Ism Friday's night live at the bench what have you been working on for *June 5th*

General Modelling discusion that doesn't fit into any of the other sections
Post Reply
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by Kingdan »

Image
"WHAT HAVE YOU BEEN WORKING ON THIS WEEK?”
**Open now until 1 hour before the show on Friday, June 5th**

To Claim Your Prize please email ismprizeclaim@gmail.com with your You tube name, real name and full postal address

Please read the rules below in order to participate.
01). By participating in this thread, you are giving permission for the ISM live crew to share your work during the Youtube broadcast of the ISM Live "At the Bench" Friday show.
02). Please, only post your own work and not that of others.
03). Please only post one picture, along with short description of the basic work done, no need for War and Peace
04). The deadline for entries each week will be between the time the post goes up until an hour before Friday's show. Entries made after the deadline will not be shown.
05). Remember: If you wish to have a project highlighted during the show, the image and information must be shared in this thread, not a separate post on the Facebook page!

This is an opportunity for you as members to be directly involved with the show. We hope that you will participate no matter your level of experience. This will not be a critique of anyone's work.

We thank you in advance for allowing us the opportunity to showcase your models! - Paul Bretland.
OneSmallStep1966
Command Sergeant Major
Command Sergeant Major
Posts: 935
Joined: Wed Nov 18, 2015 2:37 pm
Location: Herne Bay, Kent (UK)
England

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by OneSmallStep1966 »

I finished my Industria Mechanika 1/35 Manchu’s Steam Car.

Tamiya LP and Mr Metal Color paints were used for the car, Vallejo Model Color for the figures and various acrylics with Ultimate Washes for the base (a Miniart street dio) mounted on Cherry wood.

A really enjoyable kit to build/paint and I’ve titled it "Hey Fred, I think we're lost...”.

Image
Hawkmoon
Chief Warrant Officer 3
Chief Warrant Officer 3
Posts: 2121
Joined: Fri Mar 01, 2019 7:19 pm
England

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by Hawkmoon »

Tamiya 1:12 Ducati 1199 Panigale S - Tricolore

Nice kit that built well and not a bad result for my first 1/12 bike kit. Hobby design and Tamiya front fork upgrades used.

Zero paints Ducati red and brilliant white used along with Zero 2K other paints used Tamiya LP's/acrylics and some Vallejo.

ImageP6017758 by andrew purchase, on Flickr
User avatar
Gary30
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1125
Joined: Tue Jan 30, 2018 3:10 pm
Wales

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by Gary30 »

Just finished my Revell Ford GT 2017 LM, tricky paint job, and fiddly assembly, but it turned out ok in the end.

I used Tamiya LP's and Pro-Range 2K. Have a good weekend everyone :cheers2:

Image
Portfolio
Click here
F27pax
Sergeant
Sergeant
Posts: 136
Joined: Mon Jun 18, 2018 2:52 pm
Australia

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by F27pax »

Good evening happy modellers (whether you’re happy or not).

This evening here is progress on the 1/72 Azur Dewoitine 376. All it needs now is a coat of silver lacquer, decaling and final assembly and it will be finished. This is a lovely little kit but attaching the fuselage to the wings is a trial by ordeal achieved only with generous helpings of harsh language.

Image
User avatar
barryf1fan
Sergeant Major of the Army
Sergeant Major of the Army
Posts: 1183
Joined: Thu Jul 19, 2018 8:41 pm
Location: Prev OK, now St. Cloud, FL
United States of America

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by barryf1fan »

Tamiya 1/12 Ducati Panigale Tricolore
Going a different route than the box scheme.
Tamiya paints, no detail-up sets
Some SMS carbon fiber
Definitely a WIP. :lol:

Image
All of us get lost in the darkness, Dreamers learn to steer by the stars,
All of us do time in the gutter, Dreamers turn to look at the cars.

