Global Scale Modeller

OMG Andy beautiful work buddy i really dont know how you manage all those small bit brilliant work.

Nige201980 wrote:OMG Andy beautiful work buddy i really dont know how you manage all those small bit brilliant work.

Thanks Nige, greatly appreciate your too kind comments mate.
To be fair I think I'll need new eyeballs for Christmas after all this.. Haha....
I best go steady as I need these eyes to watch the new movie in a few weeks. Lol.
Thanks again bud, all the best...


More soon guys!....

You are a true inspiration my friend, and I thank you for the help, suggestions and encouragement in my build
Just want to say that now before I forget

Twokidsnosleep wrote:You are a true inspiration my friend, and I thank you for the help, suggestions and encouragement in my build
Just want to say that now before I forget

Thanks Scott..... Feeling all warm and fuzzy inside now!... Lol...
Means a lot mate... Share the hobby love...
More updates soon, busy building a teeny cockpit with a pilot and detailing the final sidewall areas...
All the best guys..

Another picture filled update guys....
I have so much to do and so little time to do it in.... This may well be a push to the finish line. If i fail to finish it will be a first time to admit defeat and a shame as i should have had plenty of time...

So, what have i been up to i hear you say....
Detailing and cockpits guys.... Come take a look..

No ship is complete without a collection of guns. Lets start with those then ..





Lots of little bits to build and detail the guns with.









More on the guns later. Its Cockpit time and i need to work it as it still resembles a cake icing piping nozzle.
I have dared myself to open up the windows and build a cockpit interior and a pilot figure.... #I must be mad#













Interior time..





Backwall piece and detail....



































Teeny chairs...















Teeny consoles...









..... and a Milliput pilot figure...















Yeah.... its small.... please forgive the crude sculpting and rubbish macro pictures... lol...







She sits in there quite nicely..















Right... Shall we finish detailing the mail hull sidewalls??
An old lolipop/sucker stick, the styrene type..































Oh, them guns are dry and trimmed ready to add once the main hull is painted and the gun canopy glass has been unmasked..





Main sidewall detailing using anything and everything that could fit...







































... and i think we are ready for paint to the main hull. The cockpit needs some work, and glass, and painting but i have made that piece separate so i can add it last.. ya see.... method in my madness... lol...

Right i think that's a nice high picture count for now... lol..
As always guys, thanks for dropping by for a look and thanks to those that leave a comment.
Not long to go, lets hope the painting fairy pays my build a visit real soon...
Take care, stay safe and well where ever you are in the world guys..
Happy Modelling...

Another real quick..( hahaha... yeah right... I hear you say!)... Update.

So last time we finished off with the final big detailing session...
Today we continue the cockpit, guns and even apply some poundland/Dollar store grey auto primer for a dark base coat..

The Falcon and the Otana both have a similar front cockpit glass area/wind shield.
Its gonna be another micro cut piece..





Sanding cocktail sticks... a must for the Ultimate development department me thinks... Copyright Wappynutter.. lol...











Just the center bar to add then it can be primed..
Guns are finished..











Taping up ready to prime. Gonna prime as 2 hull halfs then join together once i have finished the detail painting on the cockpit neck/corridor piece.









The top piece on the cardboard is the rear engine piece.



Dark grey Auto primer is applied..























Well i think the detail stands out well now so thats a plus..
So i promised a "Quick" update but still managed to inflict mass image overload... Sorry guys...
More soon.... Nearly white painting time...
Take care, Happy Modelling..

All those bits and bobs you made start to blend in and look completely appropriately placed
Looks good in primer

Twokidsnosleep wrote:All those bits and bobs you made start to blend in and look completely appropriately placed
Looks good in primer

Thanks Scott.. Yeah i thought so too. Everything has blended now it has one uniform colour.
The greeblies on the sides look great... in my opinion anyway.
Thanks again bud..

Back again..... Another quick progress report on the Otana..
A good collection of pictures again, but as i have made 3 or 4 posts over the past week or so this wont be a massive one..
So..... Cockpit and some painting time!.. Yay!!

Little detailing bits added to the consoles..





...and now the interior painting begins, including our little pilot..











Engines got an oil paint..





Close up of the Pilot...









Back wall detail..

















I also managed to grab 1 whole hour to myself this morning so.... Painting Fairy time!!..
Chose Modelcolor "Off White"..





