Global Scale Modeller

So as I've put the mustang away for a while, this gives me the chance to join Coens Kursk GB.

Can't start till midnight though

Been wanting to build this since the day I bought so real happy with that. Also got a pair of nice aires figures for it so a dio may be in the cards, I may add a Russian field car by tamiya and a muddy grassy field dio base. I've also got the akan paint set for this aircraft so hopefully it'll look spot on

Looks to be a nice kit. Good luck with the build, Paul.
Not got into Soviet planes yet, but this and those Eduard Lavs look good. Plenty of scope for new paint too.

Willem wrote:Looks to be a nice kit. Good luck with the build, Paul.
Not got into Soviet planes yet, but this and those Eduard Lavs look good. Plenty of scope for new paint too.

You know Will , I like Tamiya and Eduard kits , do not have any Russian also , but this IL 2 from Tamiya is one of my future buys , also I would like to do a limited edition of a Lav from Eduard , it is the one with the snake head , should be nice ,

But and about this build from Paul , this is a one to follow , to see the Master doing his Magic

Nice choice Paul ,real nice ...

Cheers fellas

I started this at midnight last night, been wanting to build this for some time now
Worked for about an hour on it last night, then from midday today almost straight through to now including a couple hours on Skype with coen and a few hours on a google + hangout i hosted and this is where its at now

Its a beauty of a kit, fit is almost perfect and the level of detail is really nice too.

I got all the cockpit parts built in to subsections and ready for paint. I've got the akan paint set for the IL2 and this includes the A14 steel grey interior colour.

All the parts ready for primer



The akan A14 interior grey colour


Cockpit sub assembles test fitted



And base painted, lovely colour and as usual thinned with Ultimate thinner the akan pants performed flawlessly.



Test fitting the fuselage seams


Picking out the cockpit detail with various colours of vallejo model colour and life colour, this was then cleared, the instrument decals applied and an oil wash applied



I then started building the lower fuselage and wing/roots again fit is brilliant.




And with the fuselage glued together the wings were glued in place too, excellent fit with barely any filler needed i think. Ill leave this to fully set over night and see whats what in the morning.


Forgot to get pics of the finished cockpit so tried to get some shots through the fuselage. Also shown are the decal seat belts which once matt cleared should look ok

That was quick! Looking good, mate!

Holy crud Paul she's a beauty. shake and bake kit is she ?

Holy crap, you go any faster on this kit and you'll go back in time!

Looks superb mate. I've been champing at the bit to start mine, so this might give me the nudge I need. Are you building OOB?

nice one paul always wanted to build this so u can inspire me

The build is going nicely Paul , the cockpit is looking good . Those new paints seems very good .

I wonder if that in the middle will be a gas tank or something ...now that should be nice if they and in the reall plane get hit there ...

About the kit reallly seems a pleasure to build , a really nice one to make a relax build ...

MakingModelsAgain wrote:Holy crap, you go any faster on this kit and you'll go back in time!

Looks superb mate. I've been champing at the bit to start mine, so this might give me the nudge I need. Are you building OOB?

Yeah totally oob, kit goes together like a dream, it'll just need a touch of filler On the leading edges and maybe on the fusalage seems in places

Darkblade88 wrote:Holy crud Paul she's a beauty. shake and bake kit is she ?

Yep no trouble with this thing yet, mind you the rrp is £55 so it should go together nice lol

rodrant wrote:The build is going nicely Paul , the cockpit is looking good . Those new paints seems very good .

I wonder if that in the middle will be a gas tank or something ...now that should be nice if they and in the reall plane get hit there ...

About the kit reallly seems a pleasure to build , a really nice one to make a relax build ...

Yeah it's was a quick simple build I needed to get back on track. The kit is superb well worth buying and the akan paints I can't recommend highly enough.

Looking good Paul, can't wait to see the camo go down.

What a super looking kit and a great start on it too. I love the idea of the figures and a staff car

So the build is flying along (sorry), the fit is superb, I've just needed a smudge of mr suffacer here and there the seems as almost flawless. Just one area needed some true filler and that wa son one of the horizontal stabilisers and it was a fault of my own that caused it being needed.

Its now ready for primer and should have paint soon

So bit of a leap forward with this, it was primed in ak grey primer, then pre shaded as usual.

The lower fuselage was painted in AMT 7 blue


I then set to work doing the camo work, using Akan Amt 1 light brown, Amt 4 Green and ANT 12 Dark grey. All thinned approx 10% with Ultimate thinner, the paints went down perfectly.







I made a start on the resin figures the other day too, assembly was fairly easy, they were primed in alclad black micro primer and i started painting the white eye outline last night in a hangout then got bored and built a 1/72 Jagdtiger instead lol

Cool!.....That 'vik is coming together nicely...looking forward to see the final result now!

