It's Friday nights ism live at the bench what have you been working on for Friday may 19th

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?" - A NEW SEGMENT OF FRIDAY NIGHT'S ISM LIVE "AT THE BENCH" SHOW!

* Open now until 1 hour before the show on Friday, May 19th*

** PLEASE read ALL of the rules below carefully! **

Hello everyone! This post is being created to give you, as a member of ISM, the opportunity to share what you have been working on during the week on the Friday night show. Please read the rules below in order to participate.

01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.

02). Please, only post your own work and not that of others.

03). Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long.

04). Also, have only one project shown in the image per member each week. Again, this prevents prolific builders from dominating this segment and making this segment longer than it needs to be.

05). Along with your image, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).

06). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.

07). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

08). There will be a posted thread similar to this one on the ISM Forums. PLEASE post your work only in ONE of these. This will prevent us from having to sort through duplicate posts on both sites.

After the the live crew shows what they have been working on during the week, participating member's images and details will then be shown. This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[TommyKillander]

Hey Guys!

I'm working on my 1/72 Trumpeter Sea Fury FB.11 for the FAA SiG.

It's been painted with XF-21 Sky mixed with XF-2 White (ratio 3:1) and Gunze H331 Dark Sea Grey. UN-stripes have been painted aswell (XF-1 Black and XF-2 White).
I put on the decals today and my first impression where that they where crap, but they actually turned out to be good. Happy Days!



Next up is weathering


Tommy

[aur0ra145]

Howdy all!

I've just started a Tamiya 1/35 PAK35/36, L/45 Anti-Tank Gun.

That's about it. It'll be primed in Ultimate Black and I'm going to go with German Grey most likely. Hopefully it will be a fun fast build to add to the 1/35 collection. These old Tamiya crew served weapon models are a hoot. Hopefully I can find time to start the Flak 36 88mm I got the other day.

Cheers!

[Twokidsnosleep]

Hello, Happy Friday all
Will be busy with a day off, likely working outside so won't see you live, will watch on the replay

My FAA build so far. Straight out of box
Airfix 1/72nd Sea King Heliocobopter...old kit version as there is a newer Airfix update kit
Ultimate primer grey and black, Tamiya orange seats and other colours
Airwaves photo etch for the Sea King...seat belts and console
Bits of watch parts from eBay for details...knobs and such. Some other brass bits to fancy it up a bit.
There are some wires or something underneath in there too

[ElCapitan]

OK I have something this week. This is the cockpit for my Revell 1/48 Eurofighter Typhoon. Seat is painted with Tamiya acrylics - flat black, nato black and olive green for the seat, and the tub is painted with Mr Hobby grey (can't remember which number off the top of my head).

Aftermarket is the Zoom PE set from Eduard.

[Tomcat64]

My Academy 1/72 A-10A Thunderbolt II for the Warring Weather GB.

This is my first 1/72 aircraft in a while so had to get my eyes refocused and zoomed in to scale. Overall the kit has gone together reasonably well with the exception of the fuselage seams which have required some attention to get straightened out. As I prefer to display 1/72 aircraft in flight my main gripe with the kit was that there was no pilot included and the gear bay doors just don't fit when closed up. Anyway enough whining, the cockpit and pilot were painted with Vallejo, and after a little more work on the seams it'll be rescribing and priming up next.

[TinyMoore]

Just finished my Tamiya M-41 Walker Bulldog it is an old kit from 1975 but you can make it look good. I gave it a pre shading using Tamiya Nato Black and flat White then used Vallejo Model color U.S Dark Green as the base coat. Gloss coated with Aquagloss then Decals then another coat of gloss. The Tank was then given a sludge wash with earth tones excess cleaned off then dull coated with Tamiya XF-86 Flat Clear Then various washes and drybrushing to get the effect I was looking for.The Figures are also Tamiya from 1980 They look great for that age Painted using Citadel paints Kislev flesh for skin and uniforms in Castellian Green and given an Agrax Earthshade wash. Base made from Picture frame Das clay and various bits and bobs from the garden ....... More pics on Face Book also on my You Tube John Moore's Scale Models.... Thank you

[Avgas]

Got some shiny slapped onto the Freetnin'. Vallejo Metal Colour Duraluminium.

[Kingdan]

Firstly I would like to thank you all for posting regularly on here and secondly apologies for not being around on here much of late life seems to have gotten a little bit hectic, I might not comment a lot on here but I'm always popping in and out, i will start to make more of an effort as soon as possible so a big thanks from me for supporting the live crew.

Dan

[MrGav]

A Little progress on the Airfix 1/48 Hurricane mk1 this week.
Have it fully decaled up with oob decals using Micro Set & Sol then sealed in with a coat of Alclad Aquagloss ready for some weathering.

Oh I also managed to drop her nose 1st on the bench and push the point that the prop & spinner threads onto through into the fuselage, it's now rattling around in there & doing a rattlesnake impression when I pick it up...

[tommym]

Continuing with my Accurate Miniatures 1/48 Grumman TB-3 Avenger conversion to TB-1. I attached the wing halves and filled in the gunports on the wings with some styrene rod and sprue glue. Sanded it down and primed with black Stynylrez. Painted and mounted the engine using MIG Ammo Matt Aluminum and Steel , Badger Modelflex Light Gray, Ultimate Dark Dirt Wash and MIG Ammo Panel Line Wash Orange Brown. Attached the cowling and wings. I have added Scale Aircraft Conversions white metal struts and Def Model resin wheels. Painted struts and wheel bays with MIG Ammo Satin White with MIG Ammo Black and Steel accents followed by an Aqua Gloss clear coat on the wheel bays and struts only. I then added a MIG Ammo Orange Brown wash to the wheel bay and struts Wheel struts and wheels still need some detail so they have not been glued to the wings yet. I will glue them in after the plane has been painted.



Tommy

[SergioSolo]

Hi! I just finished this beauty. The detailed process will be on my channel on Sunday

Name: ZAXIS 135US Hitachi Excavator
Manufacturer: Hasegawa
Scale: 1/35
Basic process: Primed with Ultimate Black Primer, Painted with Vallejo Model Color and weathered with oils, pigments and fine sand


Pretty happy with the result!

[Stokesy44]

Mitches Models 200mm resin RAF pilot

Most of the painting is done now. With the exception of the trousers (Tamiya) I've used Vallejo Model Colour and Air. Next up are oils and washes to finish then making the radio and microphone leads. I've also painted the oxygen hose which attaches to the base of the mask, just needs a wash and dry brush to finish off.

[digger303]

Hi! I just finished this beauty. The detailed process will be on my channel on Sunday

Name: ZAXIS 135US Hitachi Excavator
Manufacturer: Hasegawa
Scale: 1/35
Basic process: Primed with Ultimate Black Primer, Painted with Vallejo Model Color and weathered with oils, pigments and fine sand


Pretty happy with the result!

wow I like this !!