Airfix 1/48 Jaguar GR1

Steve64
Staff Sergeant
Staff Sergeant
Posts: 190
Joined: Wed May 27, 2015 10:14 am
Location: An Englishman abroad
Great Britain

Airfix 1/48 Jaguar GR1

Post by Steve64 »

Hello fellow model makers,

This is what may eventually be one of many builds of Airfix’s new Jaguar. I was tempted by the reviews, and decided to put my current build aside to take on the Jag’. I now have a new kit and a creaking shelf of doom.

I won’t repeat what others have already said in praise of the kit, but I will add that the crispness of the moulding and finesse of the details is as good as Eduard in my opinion. I was also struck by how tiny it seems. I was last working on a 1/20th Machinen Krieger, so I guess that’s why. The parts are faithfully reproduced in scale I’m sure, but I’m going to have to adjust.

Sadly, my kit came with a couple of defects. There’s mild scratching on the canopy even though it was packed in its own plastic bag. There’s also a broken antenna and a short-shot and damage on one of the undercarriage parts, plus heavy flash around the delicate pitot tubes.

The problems look repairable with a little scratch building and care. It is a shame that they are there at all, because faults like these reinforce the impression that Airfix’s quality control is not as good as other manufacturers. I guess it is like buying a new car to find there’s a coffee stain on seat or getting that great new laptop to discover the shift key is stuck. It instantly diminishes the pleasure of ownership. This is my first Airfix kit since childhood, and I stayed away because of problems like these. Overall though, I must say it’s a beauty, and I’m excited to make a start.

One of the first things to do is decide on the variant. I’m going for ‘XZ101’ which I believe was the first single seater delivered to No II (AC) Squadron, RAF Germany in 1976. It has the wrap around grey and green camo which seems like the archetypal 1970s RAF look. I’ll be fitting it out as a recon variant, which I also believe was the squadron’s main mission. If you know better, please post corrections.

OK, enough background, next a couple of pics and then - in the next post- some modelling :-)

Image

Image
User avatar
DRUMS01
Chief Warrant Officer 4
Chief Warrant Officer 4
Posts: 2352
Joined: Wed Jun 08, 2016 1:48 am
Location: Ohio, USA
United States of America

Re: Airfix 1/48 Jaguar GR1

Post by DRUMS01 »

Always thought this was a good looking aircraft.

Looking forward in seeing what you do with it.

Ben
On the table or recently completed:

1/18 AV8-B Harrier - WIP
1/35 Churchill AVRE with SBG Bridge Diorama - DONE
75mm BMW R75 WW2 motorcycle with rider - DONE
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: Airfix 1/48 Jaguar GR1

Post by RangerNeil »

Chair pulled up, popcorn at the ready!!!
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hello gents,

    It's great to have you looking in. Apologies in advance if my progress is slow, but progress there will be :-)

    See you soon.
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    :pop: :pop: :pop:
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Construction starts with the fuselage. Wait. What? Not the cockpit? Well, not in my case. I've seen a review showing a potential fit issue between the forward and rear fuselage parts, so I want to check this before adding interior detail. On my kit there were some rough ejector pin marks interfering with the alignment. With them sanded down the fit looks good, leaving me to go back to the instructions, which start with the cockpit. By the way, there are a few parts with big ejector pin marks but Airfix points these out, and there are no Tamiya style dents spoiling detail parts.

    Image

    Image

    There's not much to say about the pilot's office. The fit is good and the detail great. Only one problem presented itself; a gap between the upper back rest and main seat. It will be awkward to fill and sand without loosing detail. My plan is remove the detail and scratch my own part to get a smooth finish. I'm going to add a few extra features anyway. More of that soon. For now, here is the basic construction.

    Image

    Image

    Image

    Image
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    I'm really impressed with the cockpit detail. The side panels and IP look really nice and the bang seat looks tidy. A harness would be great but other than that, well done Airfix.
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hello folks,

    I have to say this is a very satisfying build. The fit is exceptional and Airfix's parts are wonderfully detailed. Even so, there are some great reference photos out there that tempted me into adding detail. I started with a scratch built harness (There it is Stokesy :-)). While I had the magnifying lenses on, I also made the rods at the back of the cockpit that seem to be part of the canopy opening mechanism. Adding the suggestion of detail on top of the seat finished off the fiddly bits. These days I only work with plastic so all the extras are built from rod, strips or stretched sprue. I couldn't get the same level of finesse that Airfix offers but I reckon my additions will look the part once painted. We'll see soon.

