A video build of an armour piece from start to finish. 25hrs

Post Reply
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

A video build of an armour piece from start to finish. 25hrs

Post by Coen »

The Shadow Build

This is a shadow build of Cyber-hobby's Jagdpanzer IV A/0 that I built with Youtube's Da'Mad Modeler Clint.
It's a 25 part series of an armour build from beginning to end.
It took 4 months to complete the series and over 25 hours of build time in total.
Every step and every method that I usually use to build a piece of armour is demonstrated more or less.
These are my methods, so I'm not claiming that they're the right way to do things or that they're the only way to do things.
They're just how I do things.
Clint asked me to do this for him and youtube, but I wanted to share it here with you fine folks.
You also get the sneak preview of the end.
ahaha. I'm not releasing the last three vids until the end of the week. The last three plus the slide show are still unlisted.
So no sharin until then. :)

Here is the link to the entire play list,
https://www.youtube.com/playlist?list=P ... bbQ2ZEPFzc

And these are the individual vids.

[youtube]NPxNZYkjcyQ[/youtube]

[youtube]blRnzmRgRGM[/youtube]

[youtube]UnO0KUgiGl0[/youtube]

[youtube]bd0h5SH_lI0[/youtube]

[youtube]1xdJKO-5Okw[/youtube]

[youtube]8MTyVrzIsng[/youtube]

[youtube]LjFjN6aML2Q[/youtube]

[youtube]eNffsOwRZFY[/youtube]

[youtube]4BJhMBoI3LA[/youtube]

[youtube]XUMv6YmsKNE[/youtube]

[youtube]NhuhmK5rHl8[/youtube]

[youtube]0LG7EzYTfMs[/youtube]

[youtube]yDZAytQmp-8[/youtube]

[youtube]vOc8T1cRwgY[/youtube]

[youtube]fJqfWgto3lg[/youtube]

[youtube]N1rm74s6cQY[/youtube]

[youtube]C6T102sLas8[/youtube]

[youtube]ene0Rts0Z0k[/youtube]

[youtube]vCa3uIhbWCw[/youtube]

[youtube]EHrAog__2c8[/youtube]

[youtube]z2DsgWY-r_Q[/youtube]

[youtube]2sbEIzUz2uk[/youtube]

[youtube]q3kqtMHmL4I[/youtube]

[youtube]conBKXDcynI[/youtube]

[youtube]PwaYzK9wTa8[/youtube]

[youtube]-R28pB8Nl1c[/youtube]



And the Reveal if you want to skip right to the end. :)
This one will be replaced with a longer one once Clint receives the kit in the mail as I've added a few things now

[youtube]1X3jzn6gDkA[/youtube]
Last edited by Coen on Wed Apr 23, 2014 11:19 am, edited 1 time in total.
User avatar
alextheblue
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2679
Joined: Mon Jul 15, 2013 11:30 am
Location: Slough, United Kingdom
Contact:
Scotland

Re: A video build of an armour piece from start to finish. 2

Post by alextheblue »

Mike you absolute legend!!! :banana: :banana: :banana:

Can't thank you enough for taking the time to do these vids - I'm going to savour every single minute and try to absorb as much of your modelling genius as possible in the hope that just a small smidgen might brush off on me!

As my wise old Grandpops used to tell me, "You've got two ears son so that you can listen twice as hard!"

Or something like that - wasn't really listening!!!! ;)
"Courage is feeling fear and acting anyway."

www.alextheblue.com
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

Haha... Thanks Alex.
:th:
User avatar
cib2265
First Sergeant
First Sergeant
Posts: 581
Joined: Tue Feb 18, 2014 11:12 pm
Location: QLD, Australia
Contact:

Re: A video build of an armour piece from start to finish. 2

Post by cib2265 »

As someone who is just about to start his first armour kit in 20 plus years, this is invaluable!

Also love your 1/16 Tiger videos - makes me want to go out and get one (but can't hide that box from the missus, she already suspects I have too many kits as it is!)
Chris Becker in Sunshine Coast, Australia
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: A video build of an armour piece from start to finish. 2

Post by Paul »

Pfff 25 hours is that all you could muster :nena: :tongue: ;)
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

I gave up hiding mine from my better half ages ago.
It's money that I'm spending so she's cool with it.

I tried for 70 Paul, but I'm not as young as you.
User avatar
UKguyInUSA
Second Lieutenant
Second Lieutenant
Posts: 3429
Joined: Sun Mar 30, 2014 10:19 pm
Location: New Hampshire, USA formerly Palm Beach, Florida, USA and Leicestershire, UK (until 1999)
Contact:

Re: A video build of an armour piece from start to finish. 2

Post by UKguyInUSA »

Holy Shmoley! That's a lot of hours of viewing time you developed there.....I was looking on Netflix last night for something to watch and couldn't decide on anything, I know what I'll watch every night while sitting up I bed. I hope to get to learn some painting and weathering techniques that I can begin to apply to my aircraft builds.