Lay my spraying cardboard out on the worktop and made a start..







































So apart from me over thinning the paint and then laying on to many coats too close together before the other had dried causing some fat edges and sags out of the panel lines... That should get me far enough in to paint the detail and close up the hull.
A quick flat down and another couple of thin coats can then be applied once the hull is in 1 piece to make it all uniform and lose the sags.

Thanks Guys for dropping by for a look. I still might make the deadline. I have around 18 days until i leave for Disneyland Paris...
Stay safe and well, Happy Modelling..

Oh dude, look at that all painted up, it is amazing!!!!
You are not a pull it out of a box and glue it together and bitch it doesn't fit to your standards kind of guy
YOU MADE ALL OF THIS!!!
Very, very impressive
for the weekend

It never occurred to me that you would surpass the Logan's Run air car, well I was wrong about that.
Knocked out of the water and you aren't even finished.
That cockpit is insane Andy.
A thousand kinds of awesome and smells like magnificent!
I'm stunned bud.
Not because I was born that way... This is different.
Dude!.... Wow!

Twokidsnosleep wrote:Oh dude, look at that all painted up, it is amazing!!!!
You are not a pull it out of a box and glue it together and bitch it doesn't fit to your standards kind of guy
YOU MADE ALL OF THIS!!!
Very, very impressive
for the weekend

Haha... Cheers Scott. The down side is that I kick myself even more when things don't look right... Or I miss certain details I wanted or needed to add!.. There are no instructions or build steps to guide the build or painting process!... Lol...
The next stage is the hardest.... Convincing Millennium Falcon-like paint job..
Faded coloured panels and chipping and weathering convincingly at this scale!!..
Thanks again bud, enjoy the weekend..

Coen wrote:It never occurred to me that you would surpass the Logan's Run air car, well I was wrong about that.
Knocked out of the water and you aren't even finished.
That cockpit is insane Andy.
A thousand kinds of awesome and smells like magnificent!
I'm stunned bud.
Not because I was born that way... This is different.
Dude!.... Wow!

Hahaha... Thanks Mike, always enjoy your ego boosting comments bud.
The Solar Car is still my favourite build... This mini build is by far the most complex and small scale detailed one!.
Hoping the Modelling Gods shine on me this next 2 weeks so I can finish it all up before I nip to Paris with the Mrs and Kiddies for a week before Christmas with Mickey Mouse and Santa!.
Thanks again for all the support mate, greatly appreciated..
Take care bud...

Have a great trip

Twokidsnosleep wrote:Have a great trip

Thanks Scott, will do bud..

OMG Andy stunning cockpit mate love it.

Nige201980 wrote:OMG Andy stunning cockpit mate love it.

Hey Nige, thanks for dropping by mate. Glad you like the cockpit, the first part of this update will list the finishing up of the cockpit and a little painting.. Hope you enjoy the post..
Thanks again..


So yeah, another update, may be my last we'll see. gotta push on as i leave for my hols in 9 days..
... and as usual there is Sooooo much to do..

Time is really limited and obviously the baby take priority.
Also i dont wanna rush and ruin it as i have come so far and put my heart and soul into this build. It really has been a love/hate relationship for a long time...
Anyways... Progress report.. and as always..
#Lots of pictures incoming!!#

Talking of cockpit earlier i thought i would share its humble beginnings in its Asda/Walmart packaging..









..and as it looks all with the interior installed... See the smiling happy pilot in there?? lol..

Time to add the glass and outer hull skin... You'll see....
Thin plastic packaging film...





Cut...... wrap...... glue..... carefully...



First part of the outer plating...



First though we'll hot glue the back wall in to seal up the back...









Then using Revell glue, zip-tied the piece while it dried adding to help hold the glass plastic in place...











It worked so once dry i continued with the lower cockpit hull plating..



CA glue and Revel glue used this time... very carefully. I tested the CA first with some off cuts practice for fogging etc... Seemed okay.







Time to re create the glazing bars and PVA glue them on the clear glass plastic..















So i have in effect created a sandwich of styrene with a clear plastic filling... lol....

...and the nose section gets its clear glass plastic PVA glued on..



The off white looks better with a flat down and another couple of coats..









Painted some detail panels on the cockpit corridor..





... and finally....... #Blows trumpets.... Ta-Da!!# glue the hulls together....







A few teething problems with alignment and warpage but not overly stressful. Used every glue i have to close it up including 2 pack epoxy..

