Ok guys this will be my first GB ever and my second aircraft build ever....... So I hope I'll handle it
I chosed the eduard 1/48 Polikarpov for this build just becouse i think its an awesome looking aircraft
//Tomas
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 11:40 am
by patrickroos
Lycka till!!!
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 11:44 am
by Avgas
Got this in the stash.
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 12:34 pm
by TomasGould
patrickroos wrote:Lycka till!!!
Tackar det kommer behövas
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 12:34 pm
by TomasGould
Avgas wrote: Got this in the stash.
It looks like a nice little kit
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 3:17 pm
by TomasGould
Here's some history about the I-16
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 3:32 pm
by TommyKillander
Good luck with the build!
/Tommy
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 4:34 pm
by TomasGould
TommyKillander wrote:Good luck with the build!
/Tommy
Thanx Tommy
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 01, 2016 9:45 pm
by TomasGould
Started a little bit on the cockpit and dryfitted the fuselage I'm waiting for some paints I've ordered
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 06, 2016 8:15 pm
by TomasGould
Now the paints have arrived
I base painted the cockpit today and i hope i can weather it this weekend
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 06, 2016 8:18 pm
by TomasGould
For the blue colour i used a mixture of Vallejo 71.008 Pale Blue and 71.001 White. The green colour is a mixture of Tamiya XF-62 OD and XF-2 White
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 06, 2016 11:24 pm
by shortCummins
looking good Tomas
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 07, 2016 12:09 pm
by TomasGould
shortCummins wrote:looking good Tomas
Thanks shortCommins
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 07, 2016 3:38 pm
by martin57
great little kit fancy that one my self , good start .
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 07, 2016 6:33 pm
by TommyKillander
Great start, keep up the good work!
Tommy
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 07, 2016 9:55 pm
by TomasGould
TommyKillander wrote:Great start, keep up the good work!
Tommy
martin57 wrote:great little kit fancy that one my self , good start .
Thanks Guys
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 07, 2016 9:57 pm
by TomasGould
i did some detail painting today next will be weathering
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 09, 2016 2:41 pm
by TomasGould
I detail painted little more in the cockpit and gave it a wash and chipping next will be seatbelts and some dirt I'm pleased so far with the result for bieng the second aircraft ever
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 09, 2016 6:53 pm
by TomasGould
Seatbelts & dirt is done
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 10, 2016 8:45 am
by BaldyBuilderBoy
Looking good so far mate. Watching this with interest. I almost went for one of these myself,.
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 10, 2016 9:20 am
by TomasGould
BaldyBuilderBoy wrote:Looking good so far mate. Watching this with interest. I almost went for one of these myself,.
Thanks BaldyBuilderBoy I think its a great kit, but i don't have so much to compare it with lol
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 10, 2016 9:14 pm
by TomasGould
Todays work
I glued The fuselage halves and painted the engine
I also gave the engine a dark wash and a silver drybrush
Re: Eduard 1/48 Polikarpov I-16
Posted: Mon Jan 11, 2016 8:18 pm
by TomasGould
Panel done.... Check
Now time to mount everything in the fuselage
Re: Eduard 1/48 Polikarpov I-16
Posted: Tue Jan 12, 2016 10:44 am
by Nige201980
loving the look of the cockpit mate
Re: Eduard 1/48 Polikarpov I-16
Posted: Tue Jan 12, 2016 8:40 pm
by TomasGould
Nige201980 wrote:loving the look of the cockpit mate
Thanx Its my second aircraft ever so I think the cockpit turned out ok
Re: Eduard 1/48 Polikarpov I-16
Posted: Tue Jan 12, 2016 8:48 pm
by TomasGould
Today I mounted both the cockpit and wings on the fuselage
The only fitting prob was a gap on the underside between wing and fuselage But it was easy fixed with some tamiya putty
Re: Eduard 1/48 Polikarpov I-16
Posted: Tue Jan 12, 2016 8:55 pm
by shortCummins
Thomas
dry fit the engine cowling, you may need to alter the fit by either removing part bottom part of the "body" or fill (as I did) the gap between the cowling and fuselage caused because the wings don't fit back far enough
you're doing a cracking job so far, nice little kit isn't it
rgds
John(shortCummins)
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 13, 2016 5:27 pm
by TomasGould
shortCummins wrote:Thomas
dry fit the engine cowling, you may need to alter the fit by either removing part bottom part of the "body" or fill (as I did) the gap between the cowling and fuselage caused because the wings don't fit back far enough
you're doing a cracking job so far, nice little kit isn't it
rgds
John(shortCummins)
Thanks for the advice i dryfitted it and it works great
I think this is a great kit
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 13, 2016 5:28 pm
by TomasGould
Now its ready for primer
Re: Eduard 1/48 Polikarpov I-16
Posted: Wed Jan 13, 2016 9:43 pm
by TomasGould
Primed and wet sanded some small imoerfections
Tomorrow i will prime it again
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 15, 2016 11:18 pm
by patrickroos
Great work so far!