Thanks for sharing!

Cheers,

Martin
WIP:: Tamiya 1/48 F4U-1A Corsair

Non-WIP::Eduard 1/48 Fokker DVII, Revell 1/32 Arado AR196 and 1/32 BF109G10 Erla,
User avatar
Donkeywalloper
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2629
Joined: Sun Apr 13, 2014 8:06 pm
Location: Burton upon Trent
Great Britain

Re: A video build of an armour piece from start to finish. 2

Post by Donkeywalloper »

Thank you Coen.
Absolutely invaluable lessons and so well done.
:cheers2:
Bench:1/35 Tamiya Tiger 1 Mid Production with lots of Aftermarket Stuff
Completed: Vespid 1/72 Comet A10
Shelf: Lots (101 Kits of multiple scales) of Armour + couple of Flappy / Wing Things, found a KV2 95% built and primed four years ago. Plus a few Lego Tech kits, to help restore MoJo
mick
First Sergeant
First Sergeant
Posts: 569
Joined: Mon Feb 03, 2014 2:02 pm
Wales

Re: A video build of an armour piece from start to finish. 2

Post by mick »

tomorrows viewing is now sorted out,great work
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

Thanks fellas, I just hope that you find some use out of it.
I switched part 24 from unlisted to public this morning.
The rest I'll do over the weekend.
User avatar
MerseyTrainz
Master Sergeant
Master Sergeant
Posts: 377
Joined: Wed Oct 09, 2013 2:06 pm
Location: Wirral, Merseyside, UK
Great Britain

Re: A video build of an armour piece from start to finish. 2

Post by MerseyTrainz »

Thank you Coen,

I needed some AFV insight, although it will take me some time, to watch it all, great!!!

:th:
Best regards... Stephen (MerseyTrainz)

On the Bench... Tamiya 1/35 British Army Chieftain Mk.5 Military Model Tank (35068), Tamiya 1/35 US Army M3 Stuart Light Tank - WW2 (35042)
User avatar
rsrdevon
Sergeant First Class
Sergeant First Class
Posts: 261
Joined: Wed Nov 13, 2013 9:05 pm
Location: Janesville,Wisconsin

Re: A video build of an armour piece from start to finish. 2

Post by rsrdevon »

Very good set of videos. Lots of teaching and things to learn from them. a huge thumbs up! Thank you Mike.
User avatar
MarkVerploeg
Major
Major
Posts: 4837
Joined: Wed Oct 16, 2013 12:21 am
Location: Oss, Noord Braband The Netherlands
Netherlands

Re: A video build of an armour piece from start to finish. 2

Post by MarkVerploeg »

no :pop: this time
i need complete meals and a good chair for this
add a bucket of coffee and i can make it a marathon
On the bench
GB builds
1/35 Trumpeter M1132 ESV

Personal builds
1/35 Hobby Boss M1070 tractor with M1000 semi trailer and Meng M1A2 TUSK II Abrams
1/35 Takom V2 rocket with the Meillerwagen and SS100 tractor
User avatar
martin57
Command Sergeant Major
Command Sergeant Major
Posts: 897
Joined: Tue Apr 01, 2014 8:44 pm
Location: oundle, east northants.

Re: A video build of an armour piece from start to finish. 2

Post by martin57 »

thancks for sharing , as a new guy to returning to the hobby all your time and effort is much appreciated . that goes the same for all you guys who give up your free time to help us learn :thumb2: :clap:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

You're very welcome fellas. I'm glad that it's of use to you.
:banana:
User avatar
gaz45
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 1971
Joined: Mon Jan 06, 2014 3:35 pm
Location: Nottingham uk
Great Britain

Re: A video build of an armour piece from start to finish. 2

Post by gaz45 »

great set of video's i've watched them all never done any armour before but got a couple to practice on airfix 1:76 king tiger and cromwell mk IV using some of your techniques mate a lot of inspiration
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

I'm really glad that you found it useful Gaz!
It makes it all worth while. :)
LordFarnswaller
Sergeant
Sergeant
Posts: 160
Joined: Tue Sep 17, 2013 6:05 pm
Location: Bridgwater

Re: A video build of an armour piece from start to finish. 2

Post by LordFarnswaller »

well that's my lunchtime viewing taken care of for the next few weeks
ta Coen
On the beach:
Tamiya A10
IDF Shot Cenrurion
T80

youtube: lordfarnswaller
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

Haha... I'm happy to oblige Paul :>)
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: A video build of an armour piece from start to finish. 2

Post by Lee »

Mike, you are awesomeness personified mate - Top draw buddy :th:
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: A video build of an armour piece from start to finish. 2

Post by Coen »

Hahaha! Thanks Lee!
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: A video build of an armour piece from start to finish. 2

Post by Lee »

Holy crap! This is going to take me a LONG time to get through - Thanks buddy :th:
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
Post Reply

Return to “How To Guides + Tips & Tricks”