Ferrari F40 Fujimi 1/16 Scale

Post by **Twokidsnosleep** » Mon Jan 30, 2017 6:42 pm

No worries, I like the suggestions
I have all kinds of leather stitching tools (somewhere) including diamond stitching punches in a few sizes.
Those make the holes in the leather first nice and even and then you saddle stitch through them
Have to be the right distance apart for scale or looks weird...like the tape does

Post by **Thojim** » Sat Feb 04, 2017 9:54 pm

I have the same f40 1/16 fujimi kit. Its misdi g a lot of parts but I painted it black on black. Building it just like the f40 the gas monkey garage guys did. I'm misdi g the wheels and tires, the rear bottom valence, seats, all the glass and the hole tree letter A and front spindles , the front tortion bar. But man does it look awsome black. I did a 1/24 scale the same way.

Post by **Thojim** » Sat Feb 04, 2017 9:55 pm

Problem is, I can't find any parts online any were for it

Post by **Twokidsnosleep** » Sat Feb 04, 2017 10:47 pm

Thojim wrote: Sat Feb 04, 2017 9:55 pm Problem is, I can't find any parts online any were for it

I had given some sources and suggestions on your post about this...go have a look
I would buy another kit and try to duplicate parts. For wheels you should be able to find aftermarket especially from Radio Controlled( RC) sources
Good luck

Post by **Thojim** » Sat Feb 04, 2017 10:53 pm

Yeah, that's what I think I'm gunna have to do, buy a hole mother complete kit. And with the rest, I wander what a fararri f40 rat rod would look like....hehe

Post by **Thojim** » Sat Feb 04, 2017 11:01 pm

Thanks for the sites to look at.....

Post by **Twokidsnosleep** » Sun Feb 05, 2017 12:13 am

Thojim wrote: Sat Feb 04, 2017 11:01 pm Thanks for the sites to look at.....

Hey now worries
It is quite a pickle when you have an incomplete kit
Be careful when you look at the aftermarket replacement stuff..most is 1/24 or 1/20 scale

Post by **Fridgy** » Sun Feb 05, 2017 12:23 am

Ahh how did I miss this build??
You always got one step further with your builds scott.
I mean stiching on floormats? Jebus mate... you need to get a hobby.... oh wait

Post by **Thojim** » Sun Feb 05, 2017 12:26 am

I was trying to submit pics of a couple of my models but it tells me the image is to large.

Post by **RossiM1** » Wed Feb 08, 2017 5:04 pm

Looking awesome Scott love that large scale don't see many kits in this scale not readily available over hear mainly 24th 20th and 12th stuff, was it difficult finding the after market stuff?
ATB

Post by **Twokidsnosleep** » Wed Feb 08, 2017 5:07 pm

RossiM1 wrote: Wed Feb 08, 2017 5:04 pm Looking awesome Scott love that large scale don't see many kits in this scale not readily available over hear mainly 24th 20th and 12th stuff, was it difficult finding the after market stuff?
ATB

YA it is fun at this scale
My car mojo is low as I seem to have a fighter jet thing going on for some reason
Cannot find some equipment I need for the floor mats and it has sucked the life out of my energy for the kit
It will come back

Post by **RossiM1** » Wed Feb 08, 2017 5:17 pm

Hi Scott just a thought on the carpet issue have thought about trying material that is used in dolls houses, our local Hobbycraft store has like a mini haberdashery section with loads of different materials otherwise what about flocking powder? just a thought

Post by **Twokidsnosleep** » Sun Feb 12, 2017 4:16 pm

The kit box almost made it back into the stash closet again, but
Ha ha, found my Leatherworking tools late last night....basically right in front of my nose in the box they were supposed to be in while looking for something else

So can try the stitching again for the mats....doesn't take much to pull one's mojo off a build

Post by **Lysus** » Sun Feb 12, 2017 4:38 pm

So true. Lately I've been on the 10 minute plan: do it for 10 minutes and either I'll get into it or I won't. Either way some work got done.

Post by **Timplastic** » Fri Feb 24, 2017 6:59 pm

Get her finished she deserves it

Post by **Twokidsnosleep** » Wed Jul 19, 2017 3:36 am

Just bringing this forward so I can re pop the photos...hard to find them all!

Post by **Modelfreek** » Wed Jul 19, 2017 3:49 am

Yep, I'd like to see this one too. Seem like a lot of Ferrari
Love at the moment and well deserved lol.

