Re: What modelling goodies did the postman deliver today....
Posted: Fri Nov 18, 2022 9:04 pm
Ohh - thats nice! Been tempted by that so I'll be very interested when you do the build!!
Scale Model & Modelling Forum
https://dev.globalscalemodeller.com/
Ohh - thats nice! Been tempted by that so I'll be very interested when you do the build!!
Not seen that boxing before. It's a great piece of box top art.


Nice pick ups......is it time to restock the stashTwokidsnosleep wrote: Mon Nov 28, 2022 11:20 pm This is deja-vu all over again
Another Tamiya Lola open wheel kit
I got this much cheaper as the decals are mangled....BUT I got these from Indycals
To make Canadian Scott Goodyear's Lola
Like I need anymore model kits or projects![]()


Embarrassingly, the Stash is stupidly out of control. I had it organized in here and you could see the closet floor



Twokidsnosleep wrote: Wed Nov 30, 2022 2:51 amEmbarrassingly, the Stash is stupidly out of control.
The model room closet floor is over spilling and piling up towards the ceiling
Perhaps the Christmas Holidays will find me some time to clean up and re organize![]()
I have the same problem - and just to compound things these two arrived today:Twokidsnosleep wrote: Wed Nov 30, 2022 2:51 amEmbarrassingly, the Stash is stupidly out of control. I had it organized in here and you could see the closet floor
But no more
The model room closet floor is over spilling and piling up towards the ceiling
The secondary desk is getting over-stuffed underneath it as well
This is just the model room stash…there are others
Perhaps the Christmas Holidays will find me some time to clean up and re organize![]()



Nice!psmithmags wrote: Thu Dec 01, 2022 4:14 pm A bit of a cheat here, but I'll use the excuse that the posties are on strike. Went to a supermarket ( German one Ald*, if you're interested) and got these quite cheaply. Main idea is to try to improve my pin wash/detailing techniques etc.
![]()
Nice buys.....Aldi here seems limited to trucks once every 6-9 monthspsmithmags wrote: Thu Dec 01, 2022 4:14 pm A bit of a cheat here, but I'll use the excuse that the posties are on strike. Went to a supermarket ( German one Ald*, if you're interested) and got these quite cheaply. Main idea is to try to improve my pin wash/detailing techniques etc.
![]()
Cheers Scott, there is also a Hurricane and a Hunting Percival Jet Provost available in the deal, however, I was too late finding out about the offer to get them.Twokidsnosleep wrote: Thu Dec 01, 2022 8:23 pmNice!psmithmags wrote: Thu Dec 01, 2022 4:14 pm A bit of a cheat here, but I'll use the excuse that the posties are on strike. Went to a supermarket ( German one Ald*, if you're interested) and got these quite cheaply. Main idea is to try to improve my pin wash/detailing techniques etc.
![]()
No cheat, they all count
Cheers Digger, I've only ever completed one truck, the Motorhead tour truck and to be honest I really enjoyed it. I might take too much of a kicking in the wallet on that offer.digger303 wrote: Thu Dec 01, 2022 10:35 pmNice buys.....Aldi here seems limited to trucks once every 6-9 monthspsmithmags wrote: Thu Dec 01, 2022 4:14 pm A bit of a cheat here, but I'll use the excuse that the posties are on strike. Went to a supermarket ( German one Ald*, if you're interested) and got these quite cheaply. Main idea is to try to improve my pin wash/detailing techniques etc.
![]()
![]()
Not really the trucks normally go for $40audpsmithmags wrote: Fri Dec 02, 2022 10:41 amCheers Digger, I've only ever completed one truck, the Motorhead tour truck and to be honest I really enjoyed it. I might take too much of a kicking in the wallet on that offer.digger303 wrote: Thu Dec 01, 2022 10:35 pmNice buys.....Aldi here seems limited to trucks once every 6-9 monthspsmithmags wrote: Thu Dec 01, 2022 4:14 pm A bit of a cheat here, but I'll use the excuse that the posties are on strike. Went to a supermarket ( German one Ald*, if you're interested) and got these quite cheaply. Main idea is to try to improve my pin wash/detailing techniques etc.
![]()
![]()


It's not a very big kit, but it looks good on the sprues.DRUMS01 wrote: Mon Dec 05, 2022 4:23 am Hey Tomcat, those figures look killer, especially Sir Kay.
That Japanese prime mover sure is different, I like it digger. Let me know what you think of the kit after your done with it.
And that BAC TR-2 in 1/48 looks like it can be a sweet build, looking forward to that one.
Yesterday both of my items I was waiting for to finish the Arado AR196 finally finally arrived. I only have short work left on the Spartan figures so I hope to be getting back into the seaplane this week.
Oh, one more thing,... I just received my 1/16 Sherman from Andy's Hobbies but my better half says it has to wait till Christmas. I also picked up a 1/20 Fujimi Brabham BT46B F-1 fan car, and a Tamiya M60A2 including turned brass ammo. Photos soon.
Ben and Jarrod
There is - seemingly - a LOT of plastic in the box!!DRUMS01 wrote: Mon Dec 05, 2022 4:23 am <snipped>
And that BAC TR-2 in 1/48 looks like it can be a sweet build, looking forward to that one.
</snipped>

Ok, so this is the gun which will come with the Ural!RangerNeil wrote: Tue Dec 06, 2022 3:02 pm Second D30 arrived today - this is the late model one and will be assembled in the towing position for the Ural.
![]()
Yep. Going to use the kit barrel on this one. See build thread for details.ForeverPlasticKits wrote: Tue Dec 06, 2022 8:00 pmOk, so this is the gun which will come with the Ural!RangerNeil wrote: Tue Dec 06, 2022 3:02 pm Second D30 arrived today - this is the late model one and will be assembled in the towing position for the Ural.
![]()
![]()
Really nice buying, great books.


