Global Scale Modeller

So it turns out this is what I have started for 2020...ignore the Ferrari box


It is a $12 ebay find and I couldn’t resist the poor girl. Plan is to build it as a street car like so:


It is pretty rough condition


Cleaned it up with Ultimate airbrush cleaner, RH seat is much nicer now.




Testing some wheels out on the trailer










I have torn everything apart that I can, wiped it all down, stripped all the chrome and have the engine block painted blue, sanded off body seams and filled defects.


This is a big job and there are parts to be found and scratch built

This is very cool, looks to be quite a challenge!

I've tried scratchbuilding parts before and I'm absolute crap at it. But I can't wait to see yours Scott

KalebB wrote: Mon Jan 13, 2020 4:13 am This is very cool, looks to be quite a challenge!

I've tried scratchbuilding parts before and I'm absolute crap at it. But I can't wait to see yours Scott

Don’t ever do this
Only a complete idiot feels bad for a badly built kit, pays twice as much for shipping than the auction, buys a car contact cemented together and one missing vital parts.
Stupid stupid stupid

Ya it will be fun

Twokidsnosleep wrote: Mon Jan 13, 2020 4:22 am

KalebB wrote: Mon Jan 13, 2020 4:13 am This is very cool, looks to be quite a challenge!

I've tried scratchbuilding parts before and I'm absolute crap at it. But I can't wait to see yours Scott

Don’t ever do this
Only a complete idiot feels bad for a badly built kit, pays twice as much for shipping than the auction, buys a car contact cemented together and one missing vital parts.
Stupid stupid stupid

Ya it will be fun

I mean, it could be worse
The cars shell could been bent or covered in cement haha

KalebB wrote: Mon Jan 13, 2020 5:14 am

Twokidsnosleep wrote: Mon Jan 13, 2020 4:22 am

KalebB wrote: Mon Jan 13, 2020 4:13 am This is very cool, looks to be quite a challenge!

I've tried scratchbuilding parts before and I'm absolute crap at it. But I can't wait to see yours Scott

Don’t ever do this
Only a complete idiot feels bad for a badly built kit, pays twice as much for shipping than the auction, buys a car contact cemented together and one missing vital parts.
Stupid stupid stupid

Ya it will be fun

I mean, it could be worse
The cars shell could been bent or covered in cement haha

Very true, the body still has her lovely shape
The plastic feels old and brittle....kinda like me

I ordered the proper era wheels and tires for her last night.
Hallebrand knock off mags


She looks pretty cool black on black...maybe

I have a snow day today, so after the dog has her playtime in the snow and the walks are shovelled I am gonna tuck into this project!

Have fun with it and enjoy yourself. Its a beut of a car and will just look right whatever way you do her. I built the MFH one a few years back now still have it in my display cabinate

Hawkmoon wrote: Mon Jan 13, 2020 7:25 pm Have fun with it and enjoy yourself. Its a beut of a car and will just look right whatever way you do her. I built the MFH one a few years back now still have it in my display cabinate

Oh yeah, I have been drooling over the MFH website picking up detail pics of their Cobras
Thanks, she will be a nice clean/ tame street car when done

Trying on some Borrani wire wheels


Oil painting some leather seats. Ultimate Gelb and then W&N burnt umber, then I rubbed some away

Those seats looks darn good. Exactly as I'd image worn ish leather to look like

Nice one, Scott. Saw this over at MCM Forum. Great choice on the wheels & I definitely vote for the black on black

Pete75 wrote: Tue Jan 14, 2020 6:48 am Nice one, Scott. Saw this over at MCM Forum. Great choice on the wheels & I definitely vote for the black on black

Yes, those guys know their domestic cars for sure
I don't post much over there, but when it comes to a hot rods and the like there are some good tips and resources

Looks like you are trying to make one of the old model muscle cars

jmurphy18 wrote: Wed Jan 15, 2020 2:31 pm Looks like you are trying to make one of the old model muscle cars

Yes, yes I am


Classy with some leather interior trim

Lovely look with that leather trim, are you planning on painting it in that particular shade of blue like in the reference photo?

Oooo nice I see plenty of scratch building potential here

KalebB wrote: Wed Jan 15, 2020 6:41 pm Lovely look with that leather trim, are you planning on painting it in that particular shade of blue like in the reference photo?

Yes if I can get close

Kingdan wrote: Wed Jan 15, 2020 7:19 pm Oooo nice I see plenty of scratch building potential here

And more to come, she is missing parts

Twokidsnosleep wrote: Wed Jan 15, 2020 4:34 pm

jmurphy18 wrote: Wed Jan 15, 2020 2:31 pm Looks like you are trying to make one of the old model muscle cars

Yes, yes I am


Classy with some leather interior trim

Scott
Watch the Barrett - Jackson Action (this week) there are a few of these AC Cobra's there at the action. Even kit cars. On tonight through Sunday. Can you tell what I have been watching at night ROTFL

Very cool on what you are trying to build here!!

