of Operation Torch in 1942, several Free French squadrons were equipped with the aircraft and supported Allied forces in Italy and during the invasion of southern France. The French retired the aircraft in 1947.
http://ts2.mm.bing.net/th?id=H.47222748 ... =1&pid=1.7
http://ts1.mm.bing.net/th?id=H.47604656 ... =1&pid=1.7
http://ts1.mm.bing.net/th?id=H.46721783 ... =1&pid=1.7
http://ts1.mm.bing.net/th?id=H.45685923 ... =1&pid=1.7

Re: B-26 Marauder

Posted: Tue Jan 28, 2014 2:46 am
by Mike00
Image
Image
I started on my B-26 today. The first thing was to wash the parts with Dawn dish soap and let dry. I then gave the parts to be painted a coat of Dupli-Color clear adhesion primer, this is an automotive paint product that is used to prime plastic parts when painting cars. It also works well on plastic models. I have used it and primed or just straight paint. I have had no problems spraying acrylic or oil based model paints over this primer. After the primer dried for about 15 minutes I spryed a coat of Testors Interior Green acrylic and Tamiya Flat Black, Red Brown, Khaki on the details of the fuselage. After the paint had dried a couple of hours I used an AK Interactive dark wash to create shadows. The shadows are hard to see in the photos but looks good with the naked eye.

Re: B-26 Marauder

Posted: Tue Jan 28, 2014 9:40 pm
by T3hGuppy
Really nice start on this.

The paint work on the interior came out very well. :th:

Re: B-26 Marauder

Posted: Sun Feb 02, 2014 4:46 am
by Mike00
I am working on my B-49 and thought I would finish it before I really concentrated on my B26. I was filling holes and smoothing up seams. So while the putty was drying I thought I would do a little more to the B26. I am still working on the interior of this bomber. The instrument panel is painted flat black with silver dials, I also put a drop of Vallejo gloss Varnish on all of the dials.
Image
I then weathered the flight deck and glued all of the parts seats, instrument panel, bomb sight, and forward machine gun.
Image
Image
Image
After every thing had dried I started gluing interior sub-assemblies into the right side of the fuselage. I thought I would use the kit figures, however after closer examination I close not to use them, they are terrible. I still haven't decided if I will open the bomb bay. I think I will, it might make a nice diorama.
Image
Image
Image
Image
Tomorrow I will continue sanding on the B-49 and finish the interior on the B-26 and get it closed up. The products that I used on this is a combination of Tamiya, Testors, Vallejo, and AK Interactive.

Re: B-26 Marauder

Posted: Mon Feb 03, 2014 1:55 am
by Mike00
My electricity was out for most of the day so I didn't get much done today. I did manage to glue weight in the forward fuselage. I didn't want to repeat of the B-49 tail heavy.
Image

Re: B-26 Marauder

Posted: Tue Feb 04, 2014 7:00 pm
by T3hGuppy
Cracking interior dude.

Really like the bomb sight. :th:

Re: B-26 Marauder

Posted: Thu Feb 06, 2014 12:45 am
by Mike00
Got the b-26 glued together today. Letting it dry overnight and then tomorrow start filling seams. and sanding. After everything was put together and after weighting the model it was still tail heavy, so went to the storage building to find the tackle box. After adding three large sinkers to each of the engine nacelle the Marauder was setting on it's landing gear.
Image
Image

Re: B-26 Marauder

Posted: Thu Feb 06, 2014 12:49 am
by conradschmid99
great start :th:

Re: B-26 Marauder

Posted: Thu Feb 06, 2014 12:56 am
by Piatchie
Looking fantastic! :th:

Re: B-26 Marauder

Posted: Thu Feb 06, 2014 1:10 am
by DBMiller
Sharp work on the interior! This will be nice, I don't think I've seen one built before except in one magazine.

Re: B-26 Marauder

Posted: Sat Feb 08, 2014 9:13 am
by T3hGuppy
Coming together now dude.

Nice that you caught the weight imbalance now :th:

Re: B-26 Marauder

Posted: Sun Feb 09, 2014 3:31 am
by Mike00
Image
A quick update, I glued in extra weight and she is setting as she should. This being a kit from the 1970's it has the typical fit problems. It has a couple of nasty seams along the wing and engine nacelles. More sanding in my future.