On the Bench: Fujimi Porsche 911 GT3 x2 - Flying Lizard 2011 GT3 cars, #80 & #81
Up Next: 1/20 Tamiya McLaren MP4/5 F1
User avatar
Kingdan
Warrant Officer
Warrant Officer
Posts: 1407
Joined: Thu Jun 05, 2014 11:42 pm
Location: Sutton in Ashfield nr Mansfield Nottinghamshire
Contact:
England

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by Kingdan »

It's a roll over folks post away 👍🏻👍🏻👍🏻
User avatar
onemac
Sergeant First Class
Sergeant First Class
Posts: 317
Joined: Sun May 15, 2016 6:24 pm
Location: Lossiemouth, UK
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by onemac »

Airfix 1/72 Buccaneer S 2C......... 180+ decals on (a very prominent one in the wrong place :shock: )

Image
Currently on the bench:

1/32 Tamiya F-15E Strike Eagle
1/48 GWH T-33 Shooting Star
1/48 Revell (Monogram) F-15C Eagle
User avatar
RangerNeil
Major
Major
Posts: 4745
Joined: Fri Jul 12, 2019 9:42 pm
Location: Dagenham
Contact:
Great Britain

Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

Post by RangerNeil »

Carrying on with finishing the OT-90 conversion I started years ago... Very fiddly rear door hinges - as they seem to be as reliable as the track links in staying where they are meant to be I will be assembling the doors in the closed position as there is no interior to view. I originally planned on scratch-building the rear spine and sets but for some reason I have long since forgotten now I stuck the hull top on..

Image
    Neil (yet another one...)

    On the board now:

    Airfix 1/35 Alvis Stalwart Mk2 FV622
    Hasegawa 1/48 A8 Crusader

    Scalemates stash info
    =58417&fkSTASHSTATUS[]=58417-Stash&page=stash]Scalemates Stash manager
    User avatar
    Twokidsnosleep
    General
    General
    Posts: 18481
    Joined: Thu Aug 07, 2014 4:07 pm
    Location: BC,Canada
    Canada

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Twokidsnosleep »

    Hello Lords and Lasses of ISM fame, Happy Friday :cheers2:
    This is a WIP Tamiya 1/12 Ducati Panigale S 1199 just a great kit
    Hey, there are lots of Tamiya Ducatis being built for the informal Duck group build on the forum

    Mine is a yellow white factory scheme
    Tamiya XF-3 yellow + X-26 clear orange to make an orange/yellow “ CAT” colour. White is decanted TS -26 pure white
    Blacks are mostly Ultimate gloss black primer
    Fairings are magnetically attached and removable
    I am building slowly as we are back to work and busy again after the shutdown so much less modelling time :(

    Image


    Have a good weekend :D
    Scott

    On, Under or near the desk
    Mr Tamiya Memorial build...Alfa Romeo Bt-46
    Tankboy76
    Corporal
    Corporal
    Posts: 60
    Joined: Thu Apr 25, 2019 6:37 am
    Location: Crystal, MN, USA
    United States of America

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Tankboy76 »

    This is Tamiya's 1/24 1982 Celica Supra made up as the Marshall's car for the Long Beach Grand Prix. I'm almost done - finishing the corner glass and wheel arches. A very basic kit on pretty old tooling (1981 copyright marks on the chassis) it nonetheless went together pretty well. I think the combo of TS-86 Pure Red and the yellow/orange decals is pretty striking. The headlights can be flipped up and down, but take your time building, as the mechanism needs careful alignment and fitting if you want them to move smoothly (like mine don't).

    Image
    User avatar
    ElCapitan
    Chief Warrant Officer 2
    Chief Warrant Officer 2
    Posts: 1725
    Joined: Sun Aug 14, 2016 10:59 pm
    Location: Glasgow
    Scotland

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by ElCapitan »

    I previously tried to sell this kit but nobody wanted it. May as well build it then...

    It's a Mirror Models 1/35 CMP C15A truck. The kit comes with a ton of PE and a few resin parts, and the instructions are just a bunch of photographs of each step - no easy to follow assembly diagrams here! So far it's been the fiddliest kit I've ever built, and judging from the fact I've still got about 75% of the PE parts to use, it's only going to get worse! No wonder nobody wanted to buy it :think:

    Here's the completed chassis:

    Image
    Rob
    ElCapitan
    User avatar
    LWWales
    First Sergeant
    First Sergeant
    Posts: 528
    Joined: Tue Apr 21, 2020 9:24 pm
    Wales

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by LWWales »

    Kingdan wrote: Tue Jun 09, 2020 7:11 pm It's a roll over folks post away 👍🏻👍🏻👍🏻
    Quick one, Dan. I commented on the Facebook post. Can I remove that and post another? I've progressed quite a bit with the build.