After seeing Johns and now this...got to get this kit!
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 16, 2016 2:48 pm
by TomasGould
patrickroos wrote:Great work so far!
After seeing Johns and now this...got to get this kit!
Thanks Patrick
Its a nice little kit
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 16, 2016 2:52 pm
by TomasGould
A new coat of primer and pre shading done
I also decided which markings I will use and it will be Boris Safonovs no 11
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 16, 2016 7:34 pm
by TomasGould
The basic painting is done The green is a mixture of vallejo model air 71.017 Rusdian green, 71.002 medium yellow and 71.001 white. The blue is a mixture of 71.008 Pale blue and 71.001 White
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 17, 2016 9:12 pm
by TomasGould
A clear coat and decals done today soon time for weathering
Re: Eduard 1/48 Polikarpov I-16
Posted: Tue Jan 19, 2016 9:00 pm
by TomasGould
Noticed a crack in the canopy but I've talked to eduard and they will send me a new one
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 21, 2016 9:15 am
by TomasGould
A wash done.i used artist oils (dark brown) and white spirit.
Next step will be a flat coat
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 22, 2016 11:55 pm
by TomasGould
Today a flat coat was sprayed and I masked and painted the exhaust outlets
I also did some chipping
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 23, 2016 1:00 am
by P51dplt
great detail work!
Re: Eduard 1/48 Polikarpov I-16
Posted: Sat Jan 23, 2016 3:31 am
by Sturm
Wonderful!!!!!
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 24, 2016 3:43 pm
by TomasGould
Sturm wrote:Wonderful!!!!!
P51dplt wrote: great detail work!
Thanks Guys I'm glad you liked it
I planing to build a nother one in this GB
Re: Eduard 1/48 Polikarpov I-16
Posted: Sun Jan 24, 2016 5:41 pm
by patrickroos
Looks great!
Nice paintwork and the chipping is perfect.
Looking forward to seeing the finished plane.
Re: Eduard 1/48 Polikarpov I-16
Posted: Mon Jan 25, 2016 6:56 pm
by TomasGould
patrickroos wrote:Looks great!
Nice paintwork and the chipping is perfect.
Looking forward to seeing the finished plane.
Thanks Patrick
I've now mounted the landing gear and painted and weathered the prop
Its around 15parts left to mount (9 of them is exhaust pipes)
I hope the new canopy will arrive soon
So far i think this is a great kit and couse it was so hard to choose between 2 of the 4 paint schemes I've ordered a nother kit I also will build in this GB
Re: Eduard 1/48 Polikarpov I-16
Posted: Mon Jan 25, 2016 9:00 pm
by Smiffy
Wonderful looking Polikarpov.
Re: Eduard 1/48 Polikarpov I-16
Posted: Thu Jan 28, 2016 1:54 pm
by TomasGould
Smiffy wrote:Wonderful looking Polikarpov.
Thanks Matt
I've now mounted the exhoust pipes and wires to the landing gear
I also drilled out the machinegun barrels and the venturi probe
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Jan 29, 2016 6:37 am
by TomasGould
Now is everything ready except for the canopy I'm still waiting for to arrive
Conclusion so far
Eduards I-16 is a great kit and a real joy to build
And for me that only have built one plane before this kit realy opened my eyes for aircraft kits
Re: Eduard 1/48 Polikarpov I-16
Posted: Fri Feb 05, 2016 7:14 am
by TomasGould
The postman came with the canopy yesterday....... And But I'm 600 miles from home right now....... Lol