Re: B-26 Marauder

Posted: Sun Feb 09, 2014 3:50 am
by generalgrog
Wow..nice!! can't wait till I get to this part... :cheers2: :cheers2:

GG

Re: B-26 Marauder

Posted: Sat Feb 15, 2014 8:33 pm
by Mike00
I just wanted to tell everyone following my builds that I am forced to take a break. Dew to financial concerns caused by a stroke I had last year I am moving. Hopefully I can get moved and set bake up to model in the next few weeks and can finish these builds on time.

Re: B-26 Marauder

Posted: Sat Feb 15, 2014 9:06 pm
by DBMiller
Best wishes to you!

Re: B-26 Marauder

Posted: Sun Feb 16, 2014 10:05 pm
by Russ72
All the best.

Re: B-26 Marauder

Posted: Sun Feb 16, 2014 11:40 pm
by Piatchie
Best of luck! Moving sucks when you are actual moving but it's so nice when you get settled somewhere new!

Re: B-26 Marauder

Posted: Mon Feb 17, 2014 12:27 am
by generalgrog
Ahh man...hope you make it back in!!

GG

Re: B-26 Marauder

Posted: Sat Apr 19, 2014 4:58 pm
by Mike00
Image
Well guys with move done and the Steel Rain SIG and my YB-49 for the 100 Year Bomber GB done, It is time to try to finish my Monogram B-26 Marauder. After repairing some really nasty seams I sanded with fine sand paper to smooth out the scratches from the coarse grit sanding. I then gave it a coat of clear adhesion primer for plastic. This primer is an auto motive product for plastic auto parts, works well for models too. I let it dry for about 15 minutes and gave it a coat of Krylon Flat Black. This is an armor painting trick for painting shaded areas on green vehicles. I will then paint the same way as if I preshaded the panel lines, I am running out off time and I hope this will save me some time in the painting process. I guess we will see. If it works great, if not then I will know not to do that again.
Image
Yes that is an egg in the back ground. It was for the Easter Eggplane build, but time is not on my side, and it will have to wait for another time.

Re: B-26 Marauder

Posted: Mon May 12, 2014 1:17 am
by Mike00
A couple of days ago I was painting the Olive Drab and the grey under side of the B-26. When my airbrush clogged :eeek:
So it was break the brush down and soak in Lacquer Thinner overnight. the next day I cleaned my airbrush and finished the painting. I was having trouble with the finish on the Olive Drab. when I touched it I would marred the finish. After some repair work I sprayed a coat of dull coat to seal the finish. After another day of drying I was able to mask off for the Invasion stripes.
Image
This morning I painted the stripes. I will let it dry tonight and Gloss coat in the morning and decal tomorrow night.
Image

Re: B-26 Marauder

Posted: Thu May 15, 2014 6:39 am
by Mike00
I didn't get to work on my B-26 much this weekend, we took a trip to North Carolina to see my son. His birthday is Saturday and he will not be able to come home. I got to work on it today and started to weather the B-26. Tomorrow I will decal it and get it sealed tomorrow night. I just have a couple of parts to to glue on and finish weathering. This may be one of those last second shots to get finished.
Image
Image
Image

Re: B-26 Marauder

Posted: Thu May 15, 2014 4:15 pm
by DBMiller
Wow! You've really stepped it up on this build! It is coming out super, too.

Re: B-26 Marauder

Posted: Fri May 16, 2014 3:50 am
by Mike00
I started to apply the decals today, and it was a nightmare. This kit has been in my stash for about 15 years and decals were old. I coated them with liquid decal film, but they still cracked and ripped. I had a lot of problems with the decals wrinkling. After a few hours I was pulling out what hair I have left. I guess hind sight is 20/20 if I had it to do over I would have ordered new decals for this project.
Image
Image
<a href="http://s985.photobucket.com/user/mikewa ... 7.jpg.html" target="_blank"><img src="http://i985.photobucket.com/albums/ae33 ... 832af7.jpg" border="0" alt=" photo 0046_zpse6832af7.jpg" style=""></a>
Image
I have a few pieces to glue on and do a little more weathering and I will call this on done. It will be right at the deadline for this GB.

Re: B-26 Marauder

Posted: Fri May 16, 2014 4:50 am
by UKguyInUSA
Wow, she looks awesome, Mike....the pre-shading and those invasion stripes really set her off nicely! :thumb1: :thumb1:

Cheers, :cheers2:

Martin