Ism Friday's night live at the bench what have you been working on for *January 18th*

[Kingdan]

"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, January 18th**

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Along with your image, Remember, post only one image per member each week. This will prevent prolific builders from dominating this segment and will prevent this part of the show from becoming too long, please include the following details: The name of the kit; the company that produces the kit; any aftermarket that you have added, along with the brands and colors of paint used (if applicable).
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Lee Larholt, Paul Bretland, and the rest of the ISM moderators and live crew.

[Kingdan]

I'll kick off this week with the finished for now (till his base comes in the post) 1/10 scale hellboy bust
Primed in Ultimate black primer
Painted in lots of paint and weathered with citadel something or other


Dan likes whips

[shortCummins]

I finished this kit and display base this week, its a weekend version of Eduard’s excellent Mk.IV Spitfire, one set of markings, which I didn’t use as I used a Montex mask set, and no stencil decals.
This was my first ‘in flight’ aircraft and when I saw a photo of Rolf Arne Berg’s aircraft I just had to build one!


KIT: Eduard ‘weekend’ Spitfire Mk.IXe
PILOT: JP productions RAF pilot
MARKINGS: Montex
PAINTS: Alkan, Mr Color, Tamiya, Ultimate/Stynylrez primer, vallejo

[CaptainBigelow]

I have just finished my 1/48 Tamiya F-14A Tomcat in NSAWC Aggressor markings. Painted with MRP paints and weathered using a clay wash. Great kit to work with!

[Timplastic]

Th week has been mostly taken up building this xingbao ferrari 312T. this was designed originally by RoscoPC.He is well worth looking up on the web as he has built many of these cars and the MOC instructions for them all can be purchased. All it needs now is the stickers added. Im holding off untill I order the correct ones

[mountaineermodeler]

Been working this week on a Friday Night Live Prize. Got started as soon as the 1/35th Asuka Firefly arrived. So far it lives up to what everyone has been saying. It is a very good kit. Lots of detail. The PE is not as difficult as I expected. Doesn't look like it from this angle but there is a lot of work done here. A ton of small parts on the rear and in the suspension parts. Thanks again guys and especially Frey at Model Emporium.

[F27pax]

Here at last is the completed Eastern Express 1/144 Fokker 50 adorned in Skywest livery with decals from Southern Sky Decals. Both the kit and the decal sheet fought me every inch of the way on this one and I think it might be a points decision to the kit. My new laser printer got a good workout on this one resizing some of the decals which were then printed on white decal sheet. Apparently the decals were designed for the Welsh Models Fokker 50 kit rather than the Eastern Express one and had to be resized about 15 per cent smaller to fit on this kit. The main colour all over is Tamiya Pure White over Tamiya White Primer.

[Maverick231]

Evening fellow plastic cutters!
This week I've been carrying on with the 1/72 Fujimi MiG-29A Fulcrum which my Dad has asked me to build for him.
He thinks he's paying me for it but has no idea it's a birthday present! SURPRISE!!!!!
The paint work is Vallejo Model Air:
71.289 US Dark Green
71.016 USAF Olive Drab
71.023 Hemp
71.274 Aggressor Grey
71.109 Faded P.R.U. Blue
71.053 Dark Sea Gray
71.057 Black
71.063 Silver
I used bluetac to mask the camo and it's turned out ok which is surprising as I've not tried this before and I like doing it as it allows you to use really cheap rubbish masking tape and still have a good effect.

Have a great show guys!

[Black73Cat]

Finished the Hobby Boss King Tiger 1/35.

Really enjoyed this lengthy build! Excellent kit for the money with nice detail and no fit issues at all.

Primed with Ultimate Oxide Primer
Base coated with Tamiya XF-60 and camo from Rotbraun and Dunkelgrun Mr Hobby Aqueous.

Assorted washes and pigments and oils from MiG and AK.

It's been a learning experience from start to finish...

[warpedcrisis]

Revell '67 Chevelle Pro Street 1:25
Ultimate grey primer , Vallejo air flat black, Ak extreme aluminium and Alclad 2 chrome
Built out of the box with the exception of some wiring.
Winsor and Newton matt varnish

[NormanD]

1/32 Revell Westland Lynx Mk.8

This is the new release of Revells 1/32 Lynx Helicopter, real good value for money kit, no issues other than seam line clean up on some parts, started this on Monday and it builds quickly, going to push through with this one as I already have the paints for it.

I still refuse to endorse any Ultimate products within my pictures.

[BrianI]

The Moebius "Batman" Original TV Series Catwoman

[effikovec]

Hello there!
As Paul said there is no excuse not to post on this new lovely forum so hre i go!
Now i present you my first build of 2019!
Its 1/72nd P-47D Thunderbolt "Bubbletop" from Tamiya with eduards PE set for "Razorback" version (there is just 4 more pieces in Bubbletop´s difference so no biggie).
I was amazed by the kits detail as it was my first Tamiya plane, build was so smooth i used close to no putty at all! But the hardest part for me that i prepared for myself was nosecone checkerboard pattern that i had masked and aibrushed and had to do it twice as i sneezed and spilled some paint right on it but i was able to redeem it!
Primed in AmmoMIg one shot primer black, Painted with MR Metal colour Aluminium, chrome silver and Mr Colour Interior green, Tamiya XF-1 and 2 and AmmoMIg dark olive drab sealed with X-22, panelined with AmmoMIg Blueblack paneliner and sealed with Vallejoh matt Varnish.
20190118_175255 by Radim Effenberger, on Flickr

[Novorus]

Well this week Mathew, work has been slowed but got a little time to play with my Huey.

Seat belts made from Aizu tape and PE buckles set and added for detail as the old bird will be a wreck. Body base coated in Ultimate black primer,Olive Ultimate primer and then finished with Model Color 975 Military Green. (Best match using the modeller toolkit on the forum) .

Instrument panel Ultimate primer black, dry brush model color 986 Deck tan and then a few water colour pencils used to create interest with a final touch of Tamiya X22 Clear.

Loads still to do but happy with the base of it, Sorry Dan about the length of this but sometimes just got to strap yourself on and crack on......!

[Paul]

Progress on the Aoshima Lamborghini Aventador. Primed in Ultimate primer. Base painted in Mr color C305 grey and then Pro range 2k cleared today all through the Ultimate Apex

[onemac]

It's my model and the rivet counters can go jump.......

I'm calling it done on the 1/72 Hasegawa (no Dan, that's not how you pronounce it ) F-15E Strike Eagle. Primed in Ultimate Grey Primer and sanded to hell and back with Ultimate sanders/buffers. MRP-040 Dark Grey all over with Accurate Decals aftermarket to depict a Lakenheath bird - note to all that Accurate Decals is a misnomer! Clear coated with Aqua Gloss and weathered with Ultimate Dark Dirt wash and Abteilung 502 oils and finished off with Testors Dullcote.

The End (thanks for looking).

18_01_2019_F-15E_Final by Alan MacNeish, on Flickr

[TotallyScaleModels]

Good evening gents.
I have started drilling out all the holes for the fibre optics to go in. Its the Revell 1:2700 Imperial Star Destroyer.
I have done a couple of hundred so far and got a few more hundred to go. Its slow going and at times soul destrying but will be worth it in the end (i hope). Going to be hiding in the shed from the outlaw this weekend so hope to get a lot done. Have a great weekend.