Global Scale Modeller

Posted: **Fri Jul 31, 2020 7:38 am**

Thanks for looking in and your comments guys

Posted: **Sun Aug 02, 2020 9:13 pm**

The build continues with the fitting of the front and rear suspension . I splatted one of the box's at the rear with glue by accident so its a respray job for tomorrow now

P8028138 by andrew purchase, on Flickr

P8028140 by andrew purchase, on Flickr

P8028142 by andrew purchase, on Flickr

Posted: **Sun Aug 02, 2020 9:41 pm**

Looking awesome Andy!

Posted: **Mon Aug 03, 2020 6:50 am**

Thanks for looking in and your comments Cris

Posted: **Mon Aug 03, 2020 8:11 am**

Looking great Andy! You’re making good progress, coming along nice & steady

Posted: **Mon Aug 03, 2020 10:28 am**

Looking great mate!

Posted: **Mon Aug 03, 2020 6:05 pm**

Thanks for looking in both and your comments

Posted: **Tue Aug 04, 2020 12:12 am**

Just doing the same car in Fujimi 1/24, it's good but this is something else! Excellent work, thank you for sharing your build.

Posted: **Tue Aug 04, 2020 9:07 am**

thanks for looking in and your comments

Yh I did a Fujimi a while back there not bad little kits and capture the subject well .

Posted: **Thu Aug 06, 2020 8:37 pm**

Assembly continues with the cockpit. Still more to add here like rivets and PE. The seats were painted charcoal grey and then the pre-glued sequins were attached to look like the real cars seat . The discs were there to try and keep the driver cool to try and get a flow of air through the seat as the cars ran very hot .Most cars had silver disc's but I have also seen gold discs too on some cars.

P8068151 by andrew purchase, on Flickr

P8068153 by andrew purchase, on Flickr

P8068154 by andrew purchase, on Flickr

P8068156 by andrew purchase, on Flickr

Posted: **Thu Aug 06, 2020 8:40 pm**

Very nice Andy! Those seats are molded so well they look real.

Posted: **Thu Aug 06, 2020 9:44 pm**

Interesting info about the seat rings...would think they would get hotter with a metal bezel like that

Anyhow, yours are looking great. Tedious work there

Posted: **Thu Aug 06, 2020 10:00 pm**

Twokidsnosleep wrote: Thu Aug 06, 2020 9:44 pm Interesting info about the seat rings...would think they would get hotter with a metal bezel like that
Anyhow, yours are looking great. Tedious work there

The seats were just a strip of cloth down the centre with the air discs and the sides were padded around the frame

Posted: **Fri Aug 07, 2020 12:22 am**

Hawkmoon wrote: Thu Aug 06, 2020 10:00 pm
Twokidsnosleep wrote: Thu Aug 06, 2020 9:44 pm Interesting info about the seat rings...would think they would get hotter with a metal bezel like that
Anyhow, yours are looking great. Tedious work there
The seats were just a strip of cloth down the centre with the air discs and the sides were padded around the frame

Sounds comfy

Posted: **Fri Aug 07, 2020 1:51 am**

Love the high detail of the seats, supposedly the drivers said that the GT40 seats were the comfiest race that they had sat in yet they really don’t look comfortable at all haha

Great work so far Andy

Posted: **Fri Aug 07, 2020 8:52 am**

Thanks everyone for looking in and your comments

@Bdiddy The drivers all sweated like pigs even with the sets as they are. The radiators are all at the front apart from the oil cooler. So two armoured pipes without insulation ran inside the central propshaft type console along the floor. These pipes being un-insulated radiated heat throughout any race slowly cooking the driver alive

Posted: **Fri Aug 07, 2020 8:52 am**

Hawkmoon wrote: Fri Aug 07, 2020 8:52 am Thanks everyone for looking in and your comments

@Bdiddy &Twokids The drivers all sweated like pigs even with the sets as they are. The radiators are all at the front apart from the oil cooler. So two armoured pipes without insulation ran inside the central propshaft type console along the floor. These pipes being un-insulated radiated heat throughout any race slowly cooking the driver alive

Posted: **Fri Aug 07, 2020 10:20 am**

Seats looks some awesome

Posted: **Sat Aug 08, 2020 5:18 am**

Very nice work as always.

Posted: **Sat Aug 08, 2020 10:03 am**

Thanks for looking in and your comments both

Posted: **Sat Aug 08, 2020 10:57 am**

Wow seats look so real.

Posted: **Mon Aug 10, 2020 8:14 pm**

digger303 wrote: Sat Aug 08, 2020 10:57 am Wow seats look so real.

Thanks for looking in and your comments Digger

Posted: **Mon Aug 10, 2020 8:19 pm**

Havent forgot this build just lost my mojo for a couple of days but heres some progress. The seats have been fitted after the seat belts were added along with rivets and etch detail. The roll bar has only been dry fitted for now.

