Global Scale Modeller

This seems an appropriate intro for what is to follow - as well as introducing the build subject itself....



And now the kit...



Its Doyusha's version of the Gerry Andeson submarine "Stingray" from the 1960's TV series of that name (not to be confused with the Corvette of the same name!). The unboxing - bear with me on this - first time I've tried filming myself work:



There isn't actually an awful lot to this kit - three sprues plus clear sprue plus electrics plus decals plus instructions:

Upper Hull


Lower Hull


Parts and Glazing


Electrical bits


Wiring diagram


Instructions




As you can see - the first hurdle is the fact all the instructions are in Japanese - a language I know absolutely zero about.!! So hopefully Google Translate will be a bosom buddy here. :lol
The plan is to modify the rather basic and barren interior to look a bit more like the submarine in the series. maybes wapping the LED's for fibre optics. We shall see.
Second hurdle is there are NO paint instructions at all so it will be suck it and see colour-wise as we go.

Awesome!!!!
PREPARE FOR ACTION!

What a great choice, never seen this before at all, little before my time
Lights and all, very cool Can it go into water as well??

2 minutes of video where there was no cutting yourself, no paper cuts and no swear words...pretty good
Happy to have you along in the sig

Came pretty close on the cutting myself front...
Lesson learnt from this is find a better way to do filming than holding phone on in one hand whilst wielding a rather sharp knife the other!!

RangerNeil wrote: Sun Jun 06, 2021 11:06 pm Came pretty close on the cutting myself front...
Lesson learnt from this is find a better way to do filming than holding phone on in one hand whilst wielding a rather sharp knife the other!!

I messed up and swore on my first ever video...bomber sig I think
I kept it on my channel just to laugh at

We didn't get these puppet action shows in Canada
This one looks like the same guys as Thunderbirds?
As a kid in the 60's these would have been super cool..but not for Canada apparently

Twokidsnosleep wrote: Mon Jun 07, 2021 12:04 am

RangerNeil wrote: Sun Jun 06, 2021 11:06 pm Came pretty close on the cutting myself front...
Lesson learnt from this is find a better way to do filming than holding phone on in one hand whilst wielding a rather sharp knife the other!!

I messed up and swore on my first ever video...bomber sig I think
I kept it on my channel just to laugh at

We didn't get these puppet action shows in Canada
This one looks like the same guys as Thunderbirds?
As a kid in the 60's these would have been super cool..but not for Canada apparently

Yep - this was the one before "Thunderbirds". All creations of the late, great, Gerry Anderson and his "Super Marionation". I wanted to get hold of a kit of Thunderbird 2 as that was my favourite - but all the available ones were ridiculously small scale. A lesson learnt from the Tu-160 build is that I am getting too old to drop below 1/72.
The other kit I have that might appear in this build depending on the great upheaval is a 1/48 Eagle Transporter from the series "Space: 1999" - also one of Gerry Andersons creations but this one was with live actors.

Brilliant! Loved Stingray (actually I think I have the complete series on DVD buried at the back of a cupboard somewhere)

Really looking forward to seeing this come together

oh yes this was one of my favorite programmes as a kid, "againthing can happen in the next half hour" love it

Update time.... Before cutting plastic I thought it might be a good idea to workout what the paint colours are. I found some still photos on Pinterest of the original Stingray and used an app on my phone to get a comparison. Results are:
Dark Blue (upper hull)
Tamiya PS-4 Blue Flat or AKAN 98109 Lufthansa Ultramarine Blue

Light Blue (mid-hull)
Hataka A320 Medium Sea Blue or AKAN 731164 Light Blue for SU-33

Silver Grey (lower hull)
AK Air Series 2173 Silver Grey or Vallejo Game Colour 72048 Ghost Grey Matt

Yellow (trim)
Hataka A105 Lumious Yellow RAL 1026

White (Trim)
Humbrol 022 White Gloss or Humbrol 130 White Satin

Interior Red
Vallejo Model Air Orange Matt or Real Colors AIR RC207 Luminous Orange

Light Grey (Roof)
AKAN 63008 Blus - Mig 21/23/25 or Abteilung ABT 255 Paynes Grey

Grey (floor)
RedLine/Hataka A)711 Blue Grey or AKA 72066 Ocean Grey

Grey Green (consoles)
Vallejo Model Air 71342 Russian AF Light Blue or AK Air Series 2154 Light Blue Satin

Dark Grey (consoles)
AKAN 73192 Grey Cammo Spots or Hataka A037 Light Ghost Grey

Dark Grey (seats)
Mr Color C370 Axure Blue

So - some paint ordering to do.. I have to say the white choices do not give me good feelings after the Gazelle build

Loved Stingray but Captain Scarlet was my thing at the time and Joe 90 of course

Hope we see the 1/48 Eagle Transporter make an appearance Neil
I still have my 70,s space 1999 annuals

Casper wrote: Tue Jun 15, 2021 7:47 pm Loved Stingray but Captain Scarlet was my thing at the time and Joe 90 of course

The penalities of youth!!! That means you also missed Fireball XL5 and Supercar!!

