Subject for next ISM Group Build....

General Modelling discusion that doesn't fit into any of the other sections
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

Me too... Chomping at the bit. I've got too much on the go at the moment so I can't.
Blah.
User avatar
Tonygol
First Sergeant
First Sergeant
Posts: 528
Joined: Fri Jun 28, 2013 9:10 pm
Location: Stoke on Trent

Re: Subject for next ISM Group Build....

Post by Tonygol »

Under Starters orders and we are...............
Tony

https://www.facebook.com/groups/tonyhobbypage/

Too much on the bench....
UKscalemodeller
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2062
Joined: Tue May 28, 2013 12:31 pm

Re: Subject for next ISM Group Build....

Post by UKscalemodeller »

Whereas my bench is empty except for a Stug that need weathering (and I'm hoping to get that done tonight.

That said my Merkava III for Aaron Newlands Isreali Youtube GB is ready to be opened as is the Saab J21A sent to me by Rob.
User avatar
Nige201980
Captain
Captain
Posts: 4095
Joined: Wed Jun 05, 2013 9:30 am
Location: Doncaster South Yorkshire UK
Contact:

Re: Subject for next ISM Group Build....

Post by Nige201980 »

Only got my mossie on the go at the mo for Alex and pazermans lemon GB and that's just sanding, sanding and more sanding.
http://www.youtube.com/channel/UCy-TGcs5u_ZXSZ9kObNfsPg


On the go at the Mo

Quite a few :banana:
Modelpro72
Master Sergeant
Master Sergeant
Posts: 381
Joined: Tue May 28, 2013 9:41 am

Re: Subject for next ISM Group Build....

Post by Modelpro72 »

Gav0909 wrote:Gannet is ugly as sin, but would make a cool model for sure!
I dated a bird that looked like the Gannet. Not much on top but had a big bottom!
Surface to Air Models
Build It. Your Way.

Get glue on your fingers. Paint on your face and don't annoy your Mum
Modelpro72
Master Sergeant
Master Sergeant
Posts: 381
Joined: Tue May 28, 2013 9:41 am

Re: Subject for next ISM Group Build....

Post by Modelpro72 »

DDDDAAAAAGGGHHHHHHHH!!!!!!!

Can I possibly start another project.

Lenny in a pickle
Surface to Air Models
Build It. Your Way.

Get glue on your fingers. Paint on your face and don't annoy your Mum
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Subject for next ISM Group Build....

Post by Paul »

Modelpro72 wrote:
Gav0909 wrote:Gannet is ugly as sin, but would make a cool model for sure!
I dated a bird that looked like the Gannet. Not much on top but had a big bottom!
LMFAO, i could lower the tone even more, but im going to behave lol :ooops:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

Modelpro72 wrote:
Gav0909 wrote:Gannet is ugly as sin, but would make a cool model for sure!
I dated a bird that looked like the Gannet. Not much on top but had a big bottom!


Oomph...shoot me ... Shoot me now :pistols: :eeek:
UKscalemodeller
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2062
Joined: Tue May 28, 2013 12:31 pm

Re: Subject for next ISM Group Build....

Post by UKscalemodeller »

Modelpro72 wrote:
Gav0909 wrote:Gannet is ugly as sin, but would make a cool model for sure!
I dated a bird that looked like the Gannet. Not much on top but had a big bottom!
Damn you Lenny, now I must go and find my Spinal tap album out.
Modelpro72
Master Sergeant
Master Sergeant
Posts: 381
Joined: Tue May 28, 2013 9:41 am

Re: Subject for next ISM Group Build....

Post by Modelpro72 »

UKscalemodeller wrote:
Modelpro72 wrote:
Gav0909 wrote:Gannet is ugly as sin, but would make a cool model for sure!
I dated a bird that looked like the Gannet. Not much on top but had a big bottom!
Damn you Lenny, now I must go and find my Spinal tap album out.
How does it go?