Love the camo Paul looks stunning.

looking good paul like the camo and thats the paint i was on about..you got to love the ruskys

Got the figures painted up tonight, First time painting figures in 11 years and i sucked back then too lol. Happy with how the leather jacket turned out on the officer, the eyes went a bit pear shaped on the pilot, but never mind

What you on about?! Those figures look fantastic Paul! Top job

The bird is looking awesome Paul

Top drawer stuff with those 1/48 figures mate.... Excellent...
Hope mine come out half as good...
Well done buddy, and all painted while chatting on the Hangout/belch out.... lol...

Superb paint job, Paul, on both the plane and the figures.

Is the pilot practicing the front crawl in case he gets shot down?

Those figures look top drawer! The only change I'd make would be to matte the pants/trousers down, unless they are meant to have a shiny finish?

The one wearing the flying helmet and goggles looks like Michael Palin!

Lol Martin, there not finished yet, still got a wash to do and some tweaking here and there :0

Back working on the IL2 tonight, panel fading, bleaching and post shading.

Cant help think the green is overdone, will sleep on it (not the plane) and see how i feel tomorrow

You are a master painter mate really must start doing more panel fading it looks so good.

Nice paint job , looking great ! Master of the AirBrush

Great job Paul!! the day i finished this kit i promptly ordered another one. Its one of my favorite kits.. It goes together as good as any kit i have ever built.. You are certainly doing it justice. The great thing about Russian WW2 planes is the paintwork on the real ones seemed like they were different on every one.. They were not taken very good care of so you really cant go wrong with your colors.. I think it looks awesome. Impatiently waiting more updates... lol

Thanks fellas,should have another update at the weekend, I plan to decal it on Friday night

And yeah like you Clint, I plan to buy another one too

Great paint work Paul

So a bit more done to the paintwork i post shaded it today using tamiya smoke, next up clear coat then decals

Looks fantastic pal

Nice results m8

at first sight no need of washes but after a better look maybe a little one beneath. On the top no need everything looks sufficientely highlightened

keep up this great work.

See ya

Goose

So I toned down the post shading on the light brown, I thought it was too dark and a few comments helped me decide to tone it down.

Decals have been applied (all 10 of them) and clear coated over ready for a wash.



I built some wooden crates to go on the dio, they're 1/35 but scale doesn't really matter with them. 12 laser cut parts per crate and glued together with pva glue.







The figures were also gloss coated and a wash of brown oil given all over, including the skin tones, this was allowed to dry, then a black oil wash given to the clothing, once dry it was then flat coated and the figures are done

it is really nice Paul !

You mention that you use Tamiya Smoke as Post Shading , you use it diluted right ? or just out of the bottle ?

About the crates , they are very nice and will give a nice adition to the Dio , YOur figures are just great , all the leathers are really life like !

I agree that the one doing the manouvers with the hands really look like the Michael Palin

Again some great job Paul !

rodrant wrote:it is really nice Paul !

You mention that you use Tamiya Smoke as Post Shading , you use it diluted right ? or just out of the bottle ?

About the crates , they are very nice and will give a nice adition to the Dio , YOur figures are just great , all the leathers are really life like !

I agree that the one doing the manouvers with the hands really look like the Michael Palin

Again some great job Paul !

Hey buddy cheers

The Tamiya smoke was thinned 50/50 with Ultimate

Jaysus Paul! Those figures are stunning bud.
Better than anything that I've ever done and I do those things all the time and at 35th.
The Storm bird certainly darkened up under the gloss. Looks like a totally different plane now. Haha.
Looks excellent.

Thanks for the kind comments fellas

I picked these up today


Ill fill the back of the truck with some fuel barrels and crates, and I've ordered these guys I'm going to adapt and have unloading stuff off the truck


So i built the truck in a couple of hours, nothing too taxing and fitted together perfectly.


Chassis complete, I've left the chassis, cab, wheels and flatbed as separate units to allow easier painting and weathering.


Rolling chassis





The tailgate posed open


A mock up with some crates in the back


And i was asked to put something in to show the scale of the figures, so heres a tamiya bottle

That is soo F**ing cool bud!!! I really want to build on of those trucks in 35th now.... bastard!!!

Somebody bypassed the swear filter!! Lol......
While I'm here giggling at Mike's comment.... Excellent work Paul...
Love the figures.... And the truck..... Plane is looking mighty fine me too!!
Well done mate, keep it up...

I love the whole lot: IL2, truck, figures! The leather jacket is a masterpiece

Paul, awesome man, just awesome Hope you have the man cave reorganized and everything will fit

Thanks fellas

So the il2 was cleared after decals then a dark dirt was applied, and after drying wiped off

It's brought out the panel lines a treat









Started work on the cargo trucks cargo too, using three different size rb crates, each crate is made from approx 12 parts all cut from a laser cut fret. I then stained them using enamel burnt sienna for two and raw umber oil wash for the others. The barrels and jerry cans are almost ready for paint too

Looks fabulous mate!

Looking great there Comrade!

A true master piece.......cant wait to see it completed......great work!!!!!

Fantastic weathering there matey....
Love those figures, and that truck and the boxes are excellent...

looking real nice paul