I had a bud in the service the had one of these with the 427.... That darn car would fly! It was scary as you know what.

HAGD & Week

The correct name for the Blue paint is 'Guardsman Blue' Zero paints have it but you may need to find an alternative over there from Splash/ etc

https://www.hiroboy.com/Cobra_Guardsman ... --906.html

I used it on mine and its top notch-

P4050122 by andrew purchase, on Flickr

Hawkmoon wrote: Thu Jan 16, 2020 4:48 pm The correct name for the Blue paint is 'Guardsman Blue' Zero paints have it but you may need to find an alternative over there from Splash/ etc

https://www.hiroboy.com/Cobra_Guardsman ... --906.html

I used it on mine and its top notch-

P4050122 by andrew purchase, on Flickr

That is great!
Wow

That looks cool!! Nice work hawk moon.

I have got a lot painted today, mostly in Ultimate black and Tamiya LP paints
Cylinder heads, frame, cockpit underside, Webber carbs, oil pan and transmission. Just went mad with the airbrush
Just letting everything cure up, will get some photos tomorrow in better light.

Here we go

Dude! Those Webbers and the frame work looks great. The brown and the dark on the seats and trunk are look awesome Excellent work! I saw a couple go at Barrett - Jackson yesterday for over $100K . Keep up the good work

jmurphy18 wrote: Sat Jan 18, 2020 5:15 pm Dude! Those Webbers and the frame work looks great. The brown and the dark on the seats and trunk are look awesome Excellent work! I saw a couple go at Barrett - Jackson yesterday for over $100K . Keep up the good work

Ya cool, they can command a fair $
One thing I don’t like about doing glue bombs is that things are not always crisp. The plastic has been mangled, glue deposits warp areas and leave others ‘mucky’. I gotta stop doing these and just build new kits

Look at those shiny trumpets on that engine

Looking good bud

KalebB wrote: Sat Jan 18, 2020 5:40 pm Look at those shiny trumpets on that engine

Looking good bud

The Malatov chrome pen didn’t make them as chromy as I would have liked

Twokidsnosleep wrote: Sat Jan 18, 2020 5:54 pm

KalebB wrote: Sat Jan 18, 2020 5:40 pm Look at those shiny trumpets on that engine

Looking good bud

The Malatov chrome pen didn’t make them as chromy as I would have liked

"And we shall ride on the highway to Valhalla, Shiny and Chrome"

Coming together nicely and looking good

Got the engine wired and the fuel line added
It is a bit sloppy and I didn’t get the wires out of the distributor in proper order...but it won’t start and don’t care

looks great.

Is that a 'Shelby' Cobra by the guy played by Matt Damon in the movie? Have you seen it, its an awesome movie.

How have I missed this looking real good Scott just loving them seats and engine weathering

Twokidsnosleep wrote: Sun Jan 19, 2020 6:48 am Got the engine wired and the fuel line added
It is a bit sloppy and I didn’t get the wires out of the distributor in proper order...but it won’t start and don’t care

Excellent works Scott !!
LOL what did you do wire it as a SB Chevy????? 1-8-4-3-6-5-7-2. VS SB Ford 1-5-4-2-6-3-7-8

Stokesy44 wrote: Sun Jan 19, 2020 8:22 am looks great.

Is that a 'Shelby' Cobra by the guy played by Matt Damon in the movie? Have you seen it, its an awesome movie.

I can answer this one for you. The "Ford vs Ferrari" movie with Matt Damon, the car is they race for Ford is the Legendary GT-40. Ford won LeMans in 66, 67, 68, 69 with the GT-40 before the car was ban. Scott is building an AC-Cobra. Intreating note that came out last night at the Barrett - Jackson action the guy that designed the AC-Cobra body. for the English company got $5 pre body. Talk about shot end of the stick :

jmurphy18 wrote: Sun Jan 19, 2020 4:11 pm

Stokesy44 wrote: Sun Jan 19, 2020 8:22 am looks great.

Is that a 'Shelby' Cobra by the guy played by Matt Damon in the movie? Have you seen it, its an awesome movie.

I can answer this one for you. The "Ford vs Ferrari" movie with Matt Damon, the car is they race for Ford is the Legendary GT-40. Ford won LeMans in 66, 67, 68, 69 with the GT-40 before the car was ban. Scott is building an AC-Cobra. Intreating note that came out last night at the Barrett - Jackson action the guy that designed the AC-Cobra body. for the English company got $5 pre body. Talk about shot end of the stick :

Yes a A/C Cobra...early civilized years

jmurphy18 wrote: Sun Jan 19, 2020 4:01 pm

Twokidsnosleep wrote: Sun Jan 19, 2020 6:48 am Got the engine wired and the fuel line added
It is a bit sloppy and I didn’t get the wires out of the distributor in proper order...but it won’t start and don’t care

Excellent works Scott !!
LOL what did you do wire it as a SB Chevy????? 1-8-4-3-6-5-7-2. VS SB Ford 1-5-4-2-6-3-7-8

I did the wires symmetrically coming out of the distributor . Not sure what I was thinking, but wanted nice even length leads.
I already had to make two distributors as the first one only got spacing enough for seven holes
So we are getting symmetrical leads, period.

