Global Scale Modeller

Tomcat64 wrote: Mon Oct 05, 2020 1:31 pm Really nice work - as Digger already said those gun sights look superb, very delicate

digger303 wrote: Mon Oct 05, 2020 12:51 pm excellent work with the gun sights.

Thank you, the sight are what put me off starting the kit the most....apart from the wingnuts that are glued to them. I do have a bit of glue to clean up, is a bit messy and one of the wingnuts went for a fly. Luckily though I found it back on the desk.

Very nice! The gun looks nicely detailed.

Rugash wrote: Mon Oct 05, 2020 1:56 pm

Tomcat64 wrote: Mon Oct 05, 2020 1:31 pm Really nice work - as Digger already said those gun sights look superb, very delicate

digger303 wrote: Mon Oct 05, 2020 12:51 pm excellent work with the gun sights.

Thank you, the sight are what put me off starting the kit the most....apart from the wingnuts that are glued to them. I do have a bit of glue to clean up, is a bit messy and one of the wingnuts went for a fly. Luckily though I found it back on the desk.

Don't know how you get the wingnuts to behave. In my kit I lost 2 to the vast reaches of the cave. Everytime I thought I had one inserted correctly my shaking hand would bump it out again....VERY frustrating.

Looking good mate.

That gun mount and sight looks superb. Great work Sir

I have been missing for a little while again. So here goes with my progress so far.
Painting, Chipping, Rusting etc.

Starting with the exhaust, I tried some washes over Vallejo Steel 71.065 but didn't look the best. Haven't gotten any pigments as yet, so I might add them as yet.

20201018_203752 by Matthew Ashby, on Flickr

20201018_203812 by Matthew Ashby, on Flickr

Wiped the washes off and went down a different track. The Vallejo steel, followed by a few light coats of Panzer Aces 70.822 German Camo Black Brown, followed by a few light coats of Model Air 71.130 Orange Rust, then a couple of coats of Life Color LPW-09 Orange Marks (liquid pigment wash). As you can see, I was very accurate with how many coats I sprayed!

20201024_135441 by Matthew Ashby, on Flickr

20201024_145752 by Matthew Ashby, on Flickr

20201024_145757 by Matthew Ashby, on Flickr

A few scratches, dirt or mud at some point will fix it up a little better.

Next little bit was the timber on the gun platform.
I used Vallejo 70.876 Brown Sand for the timber colour, Vallejo matt varnish sprayed over the sand prior to chipping fluid sprayed over that before the olive drab (I didn't use hair spray as I just couldn't get it to spray well once decanted).
Then the usual, a little water, brushes, q-tips etc. to clean away the olive drab.

I did go for the lighter faded olive drab for the first coats and will be chipping the olive drab further with the darker shade using brushes and sponge technique. The detailing and extra painting is a little new to me so I practice on an old 1/30 T-34 to try things out first as I have a pretty good right arm!

20201024_143948 by Matthew Ashby, on Flickr

Sorry there are no in between photos after the sand was sprayed, but here a few after scratching the olive drab off. Also, my photos probably aren't the best as yet. Working on it though!

20201102_200922 by Matthew Ashby, on Flickr

20201102_200906 by Matthew Ashby, on Flickr

20201102_200854 by Matthew Ashby, on Flickr

20201102_200900 by Matthew Ashby, on Flickr

Finally, some general painting of other components.


20201102_222418 by Matthew Ashby, on Flickr

20201102_222423 by Matthew Ashby, on Flickr

20201102_222435 by Matthew Ashby, on Flickr

20201102_222507 by Matthew Ashby, on Flickr

20201102_222429 by Matthew Ashby, on Flickr

Comments are welcome, my skin is pretty thick. As my father says.....like my head!

Got nothing , but good things to say ...
keep up the good work

Nice, nice, nice, nice, nice.

As french i like this subject so much, well done!

That's coming along really well - and very nice woodwork on the decking sections too

Back again, I will catch up shortly with everyone's builds. The usual things getting in the way and requiring more time than building.
Will let the photos speak for themselves, I may not get this finished by the 31st but will see how I go.

A shame to cover most of it with mud , still not finished that yet.


20201129_195021 by Matthew Ashby, on Flickr


20201129_194946 by Matthew Ashby, on Flickr


20201129_195050 by Matthew Ashby, on Flickr


20201129_195050 by Matthew Ashby, on Flickr


20201129_195220 by Matthew Ashby, on Flickr


20201221_211057 by Matthew Ashby, on Flickr


20201221_211112 by Matthew Ashby, on Flickr


20201221_215634 by Matthew Ashby, on Flickr


20201221_215729 by Matthew Ashby, on Flickr


20201221_223719 by Matthew Ashby, on Flickr


20201221_223755 by Matthew Ashby, on Flickr

Sorry for so many photos

Super build I can see the work put into the little stuff with the tones and weathering.

Cracking work. Can I ask where you got the chain please?

Very nice work. What did you use for the mud?

digger303 wrote: Mon Dec 21, 2020 12:10 pm Super build I can see the work put into the little stuff with the tones and weathering.

Yes mate, I've forgotten how many washes etc
Have just gone for a well used look, but not full of rust

Stokesy44 wrote: Mon Dec 21, 2020 11:23 pm Cracking work. Can I ask where you got the chain please?