Big Bottoms Big Bottoms My girls got one?

Long time since i played it!!!
Surface to Air Models
Build It. Your Way.

Get glue on your fingers. Paint on your face and don't annoy your Mum
User avatar
Greg37985
Private First Class
Private First Class
Posts: 41
Joined: Sat Aug 17, 2013 8:22 pm
Location: Baschurch, Shropshire

Re: Subject for next ISM Group Build....

Post by Greg37985 »

Right I`m up for this, I've just been and purchased a Revel 1/72 Vampire.
The last 1/72 aircraft kit I purchased and built was 1/72 spitfire from RAF Cosford in 1981. and I was a spritely 12 years old and had just joined the ATC.
Kits were a bit cheaper then :cry:
I aim to get the thing built without sticking the thing to me ,the table or getting glue on my hands or paint on my face.
I wont upset my mum, but will probably lavish hours upon it and upset the wife instead! :fly:
User avatar
Daishi12
Warrant Officer
Warrant Officer
Posts: 1393
Joined: Fri Jun 28, 2013 9:25 pm
Location: Mountain Ash, South Wales
Wales

Re: Subject for next ISM Group Build....

Post by Daishi12 »

Lenny, we all know they make the rockin' world go round :)
W.I.P.

Revell 1/72 P-47M
Airfix 1/72 Bristol F2B Fighter

Technical Consultation for MrsModellor :- Tamiya 1/35 S.A.S. Pink Panther
User avatar
Emilliano
Sergeant
Sergeant
Posts: 109
Joined: Wed Jun 12, 2013 12:39 pm
Location: Mumbai, India

Re: Subject for next ISM Group Build....

Post by Emilliano »

I just purchased an Airfix DH.Vampire T.11 1/72 scale i think i should give it a go...i wanted to be a part of an ISM GB :th:
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

The more the merrier Emilliano,
User avatar
5Craven
Sergeant Major
Sergeant Major
Posts: 652
Joined: Sun May 26, 2013 6:51 pm
Location: Weymouth, Dorset, UK

Re: Subject for next ISM Group Build....

Post by 5Craven »

This meny Vampires makes this feel like a Twilight thread!
On the Bench

1/48 Revell SH-60B Seahawk (on hold)
1/72 Matchbox Supermarine Walrus II (Decalling)
1/48 Hasegawa Idolm@ster F-16C (Decals complete)
1/35 Hobbyboss ZSL-92 IFV (Building)
User avatar
schweinhund227
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2627
Joined: Fri May 24, 2013 9:51 pm
Location: Ontario,Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by schweinhund227 »

This one if for the Moderators...

I started reading from the top and my head started spinning !

maybe its old age ?

so why do you say no to stuff that is from the ERA !
the cold war wasn't just between NATO and USSR !

Both super powers supported a s h i t load of 3rd world countries... with current or older vehicles... in order to dominate the Geo-political map ! and all crises during that period of time should be included !
That's my take on the COLD WAR era !

I deeply think that what ever Rolled,Floated,Flew or shot thrum the sky during that Time Period should qualify !
it would open up so much more possibilities...

Talk over it guys and either make a compromise or stand your grounds Either way... I have enough Yanks or Russian stuff to keep me going for ions ! but I am afraid we might miss out on some incredible machines... if we don't see the bigger picture !

Anyway.... that was my 2 Canuck cents worth !

let us know ! so I can make up my mind ! LOL

all the best to you all !
may the styrene gods be kind and Beer plentiful !
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Subject for next ISM Group Build....

Post by Paul »

schweinhund227 wrote:This one if for the Moderators...

I started reading from the top and my head started spinning !

maybe its old age ?

so why do you say no to stuff that is from the ERA !
the cold war wasn't just between NATO and USSR !

Both super powers supported a s h i t load of 3rd world countries... with current or older vehicles... in order to dominate the Geo-political map ! and all crises during that period of time should be included !
That's my take on the COLD WAR era !