This 1/24 I take it ?Johnj wrote: Thu Dec 08, 2022 1:26 pm I've had it for a week or so, but just getting round to having a good look through it.
Cant believe i'm gonna say this, but it looks as good as the modern 1/32 tamiya's. Not a hint of flash that i can see. If it goes together as good as it looks it'll be a winner !!!
![]()
Sorry mr D, yeah 1/24th.digger303 wrote: Thu Dec 08, 2022 10:57 pmThis 1/24 I take it ?Johnj wrote: Thu Dec 08, 2022 1:26 pm I've had it for a week or so, but just getting round to having a good look through it.
Cant believe i'm gonna say this, but it looks as good as the modern 1/32 tamiya's. Not a hint of flash that i can see. If it goes together as good as it looks it'll be a winner !!!
![]()
It looks amazingly excellent for Airfix.![]()
It's going to take a jar or 2 of paint.
![]()
![]()
![]()
![]()
![]()
Johnj wrote: Fri Dec 09, 2022 1:00 amSorry mr D, yeah 1/24th.digger303 wrote: Thu Dec 08, 2022 10:57 pmThis 1/24 I take it ?Johnj wrote: Thu Dec 08, 2022 1:26 pm I've had it for a week or so, but just getting round to having a good look through it.
Cant believe i'm gonna say this, but it looks as good as the modern 1/32 tamiya's. Not a hint of flash that i can see. If it goes together as good as it looks it'll be a winner !!!
![]()
It looks amazingly excellent for Airfix.![]()
It's going to take a jar or 2 of paint.
![]()
![]()
![]()
![]()
![]()
I didnt even realise the camera hadnt picked up the scale on the bottom left hand corner.
I'm sure i have a paint tray and roller lying at the back of a cupboard somewhere![]()


It looks great and it's going to put a bit of sparkle in the kit.RangerNeil wrote: Tue Dec 13, 2022 12:08 pm The metal barrel kit for the D30 arrived today. It looks nice.
Unfortunately there are no instructions for it - and its not just the barrel & muzzle brake!!
![]()
I never realized the emplacement was made up of individual sand bags I thought it was just all one piece. In my estimation the kit just went up a notch in my mind.
You know, you can buy a 3D printer for several hundred dollars and make those yourself. Of course, you will also need the resin, which isn't cheap. It would be best if you didn't forget all the cleaning supplies either. Then there is the time it takes to learn how to do everything. But really, why spend a few dollars buying something already made when you can spend 100x as much doing it yourself?
bfrd wrote: Tue Dec 13, 2022 2:32 pmYou know, you can buy a 3D printer for several hundred dollars and make those yourself. Of course, you will also need the resin, which isn't cheap. It would be best if you didn't forget all the cleaning supplies either. Then there is the time it takes to learn how to do everything. But really, why spend a few dollars buying something already made when you can spend 100x as much doing it yourself?
Governments don't want to see anyone on wages living too high, but they let the high flyers do as they please. It's always the wage earners that get it in the neck and yet they want everyone out there spending every last cent to boost the economy which is more than likely in the toilet because they can't manage a ...t in a bordelo.....rant rantRangerNeil wrote: Tue Dec 13, 2022 3:39 pmbfrd wrote: Tue Dec 13, 2022 2:32 pmYou know, you can buy a 3D printer for several hundred dollars and make those yourself. Of course, you will also need the resin, which isn't cheap. It would be best if you didn't forget all the cleaning supplies either. Then there is the time it takes to learn how to do everything. But really, why spend a few dollars buying something already made when you can spend 100x as much doing it yourself?![]()
![]()
Funnily enough I did plan on getting a printer next year to go the DIY route for lost/damaged parts.
Unfortunately HMG has just killed that idea by taking £200/month of my company pension in taxes for having the cheek to draw the state pension.

That'll be a unique subject for a build most definitelyForeverPlasticKits wrote: Sun Dec 18, 2022 8:26 pm Maybe the last purchase of this year, this excellent french self-propelled artillery gun. All the sprues have their bags, bit strange but why not?
![]()

Nice find.digger303 wrote: Tue Dec 20, 2022 4:38 am Came across this at half retail 10 days ago.
Looks very nice.
![]()
RangerNeil wrote: Tue Dec 20, 2022 1:50 pmNice find.digger303 wrote: Tue Dec 20, 2022 4:38 am Came across this at half retail 10 days ago.
Looks very nice.
![]()
You can now stage a Grad strike on recalcitrant kits!!!
![]()
![]()
That'll be a fun build, like a modern version of a Katyushadigger303 wrote: Tue Dec 20, 2022 4:38 am Came across this at half retail 10 days ago.
Looks very nice.
![]()
Excellent, i like this rocket launcher!digger303 wrote: Tue Dec 20, 2022 4:38 am Came across this at half retail 10 days ago.
Looks very nice.
![]()



A wide selection across genres and scales.RangerNeil wrote: Wed Dec 21, 2022 11:58 am Santa came today (wellll - OK, it was the postie with a back-log from the strike...)
Felt like Santa though with these niceties:
![]()