Cheers,
Just a cheap broken chain from my Daughter, sorry can't remember the brand.

BigWall wrote: Mon Dec 21, 2020 11:29 pm Very nice work. What did you use for the mud?

Cheers,
Vallejo European splash mud 73.801 and thick mud 73.807

What work, really blinding bit of creative and beautiful scratch building and general building.
Good job chap.
DW

Have been busy as usual, but have continued bit by bit.
Almost there now, just some final assembly and a little more detail.

I am having a little trouble uploading to flicker (had a windows update ) and will post some pictures shortly.

Finally sorted out all of the settings that were changed with the Windows update

I know the time has passed, but it will be completed.
A few more photos with some more assembly and mud. I still might lay the windscreen flat for what I want to achieve.

20210307_080140 by Matthew Ashby, on Flickr

20210307_080149 by Matthew Ashby, on Flickr

20210307_080221 by Matthew Ashby, on Flickr

20210307_080229 by Matthew Ashby, on Flickr

Still going at this one
A little more assembly and a little rust added here and there, not too much though.
Just need to make a couple of masks for the windscreens to shoe the wiper tracks and a tiny bit more dried dust/dirt on the upper areas.
Need to find some more stowage for the rear box, but almost there though!

20210314_162718 by Matthew Ashby, on Flickr

20210314_162723 by Matthew Ashby, on Flickr

20210314_162730 by Matthew Ashby, on Flickr

20210314_162741 by Matthew Ashby, on Flickr

20210314_162748 by Matthew Ashby, on Flickr

20210314_162809 by Matthew Ashby, on Flickr

That is a truly amazing job. Congratulations - both on the work and the perseverance!!

That's come up very well and I wasn't expecting a proper engine either. I really like that well done.

Superb work. Beautifully painted and weathered

Cheers fellas!
I added the extra dust and may have messed it up a bit, see how it goes once it is all dry. I might end up leaving it at that then.

A couple of picks with the extra dust, turned out well once dry. Have built quite a few models over the years, but not to this level before.
So a few frustrating episodes so far, but none have learnt to fly yet!
I have frustrated myself with the masks for the windscreen, so I'll be leaving this one here as it is for now and sort it later.

A very big thank you for all of the comments etc. It has been my first "real" build with detailing, weathering and all of the little things which really make a difference. Many more to come as well!


Done for now until I can decide on some figures by Matthew Ashby, on Flickr

Done for now until I can decide on some figures by Matthew Ashby, on Flickr

Done for now until I can decide on some figures by Matthew Ashby, on Flickr

Cheers
Matt

Great job!

Excellent build Matt
Weathering looks perfect. Its a big step weathering up a perfectly finished model as it can on occasion go wrong but you nailed it here.
Mark

BigWall wrote: Sun Mar 21, 2021 8:37 amGreat job!

Casper wrote: Sun Mar 21, 2021 9:27 am Excellent build Matt
Weathering looks perfect. Its a big step weathering up a perfectly finished model as it can on occasion go wrong but you nailed it here.
Mark

Thanks fellas, have gone back to my Sherman and sd.kfz. 234/4. So shouldn't be too far off with them as well

damn nice result well done

that looks great! nice one.

Superb work. I'm sure there's a manufacturer out there that does a Bofors crew.

Found it, Bronco Models do a British / Commonwealth crew for the gun.

Parker wrote: Tue Mar 23, 2021 5:56 am that looks great! nice one.

digger303 wrote: Tue Mar 23, 2021 5:43 am damn nice result well done

Stokesy44 wrote: Tue Mar 23, 2021 8:55 am Superb work. I'm sure there's a manufacturer out there that does a Bofors crew.

Found it, Bronco Models do a British / Commonwealth crew for the gun.

Thanks Fellas
Thanks Stokesy, I will have a look at it.

Rugash wrote: Sat Mar 27, 2021 3:16 am

Parker wrote: Tue Mar 23, 2021 5:56 am that looks great! nice one.

digger303 wrote: Tue Mar 23, 2021 5:43 am damn nice result well done

Stokesy44 wrote: Tue Mar 23, 2021 8:55 am Superb work. I'm sure there's a manufacturer out there that does a Bofors crew.

Found it, Bronco Models do a British / Commonwealth crew for the gun.

Thanks Fellas
Thanks Stokesy, I will have a look at it.

Heard the sight is damn fiddly to get right on the bronco kit although a good kit.

digger303 wrote: Sat Mar 27, 2021 11:03 am

Rugash wrote: Sat Mar 27, 2021 3:16 am

Parker wrote: Tue Mar 23, 2021 5:56 am that looks great! nice one.

digger303 wrote: Tue Mar 23, 2021 5:43 am damn nice result well done

Stokesy44 wrote: Tue Mar 23, 2021 8:55 am Superb work. I'm sure there's a manufacturer out there that does a Bofors crew.

Found it, Bronco Models do a British / Commonwealth crew for the gun.

Thanks Fellas
Thanks Stokesy, I will have a look at it.

Heard the sight is damn fiddly to get right on the bronco kit although a good kit.

Yep, the sight on this was the same or I should say the wingnuts were. Three escaped my tweezers at first, but after a bit of scrounging on the floor, only one succeeded in the end.