P8108160 by andrew purchase, on Flickr

P8108163 by andrew purchase, on Flickr

Posted: **Mon Aug 10, 2020 9:51 pm**

Looks awesome Andy!

Posted: **Tue Aug 11, 2020 1:56 am**

It looks great! The detail kit was totally worth it.

Posted: **Tue Aug 11, 2020 3:41 am**

love those disc brakes, they look sensational. great progress Andy

Posted: **Tue Aug 11, 2020 9:12 am**

Thanks for looking in and your comments everyone

Posted: **Tue Aug 11, 2020 6:13 pm**

Loving the progress! That engine is amazing!

Posted: **Wed Aug 12, 2020 7:19 am**

Thanks for looking in and your comments everyone

Posted: **Wed Aug 12, 2020 5:53 pm**

Ok got the doors together today and added the etch inner door cards. Started adding etch and parts to the next part of the assembly

P8128164 by andrew purchase, on Flickr

P8128167 by andrew purchase, on Flickr

P8128168 by andrew purchase, on Flickr

Posted: **Thu Aug 13, 2020 8:08 pm**

Work continues with the dash.

P8138175 by andrew purchase, on Flickr

P8138178 by andrew purchase, on Flickr

P8138179 by andrew purchase, on Flickr

Posted: **Thu Aug 13, 2020 8:47 pm**

Oh wow

The metal bits and bobs look great

Posted: **Thu Aug 13, 2020 8:52 pm**

That looks awesome Andy!

Posted: **Thu Aug 13, 2020 11:47 pm**

Looking nice!

Posted: **Fri Aug 14, 2020 1:07 am**

That dash is gorgeous!

Posted: **Fri Aug 14, 2020 8:34 am**

Thanks for looking in and your comments everyone

Posted: **Fri Aug 14, 2020 2:25 pm**

This is awesome! Keep up the good work on this one

Posted: **Fri Aug 14, 2020 7:02 pm**

Thanks for looking in and your comments

Posted: **Fri Aug 14, 2020 7:09 pm**

Dash is fitted as more gets added ,doors are a test dry fit. Made up the steering wheel.

P8148181 by andrew purchase, on Flickr

P8148183 by andrew purchase, on Flickr

P8148184 by andrew purchase, on Flickr

P8148185 by andrew purchase, on Flickr

P8148187 by andrew purchase, on Flickr

P8148189 by andrew purchase, on Flickr

Posted: **Sat Aug 15, 2020 2:32 am**

I didn't realize how large this model is until your hand was in the picture for reference. This is going to be amazing!

Posted: **Sat Aug 15, 2020 3:17 am**

this just keeps looking cooler & cooler Andy, the detail in the steering wheel is unbelievable

Posted: **Sat Aug 15, 2020 9:52 am**

BigWall wrote: Sat Aug 15, 2020 2:32 am I didn't realize how large this model is until your hand was in the picture for reference. This is going to be amazing!

Yes she is a good size thats why it was always in demand as the scope for super detailing could be used to the max if wanted

Posted: **Sat Aug 15, 2020 9:53 am**

Bdiddy wrote: Sat Aug 15, 2020 3:17 am this just keeps looking cooler & cooler Andy, the detail in the steering wheel is unbelievable

Yes I must agree the steering wheel is way above the norm for detail and just eye poppin candy

Posted: **Sat Aug 15, 2020 9:54 am**

This is amazing mate! The detail you're adding blows me away!

Posted: **Sun Aug 16, 2020 7:20 pm**

LWWales wrote: Sat Aug 15, 2020 9:54 am This is amazing mate! The detail you're adding blows me away!

Thanks for looking in and your comments

Posted: **Sun Aug 16, 2020 7:31 pm**

Made up the front radiator but did not glue in place as it will be a different color to the main body like the oil tank situated where the spare was placed. There are still some etch straps,pipework and fittings to fit at the front but there going on after paint. Added all the remaining etch and parts to this sub assembly so its now ready for paint,decals and 2k.

P8168193 by andrew purchase, on Flickr

P8168195 by andrew purchase, on Flickr

P8168198 by andrew purchase, on Flickr

P8168200 by andrew purchase, on Flickr

P8168202 by andrew purchase, on Flickr

P8168203 by andrew purchase, on Flickr

P8168205 by andrew purchase, on Flickr

Posted: **Sun Aug 16, 2020 8:00 pm**

Looking great Andy! I didn't realize it was a big 1:12 until I saw your hand holding it the other day.

Posted: **Mon Aug 17, 2020 9:07 am**

Thanks for looking in and your comments Criss. yh 1/12 is about as big as Iwill go these days just the right size for detailing and display

Posted: **Mon Aug 17, 2020 9:10 am**

Damn Hawk! I can't wait to see the paint going down on this one.

Posted: **Mon Aug 17, 2020 9:33 am**

Love seeing an update on this one. I'd never heard of KA before this, do they do much for other cars?

Global Scale Modeller

Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12

Re: Magnifier Ford GT-40 mk11 1.12