    This is how it turned out.

    Image

    Image

    Happy modelling!
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    Superb work. A scratch built harness on a bang seat!! It looks great, along with all the other detail too. :clap: :clap: :clap:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    tommy
    Private First Class
    Private First Class
    Posts: 49
    Joined: Fri Jun 28, 2013 9:36 pm
    Belgium

    Re: Airfix 1/48 Jaguar GR1

    Post by tommy »

    wow, amazing work! the scratch build details are super.
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hi Tommy,

    Thanks very much, and as a reminder of the obsessive nature of my scratch building, especially in 1/48, here's a shot of the cockpit with a pair of specs as reference. I enjoy it anyway. :crazy:

    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hi fellow detail obsessives :-)

    It's time for paint. I spent a little time colour modulating the parts. These shots are taken under harsh artificially light which seems to camouflage the result. Next will be brush painting and weathering - probably in oils - although I may pick out some parts in acrylic first.

    Image

    Image

    My homemade zinc chromate yellow or pale yellow as Airfix describe it.

    Image

    Image

    By the way, I really don't like clear coating but I like how it helps a wash to flow. So, to get that smooth shiny finish I always add gloss varnish to the paint mix. You can see it prominently on the ejection seat. The other parts have a satin/gloss reflectivity.

    Still really enjoying this kit.

    See you soon for more. :cheers2:
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    Nice paintwork. I've never thought of adding a bit of gloss to the base color to help the application of a wash :clap:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    Interesting tip which I thank you for.
    How much varnish do you add to the paint ?
    Lovely finish on those internal parts.
    :th: :th: :th:
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hi Digger and Stokesy,

    Ha, you have found my weak point. I don't really measure anything very much. But thinking about it, I reckon my recipe (using Tamiya paints), is about fifty per cent thinner (Mr Hobby Levelling Thinner) with thirty per cent paint and twenty per cent clear gloss. That gives me a thin, almost watery, paint mix that I apply in several coats. I think there's more gloss in the dark grey mix I used for the seat just because I mixed up a tiny amount of paint and went a bit heavy with the ratio.

    It can all look a bit too shiny at first but after weathering the shine fades. You can always matt coat as a final stage too.

    I reckon this process gives a good smooth finish every time and creates a good surface for washes and decals. You just have to be careful not to go too heavy with the first coat to avoid runs or spidering.

    If you think it's worth a try I'd be interested in how you get on.

    Happy modelling gents.
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    Steve64 wrote: Wed Apr 30, 2025 7:44 am Hi Digger and Stokesy,

    Ha, you have found my weak point. I don't really measure anything very much. But thinking about it, I reckon my recipe (using Tamiya paints), is about fifty per cent thinner (Mr Hobby Levelling Thinner) with thirty per cent paint and twenty per cent clear gloss. That gives me a thin, almost watery, paint mix that I apply in several coats. I think there's more gloss in the dark grey mix I used for the seat just because I mixed up a tiny amount of paint and went a bit heavy with the ratio.

    It can all look a bit too shiny at first but after weathering the shine fades. You can always matt coat as a final stage too.

    I reckon this process gives a good smooth finish every time and creates a good surface for washes and decals. You just have to be careful not to go too heavy with the first coat to avoid runs or spidering.

    If you think it's worth a try I'd be interested in how you get on.

    Happy modelling gents.
    Hey, you cant argue with the results! :th:

    I don't measure anything either. I use thinner to get the paint to resemble a milky consistency and I mix colors by eye :lol:

    I've never used gloss during the paint phase for aircraft interiors but I can certainly see why it could be used. I guess it would generate that extra bit of definition between clean and dirty. I have an aircraft coming up soon in the build diary (my way of saying I've done too many tanks recently) so I reckon I'll give it a go.