I deeply think that what ever Rolled,Floated,Flew or shot thrum the sky during that Time Period should qualify !
it would open up so much more possibilities...

Talk over it guys and either make a compromise or stand your grounds Either way... I have enough Yanks or Russian stuff to keep me going for ions ! but I am afraid we might miss out on some incredible machines... if we don't see the bigger picture !

Anyway.... that was my 2 Canuck cents worth !

let us know ! so I can make up my mind ! LOL

all the best to you all !
may the styrene gods be kind and Beer plentiful !
Ill be honest and that's what I would have liked, hence why I was wanting to do my tiran 5.
User avatar
schweinhund227
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2627
Joined: Fri May 24, 2013 9:51 pm
Location: Ontario,Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by schweinhund227 »

see ! I'm a s**t disturber...

We all know where the IDF is getting their funding from!!! so
:thumb2:

This will hit the fan I know but... lets be real !

:whistle:

Waiting for shower of insults to fly ... LOL !
all the best to you guys.. some pretty cool entires.... I must say !

Looking in my Stash for a good candidate !
I'm leaning Canauck CF-101 Voodoo on that one !

Thanks
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: Subject for next ISM Group Build....

Post by Lee »

Guys, iIt's quite simple, the Cold War was between East and West yes? There were pacts made by the USSR and America (the two aggressors) being the Warsaw Pact and NATO, which included many, many countries over many, many years. If that doesn't give you enough scope to build a model then I'm lost for words!
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
User avatar
DC87
Chief Warrant Officer 2
Chief Warrant Officer 2
Posts: 1799
Joined: Wed Jun 05, 2013 7:16 pm
Location: Exeter, Devon, UK
England

Re: Subject for next ISM Group Build....

Post by DC87 »

Having studied the Cold War in considerable detail I can say that simplifying/ limiting the GB to the Warsaw Pact and NATO is the best way to set the guidelines while keeping it enjoyable, which is the most important part.

Maybe in the future we could do a Middle East GB etc.
Dan C

Filling the workbench with:
Sopwith Snipe late post war
WW1 RFC SE5a

WW1-1/32 Snipe
Workbench gets full with models being built - Buys another workbench!

Image
User avatar
Daishi12
Warrant Officer
Warrant Officer
Posts: 1393
Joined: Fri Jun 28, 2013 9:25 pm
Location: Mountain Ash, South Wales
Wales

Re: Subject for next ISM Group Build....

Post by Daishi12 »

There are some iconic builds from this period....Centurion, Chieftain, Alvis 6x6, Harrier, Phantom, Tu95, MIG15 - Mig 25, A4 Skyhawk, F105, T55, T60, T80, BMP1,2,3, BTR60, 70, 80, M14, M16, Leopard, etc, etc, etc I think that restricting the build to NATO Warsaw pact is a good idea.
W.I.P.

Revell 1/72 P-47M
Airfix 1/72 Bristol F2B Fighter

Technical Consultation for MrsModellor :- Tamiya 1/35 S.A.S. Pink Panther
User avatar
Radzy
Command Sergeant Major
Command Sergeant Major
Posts: 750
Joined: Sun Jun 16, 2013 9:57 pm
Location: Warsaw, Poland

Re: Subject for next ISM Group Build....

Post by Radzy »

I think putting any restrictions would be rather pointless, just like Schweinhund said - probably 90% , maybe even more, armament around the world in this times were of either NATO countries or WP countries origins...
Whether it was Korea, Vietnam, Afghanistan, Falklands, Israeli (well... until they developed Merkava :) ) or African conflicts ... it was always a kind of NATO against WP weaponry (including sometimes also presence "supervisors" ;-) )...
WIP:
Tamiya 1:72 F4U-1 Corsair Birdcage
----------------------
My Portfolio
My YouTube Channel
User avatar
Joesdad
Warrant Officer
Warrant Officer
Posts: 1519
Joined: Wed Aug 14, 2013 9:52 am
Location: Torquay UK
England

Re: Subject for next ISM Group Build....