You must have borrowed my "Murphy's law" . HAGD and just have an beverage and motor on

Got another set of wheels





I like the wire spokes better

Been following along... I can't believe your taking on a car that was a bit of a "hot mess" already. I do enough to sabotage myself without trying to right someone else's wrong.

Bravo to you for saving this little gem (which I'm sue it will be when your done with it) and giving it a life.

fwiw, I like the "other" wheels.

barryf1fan wrote: Tue Jan 21, 2020 8:13 pm Been following along... I can't believe your taking on a car that was a bit of a "hot mess" already. I do enough to sabotage myself without trying to right someone else's wrong.

Bravo to you for saving this little gem (which I'm sue it will be when your done with it) and giving it a life.

fwiw, I like the "other" wheels.

Oh yeah the Halibrands look good on her too

Kevthemodeller wrote: Sun Jan 19, 2020 9:37 am How have I missed this looking real good Scott just loving them seats and engine weathering

Kev, thanks for looking at me mess

I like the spoke wheels a ton on that car. Build is looking good bud

She was a glue bomb diamond in the rough and you're bringing it back

KalebB wrote: Wed Jan 22, 2020 2:29 am I like the spoke wheels a ton on that car. Build is looking good bud

She was a glue bomb diamond in the rough and you're bringing it back

Thanks man
Itching to get going on the paint
Have a long work week to get through and a short weekend though

At this stage, we go a little crazy and sideways.
I have no kit steering wheel. So I ordered a PE aftermarket one


It comes with a rubber o ring The real wheel is a wooden steering wheel
So I think I will laser cut out some thin veneer wood for a wheel



I don’t have the laser dialled in right and can’t get through. The veneer wood chips like crazy when I cut it. So I glue up two bits in different grain direction and put them on a Dremel ‘lathe’









I also took a copper wire, bent it round and filled soldered the end...the copper wheel is a back up plan



So not a perfect prototype, but with a different wood, this will work

Nicely done and looking good

Excellent work Scott, just caught up with this and it's a pleasure to watch you work

It was probably the thickness of material you were trying to burn through not that you didn't have it adjusted right. 3000mv will cut about a 1mm. I tried to find where you posted your laser cutter when you acquired it and couldn't find it. Mind you I gave up after going back about 20 pages. I thought it was in the goodies bought page. I actually thought yours was a 400mv, but I couldn't confirm it. Any way could you put a bigger laser on it ? When I was having a look around via google I came across a hybrid machine that has a laser and a cnc milling unit. It would seem to offer more possibilities.

AAC wrote: Sat Jan 25, 2020 11:37 pm Excellent work Scott, just caught up with this and it's a pleasure to watch you work

Cheers ALEX
Very kind words indeed, I am humbled

digger303 wrote: Sun Jan 26, 2020 12:14 am It was probably the thickness of material you were trying to burn through not that you didn't have it adjusted right. 3000mv will cut about a 1mm. I tried to find where you posted your laser cutter when you acquired it and couldn't find it. Mind you I gave up after going back about 20 pages. I thought it was in the goodies bought page. I actually thought yours was a 400mv, but I couldn't confirm it. Any way could you put a bigger laser on it ? When I was having a look around via google I came across a hybrid machine that has a laser and a cnc milling unit. It would seem to offer more possibilities.

Hybrid would be cool...cnc AND laser
This is a 4W laser and Matthew has cut 1/2 mm plywood with it, ‘cause it use to be his!!
It is all in the settings, speed, # of passes and not having an idiot at the controls .
Guess I am screwed

Twokidsnosleep wrote: Sun Jan 26, 2020 12:24 am

digger303 wrote: Sun Jan 26, 2020 12:14 am It was probably the thickness of material you were trying to burn through not that you didn't have it adjusted right. 3000mv will cut about a 1mm. I tried to find where you posted your laser cutter when you acquired it and couldn't find it. Mind you I gave up after going back about 20 pages. I thought it was in the goodies bought page. I actually thought yours was a 400mv, but I couldn't confirm it. Any way could you put a bigger laser on it ? When I was having a look around via google I came across a hybrid machine that has a laser and a cnc milling unit. It would seem to offer more possibilities.

Hybrid would be cool...cnc AND laser
This is a 4W laser and Matthew has cut 1/2 mm plywood with it, ‘cause it use to be his!!
It is all in the settings, speed, # of passes and not having an idiot at the controls .
Guess I am screwed

have you tried a small fan to blow the smoke away while it's cutting ?
Will it cut styrene cleanly ? .... thinking of Minart and their composite wheels.

hybrid machine...500mv up to 5500mv
https://www.ebay.com.au/itm/3-Axis-CNC- ... 0005.m1851

So prototype W1 wheel finished stained and detail painted.





Not bad but room for improvement