    That's one of the reasons I like the forum so much. Its fun AND a learning space :th:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    cor
    Warrant Officer
    Warrant Officer
    Posts: 1532
    Joined: Sun May 23, 2021 10:34 am
    Location: Sydney, Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by cor »

    I wonder who does measure these things..
    Your plane is building up nicely. Gonna be great when its done.
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    Steve64 wrote: Wed Apr 30, 2025 7:44 am Hi Digger and Stokesy,

    Ha, you have found my weak point. I don't really measure anything very much. But thinking about it, I reckon my recipe (using Tamiya paints), is about fifty per cent thinner (Mr Hobby Levelling Thinner) with thirty per cent paint and twenty per cent clear gloss. That gives me a thin, almost watery, paint mix that I apply in several coats. I think there's more gloss in the dark grey mix I used for the seat just because I mixed up a tiny amount of paint and went a bit heavy with the ratio.

    It can all look a bit too shiny at first but after weathering the shine fades. You can always matt coat as a final stage too.

    I reckon this process gives a good smooth finish every time and creates a good surface for washes and decals. You just have to be careful not to go too heavy with the first coat to avoid runs or spidering.

    If you think it's worth a try I'd be interested in how you get on.

    Happy modelling gents.
    That's good enough for me...thank you
    I don't measure anything any more either, but I do have a rough guess at the portions I want then eyeball it.
    Like Stokesy I'm keen to give it ago and also like him I'll switch over to a aircraft once I've built one more tank or land vehicle after the current builds. Possibly a rather common cheap revel spitfire.

    :cheers2:


    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hey Guys,

    I couldn't agree more. It's great to share and learn here. I bounce around between air, armour and sci-fi, and I enjoy them all. And: talking of sharing, take a look at this. I jumped ahead to build the underwing tanks and they went together almost perfectly. No filler required at all. In the pic below the forward section is sanded and polished and I'm working on the rear. The seam line runs right down the middle, but it has vanished after a little careful sanding. Maybe I build the wrong kits, but this is a first for me.

    Image

    Happy modelling guys :cheers2:
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    Steve64 wrote: Wed Apr 30, 2025 9:18 pm Hey Guys,

    I couldn't agree more. It's great to share and learn here. I bounce around between air, armour and sci-fi, and I enjoy them all. And: talking of sharing, take a look at this. I jumped ahead to build the underwing tanks and they went together almost perfectly. No filler required at all. In the pic below the forward section is sanded and polished and I'm working on the rear. The seam line runs right down the middle, but it has vanished after a little careful sanding. Maybe I build the wrong kits, but this is a first for me.

    Image

    Happy modelling guys :cheers2:
    Rippley's believe it or not :lol: , but yes it does happen at times.
    A little extra glue to can help to melt 2 parts together that almost match and then that seam will also disappear.
    :th: :th: :th:
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Elve1984
    Sergeant First Class
    Sergeant First Class
    Posts: 268
    Joined: Mon Nov 03, 2014 11:33 am
    Contact:
    Netherlands

    Re: Airfix 1/48 Jaguar GR1

    Post by Elve1984 »

    Great work, Steve! I love the detail you added to the cockpit. I hope Airfix is gonna bring this one out in 1/72 scale aswell.
    My modeling website: ElveScaleModeling
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Hi guys,

    Well, I'm back to working on the cockpit and also the landing gear bays. There's not much to say about construction except that it continues to be, er... seamless :-)

    I'm using my usual technique for the detail painting, which is blocking in the main colours in acrylic, highlighting some raised areas and then weathering and adding depth with oils. The shots below show the acrylic phase mostly done. I enjoy the process and the result this approach delivers in 1/32 but I'm never quite sure if it's right for the smaller volumes of 1/48. One day I'm going to crack a technique that I really like, but for now this is it.

    I have to say the quality of the kit is making me a bit precious about neatness. I'm not so worried about exact colour matching but smooth accurate application of paint is what I'm after, with a bit of pre-weathering from highly diluted paint. While I was adding colour, I also applied the instrument panel decals. Frankly, I wonder if they are too gaudy so I might tone them down with a grey filter. Oh, and you may notice that the right side is slightly out of alignment, which I only just saw as I enlarged the photos. Damn. The IP is buried in the cockpit so I think I'll try and control the urge to correct anything.

    Here's all that in pictures.

    Happy modelling chaps!

    Image

    Image

    Image

    Image

    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Elve1984 wrote: Thu May 01, 2025 10:00 am Great work, Steve! I love the detail you added to the cockpit. I hope Airfix is gonna bring this one out in 1/72 scale aswell.
    Hey Elve,

    Thanks very much. I hope you get your wish for a 1/72 version. My fantasy is a 1/24th scale up! I'd sell most of my stash to raise the funds to buy it.