Post by **RossiM1** » Wed Jul 19, 2017 10:10 pm

Great to see this being resurrected Scott

Post by **Johnj** » Thu Jul 20, 2017 12:15 am

Yeah, i would like to see you finish the build as well scott. It's a bit of a strange scale

Post by **Twokidsnosleep** » Thu Jul 20, 2017 12:52 am

Thanks guys. All right, I will try and put her back in the building stream...maybe after summer????
We shall see

Post by **zahra1234** » Mon Aug 28, 2017 5:16 am

nice sharing

Post by **Rallychef** » Mon Aug 28, 2017 11:25 pm

Looking good Scott, just starting to catch up with the other builds on here after my modelling break. Keep up the god work

Cheers Ian D

Post by **Lysus** » Tue Aug 29, 2017 6:28 pm

It lives!

Post by **Twokidsnosleep** » Tue Aug 29, 2017 7:41 pm

In a box, in multiple pieces not yet painted or glued together

Post by **Twokidsnosleep** » Thu Apr 16, 2020 8:38 pm

Ok holy blast from the past Batman
Look what is back on my desk!
I re-read the entire thread and am going to take this a slightly different direction
My skills are not the same, I have just done a 1/16 Ferrari in black so how about clear blue over silver

Not a replica of that car, mine still will be black inside and no ugly nose or wing mods
So here we are, starting with focus to finish the interior.

Post by **Gary30** » Thu Apr 16, 2020 9:20 pm

I’ll race you to the finish with my baby one

Post by **Twokidsnosleep** » Thu Apr 16, 2020 11:28 pm

Gary30 wrote: Thu Apr 16, 2020 9:20 pm I’ll race you to the finish with my baby one

Well I got nothing else to do, sure

Post by **Twokidsnosleep** » Fri Apr 17, 2020 2:38 am

I re-read the entire thread and this time got caught up in the loss of all the old friends who used to post on ISM
There are more guys gone than new faces joining, by far
It is really sad actually and I really do miss interacting with those guys, maybe one day they will return. Ahem @Lysus
But I have some new and even closer friends here now so I guess it all evens out

Anyhow, had a good day and got one seat carbon fibre’d
I honestly really like doing this stuff and love the decals from Scale motor sports
The 1/12 scale looks fine here not too big and not too small. I usually stick exactly on the same scale, but troubled times....

And on the seat with some rough stick it note paper used as a form

This is going to Mr Danno...(when I figure out my postal system) as this is no longer a Gas Monkey F40

Post by **Hawkmoon** » Fri Apr 17, 2020 7:46 am

Looks good and I agree the car looks so much better without the mods

Post by **Twokidsnosleep** » Fri Apr 17, 2020 7:09 pm

Couldn’t wait to get upstairs this morning and finish the carbon fibre on the seats and side rails

Then the steering wheel done and now just the seats to glue in

She is moving along

Post by **Gary30** » Fri Apr 17, 2020 7:59 pm

Starting to think you might win this race haha! I better pull my finger out, I’m hitting the bench over the weekend, so it’s all good.

PS interior looks AMAZING

Post by **digger303** » Sat Apr 18, 2020 12:41 am

Gary30 wrote: Fri Apr 17, 2020 7:59 pm Starting to think you might win this race haha! I better pull my finger out, I’m hitting the bench over the weekend, so it’s all good.

PS interior looks AMAZING

It has the hallmarks of a excellent build....

Post by **Stokesy44** » Sat Apr 18, 2020 12:43 am

Love the last picture. That interior is a beaut.

Post by **Twokidsnosleep** » Wed Apr 22, 2020 5:12 am

Thanks for the comments guys, got some more done on the F40
Wheels
I was trying out some gun metal paint, it looked ok, but flakes off easily to the touch

So into the glass bath for a stripping

I got them all stripped and painted gloss black, added some brass for the tire valves as well

Then started in on the brake rotors

Drilled out all the holes....and then found out after I drilled them all that the front and back moulded hole dips don’t match up to both sides

So I had to putty one side, smooth it all off and re-drill them.
Then they got painted bright gold. Get some photos up here soon, didn’t seem to take the finals of those

Post by **Twokidsnosleep** » Wed Apr 22, 2020 5:38 am

So then next the rear shocks
The stock kit versions are, well, shocking. Poor detail and minimal coil. Off that pathetic moulding comes.
Then I tested a wire wrapping, seen here with the kit shock

Then I re did the coil.
I also indexed the left and right sides with a pin so I could tell them apart and get them into position

