Global Scale Modeller

Hello everyone. This will be my build for the ISM D-Day GB:



More updates will come soon.

Jos

Here's the kit review:

[youtube]d5WLD7lyf8k[/youtube]

Then I started building the kit:


The engine


I made the seatbelts with some paper


Painting of the cockpit


Instrument panel




Joining the fuselages




Filling the gaps







Jos

Moved to the right forum for you bud

Nice start Jos

I added the wings:




Drying filler :p





Thats it for today,

Jos

Fast progress there mate, the kit looks to be a bit challenging though!

looking good so far

I saw that I had put on the back wings in the wrong way
That's fixed now

Jos

Coming along nicely - keep up the good work!

Looking great dude.

Great work so far Jos!
Nice...

Looking good mate....she's coming together rapidly!

Update video:

[youtube]pKPHOX1ZtnE[/youtube]

Jos

Hey a great build so far...nice work on cockpit

Next update:


Circle part added


Fuel tank attachment point on leeft wing has been added


Tail wheel doors added


Small parts


Landing gear


Fuel tanks


Another fuel tank attachment point and a small part on the right wing have been put on


Landing gear parts


Prop and nose


More small parts

More updates soon,

Jos

Next update: painting small parts and dry-fitting


Landing gear painted and washed with thinned down enamel paints mix (revell matt 37 brick red and revell matt 8 black)


Prop painted (haven't painted the nose cone yet)


Dry-fitting


Dry-fitting the landing gear and the prop

more updates soon ,

Jos

Dude
Make bigger pictures i'm trying to read that newspaper
Great progress mate

Nice job! Looks like filler from hell all over the place - that sucks, makes for a lot of added work.

You're doing a great job on that old kit, Jos. Keep up the good work mate.

next video update:

[youtube]oZ-a5FoCUrw[/youtube]

Ready for painting

more updates soon,

Jos

Nice one dude.

This is really shaping up now

Okay, it's time for a small update:


painted the front part yellow


Spinner painted up


Dry-fit

It's ready for the airbrush now
Thank you guys for all the comments

Jos

Nice progress on this one, Jos. I built this kit 20+ years ago. In fact I've just found the "reference drawing for decals and painting" sheet. An interesting choice of schemes provided.

New update


Painted the plane. First airbrushed and some details painted with a handbrush.


Painted the bottom (and invasion stripes). First airbrushed and then hand painted.


Here I made a little mistake. I painted invasion stripes on the top but they weren't there at the real plane. I had to paint green over it with a brush because I had already cleaned up my airbrush.


A better shot of the mistake


Landing gear painted and added


Place where te "star'n'bar" decal needs to go (I will tidy it up a bit )


The proppellor


The tail part, wich I masked with Humbrol Maskol (liquid, stinking , purple masking stuff)

More updates soon, thanks for watching

Jos

You've got some nice ideas going on here. I love the paint scheme you chose.

It seems a little rushed in places though. One thing I would recommend is that if you are brushing paint on by hand, thin it out some more. It's ok to put on several thin coats instead of trying to do everything in one coat. The advantage being that you will be less likely to see brush strokes and unevenness. When you paint small details, use the smallest brush possible. It will give you better control of your lines.

Can't wait to see it finished!!!Good Luck with the rest of the build!!

strawnobi wrote:You've got some nice ideas going on here. I love the paint scheme you chose.

It seems a little rushed in places though. One thing I would recommend is that if you are brushing paint on by hand, thin it out some more. It's ok to put on several thin coats instead of trying to do everything in one coat. The advantage being that you will be less likely to see brush strokes and unevenness. When you paint small details, use the smallest brush possible. It will give you better control of your lines.

Can't wait to see it finished!!!Good Luck with the rest of the build!!

Thanks for the advice

Jos

Sorry for being away so long, here's the new update:

[youtube]hyyL-t7Nj_g[/youtube]
Update #4 video ( new intro )


Invasion stripes on the top of the wings are now very hard to see


Exhaust painted and exhaust stain


Invasion stripes and landing gear wells


Tail with rust streaks


Landing gear, guns and drop tanks


Invasion stripes are touched-up


Three of the six machine guns

Time for decals!

Jos

Nice to see your video and the progress you are making.

What I meant by using a "small brush" is that when you have tiny details such as your window panes, or possibly details on something like an instrument panel, that's where I use a small brush. You will find though that it is much easier to mask and spray your canopies. When I started out as a kid I did it all by hand like you are doing. I just built the 1/32 Tamiya p-51 and it's up on the site. If you go back and look at the build thread, you can see how I mask stuff like the invasion stripes, other colors and canopies.

Paul's videos on YouTube are also fantastic. He does a lot of masking work. He recently did a series of basic techniques where he built a German warbird. It's in about 10 parts I think. It's well worth going through it. It covers the entire process. I've modeled in one form or another for about 30 years and I still learn stuff from him and other guys. ISM is such a great resource.

Just out of curiosity, you mentioned that you have an airbrush. Is it single or double action?

Also, you can probably find some after market decals from a company like Baracuda decal for a p-51 in that scale through Amazon or Ebay. They are awesome. I used their 1/32 set.

looks like you are getting close. Can't wait to see the finish. Good Luck!!!!!

Thanks for the advice strawnobi, i will try some of those techniques next time.

Final Reveal

A small rant:
The first time when I tried to put one of the Fujimi star and bar decals on, it broke because I wanted to correct the place of the decal but it was already stuck on the wing. I tried some star and bar decals from a kit I bought recently, the Smer 1/72 f4u Corsair ( the decals almost had the same size). I put the Smer decals in some water, let it rest, take it out and then I saw a few cracks on the decal. when i tried to get the decal from the paper, it broke completely. I tried it again with another Smer decal: same result.
I continued putting the Fujimi star and bar decals on the model, and they came out quite nice. I used some leftover Revell decal because I only had 3 ''usable'' star and bar decals and I needed 4 of them.

I wasn't very careful when putting my black enamel wash on: I broke some small parts of two decals with my fingers while holding the plane. No big deal, I repainted them and they still look okay.

Update video:
[youtube]5puWwSsMlfM[/youtube]

Here are the pics:


Cockpit added


Bottom of the plane


Decal at one of the wings


Proppellor (sorry for the unclear picture)


This is one of the decals that broke, I had to repaint a small part


The tail


Here you can see that I repainted the number ''2''

I would like to thank everybody that followed and commented on this thread, thanks for being such an awesome community!

See you later guys,

Jos

Congrats on finishing you're project!!!! There is always a sense of accomplishment when something gets finished. There are a lot of mustangs in this GB. Good Job!!! Any plans for your next project?

strawnobi wrote:Congrats on finishing you're project!!!! There is always a sense of accomplishment when something gets finished. There are a lot of mustangs in this GB. Good Job!!! Any plans for your next project?

I'm working on a small 1/76 Airfix Churchill mk.VII tank at the moment.

Jos

nicely done