    Let's hop the Airfix fairy is listening :D

    :cheers2:
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    I meant hope, but we could hop too. Maybe the Airfix fairy responds to hopping.
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    Beautiful paint job. That bang seat looks superb. :clap: :clap:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    Awesome details and detail painting.
    :clap: :clap: :clap:
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    Steve64
    Staff Sergeant
    Staff Sergeant
    Posts: 190
    Joined: Wed May 27, 2015 10:14 am
    Location: An Englishman abroad
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Steve64 »

    Thanks gents,

    This kit inspires me to do my best. Although, that doesn't always mean things turn out. I had a big fail with my oil paints. They just refused to dry. Normally it takes 24 to 48 hours with the brands I use, but nope, not this time. They just stayed wet. Luckily, that meant I could remove them and start again, which I did. Second time I was lucky using the same paint and techniques. How mysterious. Anyhow, the weathering and highlighting in the cockpit is done. I've also added a little scratch built detail to suggest the canopy locking mechanism and seal. Next I'll weather up the front wheel well and I can go back to construction.

    By the way, I decided not to use the decal supplied for the radar screen. Compared to my reference pictures it looked too green, so I painted the area instead. I'll be showing the aircraft on the ground with power off so this seemed like the best approach. Not that it will be seen very much :-)

    Here is the progress in pictures.

    Image

    Image

    Image

    Happy modelling chaps.
    User avatar
    Stokesy44
    Lieutenant General
    Lieutenant General
    Posts: 9093
    Joined: Thu Jun 18, 2015 10:13 am
    Location: The Midlands, UK
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by Stokesy44 »

    That's a nice looking cockpit :clap: :clap:
    Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
    User avatar
    digger303
    General
    General
    Posts: 16667
    Joined: Mon Mar 16, 2015 10:01 am
    Location: Western Australia
    Australia

    Re: Airfix 1/48 Jaguar GR1

    Post by digger303 »

    Excellent cockpit finish, absolutely beautiful work.

    VMS offers "Oil Expert" enhancing mediums that can shorten oil paint drying times.

    :clap: :clap: :clap:
    :cheers2:
    Listen and appear wise
    Image
    Image

    scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
    Image
    User avatar
    RangerNeil
    Major
    Major
    Posts: 4745
    Joined: Fri Jul 12, 2019 9:42 pm
    Location: Dagenham
    Contact:
    Great Britain

    Re: Airfix 1/48 Jaguar GR1

    Post by RangerNeil »

    Steve64 wrote: Tue May 06, 2025 12:06 pm
    Elve1984 wrote: Thu May 01, 2025 10:00 am Great work, Steve! I love the detail you added to the cockpit. I hope Airfix is gonna bring this one out in 1/72 scale aswell.
    Hey Elve,

    Thanks very much. I hope you get your wish for a 1/72 version. My fantasy is a 1/24th scale up! I'd sell most of my stash to raise the funds to buy it.

    Let's hop the Airfix fairy is listening :D

    :cheers2:
    Maybe you'll get lucky and JetMads will produce a 1/32 version?? They've done the Viggen & are in the process of doing the Draaken so I'm a happy bunny. Won't hurt to ask if its on their " To do" list......
      Neil (yet another one...)

      On the board now:

      Airfix 1/35 Alvis Stalwart Mk2 FV622
      Hasegawa 1/48 A8 Crusader

      Scalemates stash info
      =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Hi guys,

      Thanks very much for all the encouraging comments.

      I hadn't thought of looking at VMS products but it sounds like the quick drying product for oils is something I'd appreciate. Thanks for the tip!

      I have a basic painting methodology that I usually stick to now, and try and improve on each time I use it. It's a systematic approach that usually gets me a decent result:

      1. Airbrush the basic colour in satin or gloss lacquer, adding some colour modulation if the part is big enough.
      2. Block in additional colours, using thinned acrylics.
      3. Highlight and weather in oils, sparingly

      If you follow the 'moderation in all things' rule, this process usually gets an eye catching result.

      If I have a self-criticism it is that colours can look over saturated. For that reason I tend to keep it for areas that are in recesses like the undercarriage bays and cockpit where there is less light.