Post by Joesdad »

Greg37985 wrote:Right I`m up for this, I've just been and purchased a Revel 1/72 Vampire.
The last 1/72 aircraft kit I purchased and built was 1/72 spitfire from RAF Cosford in 1981. and I was a spritely 12 years old and had just joined the ATC.
Kits were a bit cheaper then :cry:
I aim to get the thing built without sticking the thing to me ,the table or getting glue on my hands or paint on my face.
I wont upset my mum, but will probably lavish hours upon it and upset the wife instead! :fly:
The prettiest of all aircraft Greg, I'm doing one at the moment mate. Not a brilliant kit, in my opinion, I've managed to break the undercarriage twice now, but she's such a lovely little thing it doesn't really matter.... Enjoy it mate :cheers2:
Yes.. It is supposed to look like that!

Tim (Ted)


British Aviation In Scale
https://www.facebook.com/groups/1185462564870290/
User avatar
Daishi12
Warrant Officer
Warrant Officer
Posts: 1393
Joined: Fri Jun 28, 2013 9:25 pm
Location: Mountain Ash, South Wales
Wales

Re: Subject for next ISM Group Build....

Post by Daishi12 »

I think the point is that the kit in question is designed, built and operated by either a NATO or WP country, and is in the markings of said country to qualify. I do appreciate that a lot of the bush conflicts of the era were supplied by either NATO or WP countries (and continue to be supplied in the same way) but counties such as Israel, Syria, Egypt, South Africa, Lebanon etc were not signatories to either NATO or the WP.
W.I.P.

Revell 1/72 P-47M
Airfix 1/72 Bristol F2B Fighter

Technical Consultation for MrsModellor :- Tamiya 1/35 S.A.S. Pink Panther
User avatar
Tonygol
First Sergeant
First Sergeant
Posts: 528
Joined: Fri Jun 28, 2013 9:10 pm
Location: Stoke on Trent

Re: Subject for next ISM Group Build....

Post by Tonygol »

When does the build thread open? Am I jumping the gun a little.
Tony

https://www.facebook.com/groups/tonyhobbypage/

Too much on the bench....
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

It's supposed to start o n Saturday 14th September. A week after the WWII ended. :th:
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: Subject for next ISM Group Build....

Post by Lee »

21st Coen - 2 weeks after the WWII GB :D
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
User avatar
Lee
Site Admin
Site Admin
Posts: 7322
Joined: Thu May 23, 2013 4:38 pm
Location: Lincolnshire
Contact:
Great Britain

Re: Subject for next ISM Group Build....

Post by Lee »

OR - If everyone's happy to start it this weekend then we can :th:

Up to you guys :D
Where does all the bloody time go.....?

Owner of Ultimate Modelling Products
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

Ah. I must have missed something along the way. I thought that it said the 14th on the first post of the topic.
I've fine with it starting this weekend, apparently some of the other fellas are as well haha.
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Subject for next ISM Group Build....

Post by Gav0909 »

Jeez guys, you have 4 months on this! Which you voted for! No rush to get it done is there lol.

I am just jealous because I haven't the money and won't have for sometime to get the things I have on my list for my entry. :( :(
User avatar
Nige201980
Captain
Captain
Posts: 4095
Joined: Wed Jun 05, 2013 9:30 am
Location: Doncaster South Yorkshire UK
Contact:

Re: Subject for next ISM Group Build....

Post by Nige201980 »

I would be more than happy to at least start the thread this weekend I would also be happy to start the build but just thread open might be good then we can get photos of the kit and history bits and bobs up ready.
http://www.youtube.com/channel/UCy-TGcs5u_ZXSZ9kObNfsPg


On the go at the Mo

Quite a few :banana:
UKscalemodeller
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2062
Joined: Tue May 28, 2013 12:31 pm

Re: Subject for next ISM Group Build....