Casper wrote: Tue Jun 15, 2021 7:51 pm Hope we see the 1/48 Eagle Transporter make an appearance Neil
I still have my 70,s space 1999 annuals

If the great upheaval is completed I will also make a start on the Eagle. Got some ideas there - diorama etc. but there are too many small parts to risk losing in the move process.

Now - back to Stingray, I have it in mind to scratch build an interior - que cries of"crazy", "insane" etc all of which would be accurate. I've got a week off work due to a dirty great hole in my ankle that won't heal and is a tad painful and today was the first time I've felt like getting the plastic out. The crew cabin is an enclosed module - top is the glazing, bottom is a semi solid floor. This is the floor:



Note the various holes. The biggie in the centre appears to be to allow turning the periscope to work the dive planes. The one in front of it is for a dome cover over the interior lighting - quite why you would want to illuminate a barren space is beyond me. The scallop on the side - I cannot find a logical reason for - but might find a use for in a revised lighting scenario. You can see what I mean in the instruction sheet:



The box art appears to show another light on the cabin roof in front of the periscope - but it is not shown in this diagram. The only lights are the cabin floor and the "contra-rotating eddy damper" on the stern!

This is how the module looks together (I haven't taken the glass off the sprue to stop scratches - the plastic is VERY soft).





My thoughts - now - are to dispense with the dive plane mechanism and move that central pillar in the cabin. That will let me close the roof off and free up the cabin floor for the central well and and the consoles around the side. I can also close off that hole for the bulb cover in the front floor which is roughly where Phones and Troy Tempests seats should go. So the next job - in progress as I type is to have a look through screen shots of the interior of the sub to get an idea of the layout and then of how to scratch build it.

I don't know anything about that show or boat !! I'm too young
but really interesting subject. I'll follow for sure

Looks like a fun build!

Oooh nice choice ill be following this one as i have one in my kit sanctuary, im going to be outrageous and put some resin ejector seats in mine , and im scouring ebay for a 'fish' that pursued it in the show , good luck with the build !

Norman wrote: Sun Jul 04, 2021 12:58 pm Oooh nice choice ill be following this one as i have one in my kit sanctuary, im going to be outrageous and put some resin ejector seats in mine , and im scouring ebay for a 'fish' that pursued it in the show , good luck with the build !

Cheers Norman!! I plan on doing the same.

Is this any use to you: https://www.ebay.co.uk/itm/Gerry-Anders ... 635-2958-0

Oh wow - would love to see you cram an interior in there if you can!

I hadn't appreciated that the upper hull was moulded completely clear.

Tomcat64 wrote: Wed Jul 07, 2021 11:30 am Oh wow - would love to see you cram an interior in there if you can!

I hadn't appreciated that the upper hull was moulded completely clear.

Certainly going to try!! May not complete by the build deadline though as the Great Upheaval occurs in 2 weeks.
The upper hull is actually a separate piece thus:



The clear section fits inside it. An odd idea but it fits quite well!

Twokidsnosleep wrote: Mon Jun 07, 2021 12:04 am We didn't get these puppet action shows in Canada
This one looks like the same guys as Thunderbirds?
As a kid in the 60's these would have been super cool..but not for Canada apparently

Yes, we did. Used to watch it regularly for a time in Northwestern Ontario, around Thunder Bay. I was about 6, so 1972ish. They ran Stingray, Joe 90 and maybe Thunderbirds.

iSteve wrote: Thu Aug 25, 2022 4:33 pm

Twokidsnosleep wrote: Mon Jun 07, 2021 12:04 am We didn't get these puppet action shows in Canada
This one looks like the same guys as Thunderbirds?
As a kid in the 60's these would have been super cool..but not for Canada apparently

Yes, we did. Used to watch it regularly for a time in Northwestern Ontario, around Thunder Bay. I was about 6, so 1972ish. They ran Stingray, Joe 90 and maybe Thunderbirds.

I meant the good coast of Canada