      Happy modelling chaps.
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      RangerNeil wrote: Sun May 11, 2025 12:44 am
      Steve64 wrote: Tue May 06, 2025 12:06 pm
      Elve1984 wrote: Thu May 01, 2025 10:00 am Great work, Steve! I love the detail you added to the cockpit. I hope Airfix is gonna bring this one out in 1/72 scale aswell.
      Hey Elve,

      Thanks very much. I hope you get your wish for a 1/72 version. My fantasy is a 1/24th scale up! I'd sell most of my stash to raise the funds to buy it.

      Let's hop the Airfix fairy is listening :D

      :cheers2:
      Maybe you'll get lucky and JetMads will produce a 1/32 version?? They've done the Viggen & are in the process of doing the Draaken so I'm a happy bunny. Won't hurt to ask if its on their " To do" list......
      Now, that would make my day! Thanks million. Those guys seem to be at the top of the game.
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Well now, I've been feeling a bit self-satisfied with my progress to date. Clearly the universe can't have that. As I started assembly of the main landing gear bays I realised that there were areas inside the fuselage that need painting. And the rear part of one panel which I had painted also needs filling and painting on the other side. So now I have to mix up another batch of my home brew yellow chromate. I didn't measure the ratios in the first place of course. This is what my grandad would describe as 'two steps forward and one step back'. In the meantime here's a sneak preview of how the bays will look.

      First the forward landing gear bay glued in place:

      Image

      You'll notice the dirty great clamp. That's there because the underside of the forward fuselage needs some persuading to join up, unlike the top which matches perfectly.

      Image

      Here are the wheel well components weathered and ready to be assembled

      Image

      When glued in place they will look like this

      Image

      But first I have to paint the interior parts I missed, and this area. You can see the clean up and filling needed too:

      Image

      That's all for now. I hope this thread is interesting and/or inspiring you in some way.

      More soon :-)
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Airfix 1/48 Jaguar GR1

      Post by digger303 »

      Always interesting and inspiring to see the perfect paint application.
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Stokesy44 »

      digger303 wrote: Mon May 12, 2025 11:35 pm Always interesting and inspiring to see the perfect paint application.
      :th: :th: :th:
      :cheers2:
      Yep, its beautifully subtle but still visible and distinct. I remember making the Airfix kit of this from 40 years ago. IIRC, there didn't seem to be as much detail! :lol:
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      User avatar
      SteelScooter
      Master Sergeant
      Master Sergeant
      Posts: 386
      Joined: Tue Jun 17, 2014 8:43 am
      Location: Buckinghamshire, UK
      England

      Re: Airfix 1/48 Jaguar GR1

      Post by SteelScooter »

      Lovely stuff. The favourite jet of my childhood. The footage of one landing on a the M55 with the giant eagle like undercarriage hanging down was awe inspiring. Then being reloaded with bombs and rockets so it can go and kill more Russian armoured columns. It made me feel better even if it was just propaganda. Having said that February 2022 shows we may have had a chance. :think:
      Before you criticize a man, walk a mile in his shoes. That way you'll be a mile away and he'll be shoeless.

      Scalemates: http://www.scalemates.com/profiles/mate ... 08&p=stash
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Stokesy44 »

      SteelScooter wrote: Tue May 13, 2025 4:40 pm Lovely stuff. The favourite jet of my childhood. The footage of one landing on a the M55 with the giant eagle like undercarriage hanging down was awe inspiring. Then being reloaded with bombs and rockets so it can go and kill more Russian armoured columns. It made me feel better even if it was just propaganda. Having said that February 2022 shows we may have had a chance. :think:
      What might have happened......

      After it all kicked off and the Red Army streamed across the northern plains of Germany, 2 Russian tank generals met up in Paris 2 weeks later for a glass of wine. They talked for an hour before one of them said, 'Oh, by the way, who won the air war?'

      Amusing exert from Clancy's Red Storm Rising where the Bear initiates a conventional war in Europe to destroy NATO after a massive terrorist attack on the Soviets oil reserves. The objective, destroy NATO then take the Saudis for the oil. Absolutely superb book.
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Gents, you are very kind. I must admit that I have a perfectionist side of my character that can drive me to do well but also lead to some self-inflicted fails if I think something has gone too badly wrong. It's good to share with a community of guys that might understand how that applies to tiny pieces of plastic.