Post by UKscalemodeller »

Gav0909 wrote:Jeez guys, you have 4 months on this! Which you voted for! No rush to get it done is there lol.

I am just jealous because I haven't the money and won't have for sometime to get the things I have on my list for my entry. :( :(
need a cold war kit Gav?
User avatar
chief5437
Major
Major
Posts: 4810
Joined: Fri May 31, 2013 1:25 pm
Location: England
England

Re: Subject for next ISM Group Build....

Post by chief5437 »

Start! Start! Start!

Only cos I'm itching to build something and don't want to start a kit that ill end up shelving while the group build is on!
Chief
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Subject for next ISM Group Build....

Post by Gav0909 »

UKscalemodeller wrote:
Gav0909 wrote:Jeez guys, you have 4 months on this! Which you voted for! No rush to get it done is there lol.

I am just jealous because I haven't the money and won't have for sometime to get the things I have on my list for my entry. :( :(
need a cold war kit Gav?

Haha yeah not got anything. But I have a specific idea so going to go with that, will just save what cash I can to get the bits I need. 4 months is plenty time for me to build what I have in mind, so I don't mind starting a month or so into the 4 months.
User avatar
Tonygol
First Sergeant
First Sergeant
Posts: 528
Joined: Fri Jun 28, 2013 9:10 pm
Location: Stoke on Trent

Re: Subject for next ISM Group Build....

Post by Tonygol »

Oooops What did I start?
Tony

https://www.facebook.com/groups/tonyhobbypage/

Too much on the bench....
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Subject for next ISM Group Build....

Post by Gav0909 »

If the date gets brought forward Tony, I want to see a thread started by you on that day with your entry in it! :nena:

And if there isn't, remember I can ban people..... :twisted: :twisted: :twisted:
User avatar
Tonygol
First Sergeant
First Sergeant
Posts: 528
Joined: Fri Jun 28, 2013 9:10 pm
Location: Stoke on Trent

Re: Subject for next ISM Group Build....

Post by Tonygol »

Oooooooh I am scared. :nena: :nena: :nena:
Tony

https://www.facebook.com/groups/tonyhobbypage/

Too much on the bench....
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

Hey now... play nice or I'll get the spoon. :bash:


What kit were you looking at Gav?
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Subject for next ISM Group Build....

Post by Gav0909 »

Have the idea of getting the new Airfix Harrier GR1 and making another diorama with it, I totaled up what the parts are likely to cost me from Models R Go and its under £30, so not a huge amount of money. Its just that at this moment I don't have that, but once this PhD is finished (hopefully by the end of September) I can really start looking for work, and even try to pick up some part time work in the meantime and I am sure I can manage to get a spare £30 sometime over the next 4 months! lol.
User avatar
schweinhund227
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2627
Joined: Fri May 24, 2013 9:51 pm
Location: Ontario,Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by schweinhund227 »

Get that PhD out of the way... will be here !

and that Bird is going to be a sweet addition to this GB
no rush my friend !

:hi:
User avatar
PhildaFish
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1087
Joined: Wed May 29, 2013 7:08 pm
Location: Somerset, England
Contact:
Great Britain

Re: Subject for next ISM Group Build....

Post by PhildaFish »

Ooh! What will your PhD be in?
Please visit my website
Image
For instructions, historical paint charts & paint conversion charts.
Please like Scale World's Facebook page.
My Facebook page.
User avatar
Coen
General
General
Posts: 10136
Joined: Wed May 29, 2013 2:04 am
Location: Nova Scotia, Canada
Contact:
Canada

Re: Subject for next ISM Group Build....

Post by Coen »

Jennifer Lopez
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Subject for next ISM Group Build....