I have to even out the wire a bit still and paint the inner shock portion a contrast colour, but headed in the right direction

Post by **Twokidsnosleep** » Wed Apr 22, 2020 3:17 pm

Here we go wheel finals...it is Alclad gloss black
I added brass tube fitted in rod to act as a valve stem...didn’t take any WIP pics of that
Gold Tamiya TS spray decanted for the brake disks

Have taken to putting these sub assemblies in bags to avoid dust and me breaking something or rubbing paint off

Hoping this keeps each sub assembly a bit cleaner and crisper

Post by **Hawkmoon** » Wed Apr 22, 2020 5:42 pm

All looking good and nice work Scott

Post by **Twokidsnosleep** » Wed Apr 22, 2020 7:06 pm

Hawkmoon wrote: Wed Apr 22, 2020 5:42 pm All looking good and nice work Scott

Cheers Hawk

Hope all is well with you

Post by **Twokidsnosleep** » Sat Apr 25, 2020 5:49 pm

A rainy Saturday morning here on the West Coast of Canada.
I have Baileys in my coffee and waffles are on the make, so good time to post up yesterday’s work I did while watching the live show

Body seams and filling...yep scraping, sanding and filling started, wooohooexciting

I attatched the rear wing to find a pretty darn big seam. The references show the wing is perfectly integrated, so some putty and sanding work to do

Then I did the carbon fiber on the door cards. I got a few more creases than usual, I thought this was going to be easy. But internal door, dark interior, I can accept those.

So then some pics of the mostly finished rear clip

And some shots of the components together for the live show

Bonus pic: the cat is very concerned about corona virus. Woke up to this snuggled between my legs yesterday....

Post by **Twokidsnosleep** » Mon Apr 27, 2020 1:55 pm

Door card progress.

The real cars have a wire for a door pull to save weight and no electric windows

Will have to make a window crank...remember those???

Post by **Gary30** » Mon Apr 27, 2020 9:38 pm

This all looks very familiar

Looking great Scott

I’ll be done before you though

Post by **Twokidsnosleep** » Tue Apr 28, 2020 12:32 am

Gary30 wrote: Mon Apr 27, 2020 9:38 pm This all looks very familiar

Looking great Scott

I’ll be done before you though

You most certainly will

Post by **Hawkmoon** » Tue Apr 28, 2020 9:08 am

All looking good and very nice work

Post by **Twokidsnosleep** » Fri May 08, 2020 2:13 am

Ok this is still haunting my desk.
Just messing with some changes to the lines in the rear clip. Not sure why Fujimi has a line running from the top of one rear shock tower across the transmission and to the other shock tower....I find no such a line on any photo reference I have seen. So I altered it.

Now I have done a spoon test for body colour. We are going clear blue over silver.
So I did two silver aluminums and one chrome spoon

I am gonna let you guess which spoon colour won in my mind and yes it is the one with the most work and risk involved

Post by **Hawkmoon** » Fri May 08, 2020 6:46 am

All looking good and nice work Scott

Post by **Homerlovesbeer** » Fri May 08, 2020 8:07 am

Looking SweeeeTTT

Post by **Gary30** » Sat May 09, 2020 7:44 am

The spoon on the left please!!!

Ok so I may have crossed the finish line with mine first but your colour choice is WAY more adventurous than mine and I’ll be watching until you get this bad boy completed, that paint finish is going to be crazy good!

Post by **Twokidsnosleep** » Mon May 11, 2020 1:18 am

Ok body paint moving forward here
Ultimate primer white

Black base Alclad down before we shoot chrome

I was gonna make it black originally, but did that with the 288 GTO
Letting the black set up and then go Alclad chrome

Post by **Twokidsnosleep** » Mon May 11, 2020 2:27 am

Had to get some internal shots as I go along and assemble as most of this gets covered and hidden as the body work is added
Lots of mods at the top of the shock tower with added metal ring, gold bolts and the blue anodized bolt

Front and rear coils were changed from chunky plastic shocks to painted brass shock and chrome wire wrapping.
Could have got the wire more consistent, but it is tough; either too closed up or too open and uneven

Slowly getting the internals finished up and glued together. The rear window to cement in after it finishes with it’s dip in Future
Chrome on possibly tomorrow depending on my time, the weather and how the black sets up tonight

Post by **Hawkmoon** » Mon May 11, 2020 7:42 am

She's certainly starting to look the parts Scott. Very nice work and looking good