      I love the Jag too - it's an iconic British aircraft to me, and Cold War jets are my favourite subject.

      I hope your kits are behaving :-)
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Hi guys,

      I airbrushed the places I missed and returned my attention to the nose section. The top halves mated beautifully as shown earlier but the bottom seam was not, er... seamless. The nose underside is moulded flat so either through a construction error or very slight flexing of the parts as I joined them I was left with a lip and a dent. It has taken a lot of sanding and re-scribing to get something half decent. A coat of primer will tell me if the glue marks and scratching are cosmetic or deep enough to need attention. This is the toughest part of what is otherwise a lovely build.

      The good...

      Image

      ...the bad...

      Image

      ...and the hopefully not ugly once the paint is on

      Image

      Happy modelling guys
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Stokesy44 »

      Great work on the seam lines and clean up. :clap:
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Airfix 1/48 Jaguar GR1

      Post by digger303 »

      Great work on the seam and not losing the detail.
      :th: :th: :th:
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Cheers gents,

      With all the interior parts painted I could get on with bringing the fuselage halves together. At this point I learnt that my painting and weathering would be mostly hidden. Big landing gear doors retract when the Jag' is on the ground hiding most of the wheel well detail. Ah, well it was fun to do and I don't have any worries about poorly finished areas showing. I also realised that the external areas under the airbrakes should be the main body colour not yellow as I painted them, but that will be an easy fix later. Seems like I over compensated for an earlier mistake.

      Here's a look pre glue and before the doors are fitted:

      Image

      The landing gear bays fit beautifully, but even so I strengthen the mating areas a little with sprue goo once they were in place. I did that because there are some chunky areas for the landing gear to push into and I don't want the bays popping lose when I apply pressure later in the build. There's also a lot of paint in there so without sprue goo the bond may not be the strongest. By the way, I could have used super glue but I prefer spruce goo because is less likely to crack later.

      Perhaps it was the now very rigid fuselage parts that made fitting a bit more tricky than my initial test. With all that internal bracing the parts were less flexible. They still fit nicely but need clamping together. At first I thought the problem was the novel interlocking teeth built into interior bulkheads. So, with a little trepidation I snipped them off. That made the parts easier to join but they still wanted to resist meeting by about 1mm, with the underside being the main culprit again. Clamps got the job done, and it took a few of them:

      Image

      Now all that will dry overnight and tomorrow I can see what sanding a re-scribing is need.

      Happy modelling chaps.
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Stokesy44 »

      Ah yes, the modeler's lament. You take all that time to create those wonderful interior pieces then no bloody soul will see them.

      Brings out the old conundrum of why then, if it cant be seen? The way I see it is, if you enjoyed working on those parts then that's great and it matters not whether they can be seen. Is it all about the build or all about the display?

      All things within reason is my approach. I draw the line at things like bomber interiors where SO much is worked on then once you button it up its gone forever. :crazy:
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      Garion77
      Warrant Officer
      Warrant Officer
      Posts: 1386
      Joined: Fri Jul 08, 2016 2:15 pm
      Location: Terrebonne, QC, Canada
      Canada

      Re: Airfix 1/48 Jaguar GR1

      Post by Garion77 »

      I've been watching in silence since the start and amazing job.
      True that the most recent Airfix kits have great detail. I have the Javelin on a shelf for the last 2 years :banana: just need the undercarriage to finish it and thought the detail were great also.
      You're doing really amazing things !
      Francis

      Image


      At the bench
      Tamiya's 1/72 F-16 and 1/48 Skyraider
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Stokesy44 wrote: Sat May 17, 2025 9:03 pm Ah yes, the modeler's lament. You take all that time to create those wonderful interior pieces then no bloody soul will see them.

      Brings out the old conundrum of why then, if it cant be seen? The way I see it is, if you enjoyed working on those parts then that's great and it matters not whether they can be seen. Is it all about the build or all about the display?