Post by Paul »

Tartan skirts
User avatar
Gav0909
Chief Warrant Officer 5
Chief Warrant Officer 5
Posts: 2927
Joined: Tue May 28, 2013 11:56 am
Location: Fife, Scotland
Contact:

Re: Subject for next ISM Group Build....

Post by Gav0909 »

Haha, Phil I am studying marine biogeochemistry. Google it, will prob explain it easier than I could lol.
User avatar
Emilliano
Sergeant
Sergeant
Posts: 109
Joined: Wed Jun 12, 2013 12:39 pm
Location: Mumbai, India

Re: Subject for next ISM Group Build....

Post by Emilliano »

Coen wrote:The more the merrier Emilliano,
Hi Coen,

I have a quick question...the Vampire i was referring to is the one depicted below...

Image

Blinded by my over Enthusiastic nature :bash: of wanting to participate in an ISM GB, it was only yesterday that I was going through the thread and comments from other fellow modellers as well a what Lee mentioned in the guidelines(and found out that only subjects belonging to NATO countries and the Warsaw pact are to be modelled...because of the same i educated myself in learning that New Zealand is a (MNNA) Major non-NATO ally and not a NATO country..Now based on what i have and as we all know a starter kit has only one scheme and in my case its for the Royal New Zealand Air force and the decals are of the same.Nevertheless i will ask my question... May i participate in the GB using the said kit and its decals?.

I really want to participate in this GB and i just got this kit and wanted to utilize it over here(rest of my 3 kits are WW2 aircraft)even had something creative in mind for this build...Is there anything i can do besides ordering for a set of decals?.Please help

Thanks,

Emilliano
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Subject for next ISM Group Build....

Post by Paul »

Emilliano I think the only option would be new decals mate
User avatar
Emilliano
Sergeant
Sergeant
Posts: 109
Joined: Wed Jun 12, 2013 12:39 pm
Location: Mumbai, India

Re: Subject for next ISM Group Build....

Post by Emilliano »

Paul wrote:Emilliano I think the only option would be new decals mate
Paul Could you please help me with a site where i may order them as we don't get them in India. Besides this are they expensive as i will just be ordering one sheet of them please advise and sorry for the trouble.

regards,

Emilliano
User avatar
Paul
Site Admin
Site Admin
Posts: 12622
Joined: Thu May 23, 2013 4:47 pm
Location: Merseyside, England, UK
Contact:
England

Re: Subject for next ISM Group Build....

Post by Paul »

Emilliano wrote:
Paul wrote:Emilliano I think the only option would be new decals mate
Paul Could you please help me with a site where i may order them as we don't get them in India. Besides this are they expensive as i will just be ordering one sheet of them please advise and sorry for the trouble.

regards,

Emilliano
Hannants is probably your best bet. :th: http://www.hannants.co.uk/
User avatar
chief5437
Major
Major
Posts: 4810
Joined: Fri May 31, 2013 1:25 pm
Location: England
England

Re: Subject for next ISM Group Build....

Post by chief5437 »

Just paint over the red kiwi to make it round, hey presto, an RAF vampire! Or you could say it was on exchange and based at a RAF station?
Chief
User avatar
Emilliano
Sergeant
Sergeant
Posts: 109
Joined: Wed Jun 12, 2013 12:39 pm
Location: Mumbai, India

Re: Subject for next ISM Group Build....

Post by Emilliano »

Paul wrote:
Emilliano wrote:
Paul wrote:Emilliano I think the only option would be new decals mate
Paul Could you please help me with a site where i may order them as we don't get them in India. Besides this are they expensive as i will just be ordering one sheet of them please advise and sorry for the trouble.

regards,

Emilliano
Hannants is probably your best bet. :th: http://www.hannants.co.uk/
Thank you Paul :th: for the link however when i tried, it showed no result after filling in the details for the same maybe there is no stock or something..I am determined to get this build done...like Alex says "Adapt and Overcome" even if i have to get the same painted :wall: will do it :)
Post Reply

Return to “Modelling Chat”