Back to the cockpit as it needs finishing and a mask off and prime..









... and side by side with the original piping piece it started off as..



I spy a pilot....



I do love a good detailed hull...





Cockpit is masked off!...





... and primed....





Time to check the lights...



Still having warpage problems here.... Not now though...



Gonna glue up the engine piece and check for light leakage.... This is all your doing Scott, if it don't work we all blaming you mate.. lol.













#Yeah!!!#















Yes they still work... a little light leakage on the engine itself but no where else.... easy cure then.....

Cockpit got a coat of off white to match the hull now....





Engine got its cover on while i repaint over the black out and filler i added in the joints that leaked blue light..









Okay nearly up to date.. Got a three tone camo to paint on... Yep, some coloured panels, light grey, dark grey and a grey blue couple.
This is a little like the Falcon scheme. Not gonna be worn and chipped like the Falcon, but will get a wash, pin and panelfade treatment... Hopefully...

Bottom first...









Blue, mid and dark grey all mixed up in little pots ready.....





Fingers crossed... light grey and dark grey first....









Blue next....



























So...as you can tell i am real happy with how that turned out.. This is my progress for now. I will paint up the detail panels around the gun turret sides and tape up the top panels over this weekend, may even get the top panels painted by Monday. Then it'll be a gloss coat and pin wash etc....
Maybe i will get finished on time.. we'll see.. Wish me luck guys..

Fingers crossed for a final update next weekend with a final reveal on the Monday night before i depart Tuesday afternoon for Paris.
Until the next time, take care Guys, stay safe and well... Thanks for taking a look as always, its much appreciated..
Happy Modelling..

Looking great now she is all together
Better hurry, I am almost finished

Twokidsnosleep wrote:Looking great now she is all together
Better hurry, I am almost finished

Thanks Scott.... Still loads to do and no time to do it in!...
Will be gutted if I stumble at the finish line. I so want to have her finished for you, Gav and the guys..
There is still a chance, I have a week yet!..
Thanks again for taking a look and leaving a comment, much appreciated mate.
More soon hopefully!...

She is really looking the part now Andy you can't tell she's all scratched built love love love the lights. This is really top draw stuff mate.

This another incredible project I can't believe someone actually tried! Wow!

DBMiller wrote:This another incredible project I can't believe someone actually tried! Wow!

Thanks Don, greatly appreciate the kind comment buddy..
Still spraying the camo panels as I write this. All the two tone grey and blue is finished top and bottom. Some detail painting then a gloss coat, that's tomorrow's mission. Gonna try this aquagloss and try not to fluff it up!.. Lol..
Thanks again mate... All the best..

I still think.you are a mad (in a good way)
The build is looking great so far
Keep it up , you are almost there

I've got so much envy for your build Andy. Haha. It's a magnificent little thing.
I love this to bits buddy.
It's just so damned inspirational for me to see what you do.

Amazing!!!!!!!!!!!!!!!

say no more

We are all cheering you on to finish..me especially so you can get this off your mind during your holiday. You are very close
I have had an enormous relief finishing and can mull it over before photo time
Again, have a great holiday trip and Holiday season

MarkVerploeg wrote:I still think.you are a mad (in a good way)
The build is looking great so far
Keep it up , you are almost there

Haha... Thanks Mark... I'm as Mad as a Hatter for sure.. Who in there right mind builds a teeny scale Star Wars ship from a 16 year old video game??
A Star Wars Nerd like me I suppose.. Lol...
Thanks as always for the kind comments mate.

Coen wrote:I've got so much envy for your build Andy. Haha. It's a magnificent little thing.
I love this to bits buddy.
It's just so damned inspirational for me to see what you do.

Thanks Mike, its the weathering etc that I stumble with.. As you have seen on Facebook.. Lol..
We will sort it out I'm sure... You guys are awesome and have supported my lost cause all the way.. Ha!..
Thanks again buddy..

felisbarcinonensis wrote:Amazing!!!!!!!!!!!!!!!

Thanks again Felis for such kind encouraging comments.. Means a lot mate.
All the best Sir..

kiwigav wrote: say no more

Ha.... Thanks Gav, nearly finished, just stressing over weathering and finish now then its on the base and final reveal.. Before Tuesday all being well!.. Lol..
Thanks again mate..