      All things within reason is my approach. I draw the line at things like bomber interiors where SO much is worked on then once you button it up its gone forever. :crazy:
      Hi Stokesy,

      Yes I agree. Personally I like to focus my attention on what can be seen, or at least what I think will be visible once everything is buttoned up. If a part can't be seen at all, I rarely give it much attention and may leave it out entirely if it is not structural. I probably would have spent a bit less time on the rear of those main gear bays had I realised earlier that the majority is out of sight. I definitely would have used some darker tones towards the back to emphasise the shadows. Ah, well, as you said I had fun so nothing lost really.
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Garion77 wrote: Sat May 17, 2025 10:57 pm I've been watching in silence since the start and amazing job.
      True that the most recent Airfix kits have great detail. I have the Javelin on a shelf for the last 2 years :banana: just need the undercarriage to finish it and thought the detail were great also.
      You're doing really amazing things !
      Hi Francis,

      Thanks so much, I have to say this kit is really changing my mind about the latest Airfix releases. I'd previously avoided them because - frankly - they always seemed flawed in some way, but this one is a gem so far.

      I hope I can keep up a good standard and end up with something I enjoy looking at as much as I am enjoying the build.

      Thanks for looking in!
      Steve64
      Staff Sergeant
      Staff Sergeant
      Posts: 190
      Joined: Wed May 27, 2015 10:14 am
      Location: An Englishman abroad
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Steve64 »

      Hi guys,

      So here comes the test of how those big fuselage parts really fitted together. First a few shots of the dry seams after gluing and before finishing. I used the glue and squish together technique with some clamping as shown earlier.

      Image

      Image

      Image

      At first I thought the fit was good enough to avoid any filling, but as I worked on the joins with various grades of sandpaper a few sunken areas showed themselves. They are not deep, and the technique I use to find them is simple. First I sand down an area, then I apply glue along the seam to make it shiny. A further light sanding dulls the glue in all but recessed places highlighting what needs filling. Like this:

      Image

      Out came the sprue goo and after more work, I think the job is done. Under a strong light (and in these photos) the joins still looks a little rough but my finger tip tells me that sanded areas are good and in natural light there's no tell-tale lumps or dips. The sprue goo I mixed up seems to stain plastic which sometimes makes it hard to figure out if everything is finished. A coat of grey primer will settle the debate. I have to say that the join between the main and forward fuselage is almost perfect. There's a flush fit and only a hint of a gap near the upper spine.

      Image

      Image

      Image

      The underside seam is still a little rough in places because the big recce pod will cover it. I sanded to the point where fit issues will be avoided and stopped there.

      Image

      Here's how that all looks from a more natural viewing distance.

      Image

      Image

      I'm starting to see a Jag' emerge. Woo-hoo!

      Happy modelling guys

      P.S. I borrowed a technique from a fellow modeller and used a piece of clear sprue just to hint at the target designator (?) behind the nose window. I reckon it will be more than enough detail

      Image
      User avatar
      digger303
      General
      General
      Posts: 16667
      Joined: Mon Mar 16, 2015 10:01 am
      Location: Western Australia
      Australia

      Re: Airfix 1/48 Jaguar GR1

      Post by digger303 »

      :D
      It's coming.
      :cheers2:
      Listen and appear wise
      Image
      Image

      scalemates stash https://www.scalemates.com/profiles/mat ... ION[]=Kits
      Image
      User avatar
      Kevthemodeller
      Lieutenant Colonel
      Lieutenant Colonel
      Posts: 5825
      Joined: Sat Mar 26, 2016 8:31 am
      Location: Newton Abbot UK
      England

      Re: Airfix 1/48 Jaguar GR1

      Post by Kevthemodeller »

      I've got a soft spot for the Jaguar, remember building the old 70s 1/72 kit Airfix did. Mine came out pretty good I thought as a teenager. Your cockpit and inner fuselage work is superb. I am very tempted by this latest offering, will follow this build with interest :pop:
      Last edited by Kevthemodeller on Thu May 22, 2025 9:11 pm, edited 1 time in total.
      Kev

      On the bench:
      Martini Brabham BT44B
      User avatar
      Stokesy44
      Lieutenant General
      Lieutenant General
      Posts: 9093
      Joined: Thu Jun 18, 2015 10:13 am
      Location: The Midlands, UK
      Great Britain

      Re: Airfix 1/48 Jaguar GR1

      Post by Stokesy44 »

      Its been great to see the way you have worked on the seams. To see them disappear like that has been fascinating.

      I am yet to try the whole sprue goo thing but your work has definitely got me thinking about it :th:
      Its been tried and tested, it works! So don't blame the system if you're no good. :doh:
      Post Reply

      Return to “Jet Aircraft”