    Also, everyone else, some great models! :thumb1:
    Previously on the bench: Tamiya 1/20 McLaren MP4/4 - Top Studio super detail set.

    Current build: Tamiya 1/12 Honda VF750R & Hobby Design set
    User avatar
    Paul
    Site Admin
    Site Admin
    Posts: 12622
    Joined: Thu May 23, 2013 4:47 pm
    Location: Merseyside, England, UK
    Contact:
    England

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Paul »

    Tamiya 1/48 M1A2 Abrams

    Another one of the bench, love these 1/48 Armour kits from Tamiya. My first ever Desert Camo and i'm happy how it came out. there's a few things I'll alter after seeing the pics in editing and im open any comments or critique :)

    * Tamiya 1/48 M1A2 Abrams
    * Primed in Ultimate Black Primer
    * Base painted in Tamiya LP-30
    * Paint high and low lights done using lighter and darker tones of the base colour
    * Raw umber pin washed
    * Oil dot filtered with Winsor & Newton oils
    * Chiping done with Ak gunmetal via brush and sponge and * Graphite pencil
    * Sand and Light Dirt Ultimate Clay washes used on tracks and lower surfaces
    * All paints and Ultimate wash sprayed through the Ultimate Apex Airbrush

    Image
    User avatar
    Tomcat64
    Brigadier General
    Brigadier General
    Posts: 7188
    Joined: Thu Sep 22, 2016 3:24 pm
    Location: Swindon, UK
    England

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Tomcat64 »

    Evening young Dan. Bit of a mixed bag from me this week as I appear to have three projects on the go at the moment.
    • On the left are the chassis & main gun from a Miniart 1/35 SU-76 - this kit hasn't been great but is slowly coming together and currently working on the individual track links
    • Top right is a Italeri 1/72 Opel Blitz with additional resin cargo from ModelTrans. This has gone together pretty well so far considering the age of the original moulds (1974) just needs the cab adding before weathering.
    • Bottom right is one of the modules for the MPC 1/96 Eagle Transporter from Space 1999. Another kit which has its origins in the early 70s but is going together well so far with a little sanding and TLC.
    Image
    Cheers, Neil

    On the Bench:
    Revell 1/72 Millennium Falcon - stalled due to stupidity
    Tamiya 1/35 Stegosaurus Stenops
    Tamiya 1/35 Sherman Firefly VC
    Hawkmoon
    Chief Warrant Officer 3
    Chief Warrant Officer 3
    Posts: 2121
    Joined: Fri Mar 01, 2019 7:19 pm
    England

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Hawkmoon »

    Wingnut Wings the 'Duelists' Felixstowe [early] and Hansa-Brandenburg

    Work continues on the Felix with the central wing/engine assembly complete and starting to come alive now the rigging is also being added.

    ImageP6097841 by andrew purchase, on Flickr
    User avatar
    Novorus
    Master Sergeant
    Master Sergeant
    Posts: 401
    Joined: Mon Jul 06, 2015 5:03 pm
    Location: Hertfordshire
    Great Britain

    Re: Ism Friday's night live at the bench what have you been working on for *June 5th*

    Post by Novorus »

    Good evening all hope everyone are well.

    Thought i would share my last kit completed, that being the Tamiya 1/48 US 2 1/2 Ton-6x6 cargo truck.
    Primed in Ultimate black and then Model Color paints, rear bed canvas is made from toilet paper (unused). It was all sealed with Winsor and Newton Gloss or matt vanishes through the different stages. With a little oil pin wash.

    Hope you like it.

    Image
    James
    https://www.youtube.com/channel/UCZnEdt ... s3LTfQW4Eg Remember like, share and subscribe
    Remember the 20th March 2020 is the Model Officer Mess birthday bash, come and join in."Fokker's Foe's"
    https://www.facebook.com/groups/217021638777483/
    Post Reply

    Return to “Modelling Chat”