Twokidsnosleep wrote:We are all cheering you on to finish..me especially so you can get this off your mind during your holiday. You are very close
I have had an enormous relief finishing and can mull it over before photo time
Again, have a great holiday trip and Holiday season

Thanks again Scott, you are so right.... Weathering and finish is making me Swear but its gonna be okay I'm sure..
Update coming soon.. Then fingers crossed for a final reveal before I depart Tuesday afternoon. Eurostar to Disneyland Paris.. and MISS the release due to being in Paris and not prebooking tickets to watch in the Disney Cinema in downtown Disney..
Gotta wait till I get back home the following Monday!.. No spoilers guys please!...
More soon..

Cool, high speed train between London and Paris....is very exotic for a boring Canadian who has never been on a train before
Your family will have a blast I am sure

Twokidsnosleep wrote:Cool, high speed train between London and Paris....is very exotic for a boring Canadian who has never been on a train before
Your family will have a blast I am sure

Ha... High-speed it is Scott and not forgetting it goes under the sea for 30 miles in the Eurotunnel.
The air pressure is like flying, makes your ears pop and muffles the sound..
A lot of holiday makers I have noticed have actually cancelled their Paris Disney trips fearing the terrorist threats recently.
We still going, its cost too much to cancel so close. Lol..
This build is so close now.. Your gonna love it. I hope..
All the best mate.. Thanks again..

This should be my final update..... Fingers crossed for a reveal before the release next week....
Lots of pictures for the last time guys!....
ISM Facebook users will have already seen the progress so i apologise if all this is old news for you guys..

So i have finished detailing the bottom...





The upper hull got the same treatment..





Grey...



Dark grey....





Blue...











Detail painting...





All painted up.





Painted the gunners window frames top and bottom..







Time to add the guns..

















Before adding a Ultimate Dark Dirt wash i Aquagloss the entire build..













.... and look at those panel lines POP!...













Once happy with the clean up i glossed to seal it all in then put the question to the ISM Facebook community asking for honest, constructive criticism as opposed to weathering and finish. The contrast between dark lines and white panels was too stark and needed something i just wasn't sure what..







It was decided over the course of the post to add some smoke etc.. to simulate dust, wear and grime..
A coat of 70/30 mix Ultimate thinner/Vallejo Smoke was dusted over the model followed by a similar mix of Buff colour..
In the artificial light the results looked like my Otana had a 60 a day smoking habit, but once natural daylight was available i set to work with Ultimate thinner and cotton buds to clean up and give a suitable finish...











I continued to work until...... well i wont share any more here...
Needless to say the clean up gave the desired effect, i have umm'd and ahh'd over panel streaking but have chosen to just Flat Matt coat, mount on the base, wire the lights and take a load of Reveal pictures...
That's saved for the reveal as i am about to mix up the Matt coat and start spraying in the morning..
A BIG Thanks to the In-Law KingDan for the use of the new Improved Dark Dirt Wash, and also the bottle of Vallejo Smoke donated to the cause.. Cheers dude..
As always, Thanks for taking a look and commenting Guys, all your input is greatly appreciated..
Look out for the final reveal over the next couple of days....
Take care, stay safe and well...
Always....Happy Modelling..

She is looking good pal

Great build Andy
It looks awesome

Brilliant work Andy always look forward to seeing you posts and builds.

Twokidsnosleep wrote:She is looking good pal

Thanks Scott for the continued support and encouragement. She's finish too now, I'm sat staring at her in front of me!
Hoping for a bright, clear, dry day for lots of natural light photo's tomorrow.
Fingers crossed..

MarkVerploeg wrote:Great build Andy
It looks awesome

Thanks Mark much appreciated mate. All done just awaiting a dry day for Photographs..
All the best..

Nige201980 wrote:Brilliant work Andy always look forward to seeing you posts and builds.

Thanks Nige, just awaiting some bright, clear, dry days for taking some pictures..
Thanks again for your continued support mate..

Championship level of awesome Andy!!
I can't wait to see the reveal.

glad I could help you get it finished in time hurry up with the reveal


Dan

Coen wrote:Championship level of awesome Andy!!
I can't wait to see the reveal.

Championship level... lol... I wish Mike, but thanks for the ego boost bud.. greatly appreciated.
Reveal soon bud..

Kingdan wrote:glad I could help you get it finished in time hurry up with the reveal


Dan

Reveal soon Bro.... Thanks again for the samples and spare bottle of Smoke.. appreciated mate...
Nearly reveal time...